Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #58628711

Tender For Addn Altn To Mini Hangar (Hangarette Store) And Allied Works At Af Stn Kumbhirgram

Issued by Statutory Bodies & Commissions/Committees · Cachar, Assam
Tender Value
42.89 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
19 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cachar → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Addn Altn To Mini Hangar (Hangarette Store) And Allied Works At Af Stn Kumbhirgram

BOQ

Name of Work:- ADDN ALTN TO MINI HANGAR (HANGARETTE STORE) AND ALLIED WORKS AT AF STN KUMBHIRGRAM
Sl. No. Item Description
1Dismantling of Plain or corrugated, etc steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
2S&F pre- painted galvalume aluminum zinc coating Gl Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed
3S&F pre- painted galvalume aluminum zinc coating Gl Based plan steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed
4S&F anodised aluminium snap grid frame work of 605 x 605 mm size of false ceiling all as specified and directed.
5M & L 6mm thick Non asbestos fibre cement building board fixed or laid in aluminium frame work with screws, as in ceiling complete all as specified and directed.
6Demolition of PCC (unreinforced) of any description and any position not otherwise specifically provided for all as specified and as directed.
7M&L Cement concrete 1:4:8Type D2 (using 40mm graded aggregate) as in foundation, filling and mass concrete.
8M&L for Brick work with sub class 'B' Old size bricks straight or corved plan exc 6 m mean radius built in CM (1:6) all as specified.
9M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as slabs supported on walls, beams and columns in floors, roofs landings, balconies, canopies, deck slabs and in shelves and the likeetc.all as specified and directed.
10M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, includiing cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.
11M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, includiing cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.
12M&L formwork to sides and soffits of floor or roof beams,beam haunching,girders, bressummers, lintels,cantilvers,shelves,including sup-ports,overhangs,lintel bend, beams etc finished rough surfaces of concrete complete all as specified.
13Taking down cement plaster of any description from brick/ stone walls surfaces including, racking out joints, hacking for key, scrubbing down with water etc. and removing debris to a distance n.exc. 50 m, complete all as specified and directed.
14Material and labour for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6), finished even and smooth without using extra cement, complete all as specified and directed
15Materials and labour for rendering 15mm thick cement plaster on in two layers each of 10+5mm thick in Cement Mortar (1:4) with Liquid water proofing compound @ 200ml/50Kg of cement on fair faces of brick work complete all as specified and directed. (Note Integral water proofing compound shall be measured and paid separately).
16Supply only Liquid water proofing compound confirming to relavent IS MAKE : Dr. Fixit of M/s PIDILITE INDSTURIES or equivalent
17Material and labours for two coat of oil bound distemper over a coat of chalk whitening on newly plastered surfaces of walls incl. necessary preparation of surfaces all as specified and directed.
18Material and labour for preparation of newly plastered surfaces of walls applying two coats of exterior emulsion paint of weather coat camouflage pattern including one coat of emulsion primer and preparation of surfaces on wall/roof surface all as specified and directed . ( Note :- Camouflage pattern shall be approved by Engr-in-Charqe)
19Material and labour for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of oil emulsion distemper complete all as specified and directed.
20Complete removal of existing treatment including washing, rubbing down and stopping of existing surfaces and applying two coats of exterior emulsion paint of weather coat camouflage pattern including one coat of emulsion primer and preparation of surfaces on wall/roof surface all as specified and directed . ( Note :- Camouflage pattern shall be approved by Enqr-in-Charge)
21Materials and labour for 50 mm thick PCC 1:3:6 type C2 using 40mm mm graded stone agg. as in plinth protection complete all as specified and as directed.
22S & F for anodised aluminium frame for partition, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. Make of aluminium section - JINDAL/ INDAL/ HINDALCO
23S&F for aluminium door shutter, aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles (02 Nos) in each door, hinges, sliding roller, anodised aluminium snap beading, screws etc, complete all as specified and directed. Make : Make of aluminium section -JINDAL/ INDAL/ HINDALCO
24S&F for 12mm thick prelaminated particle board fixed with aluminium snap beading to aluminium frame complete all as specified and directed
25S&F for 5.5mm Sheet glass, ordinary quality and glazing with oil putty in square but exc 0.5 sq. m in each pane, and aluminium partition including aluminum snap beading and rubber packing etc, including solar control film 25 micron thick, reflective type, sticked to glass panes as per manufacturer’s instruction, complete all as specified and directed. Make : MODI/ SAINT GOBAIN/ ATUL/ TRIVENI
26S&F mortice lock, brass, 4 levers type, size 100mm complete all as specified and as directed.
27S&F in repair PVC Eaves board size 250 mm x 18 mm thick, over lapping with solvent cement and fixing by stainless steel screw.complete all as specified and as directed
28M&L for Preparation of old painted steel surfaces, roof sheet surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
29Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified by Engr-in-Charge.
30Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point and depositing where directed by Engr-in-Charge.
31M & L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified by Engr-in-Charge
32M & L for 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base, sub floor and paving etc. complete all as specified by Engr-in-Charge.
33M&L for sand cushioning 25mm thick over hardcore/Concrete surfaces, spread all as specified.
34M & F for Machine pressed precast concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified by Enqr-in-Charqe. Please Enable Macros to View BoQ information
35M & F for Machine pressed precast concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified by Enqr-in-Charqe. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58628711
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 42.89 Lakhs
LAST DATE 10-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Addn Altn To Mini Hangar (Hangarette Store) And Allied Works At Af Stn Kumbhirgram
Basic Detail
Tender No 9161
Bidding Type Tender
Location
City Cachar
State Assam
Key Dates
Publish Date 19 Nov 2026
Submission Date 10 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 42.89 Lakhs
Tender Fee 500
EMD 86000
Exemption Available
Document List
1690586b-91d1-4e9f-b3cd-9a230b918ab6.html
9161tender.pdf
BOQ_896977.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
html

1690586b-91d1-4e9f-b3cd-9a230b918ab6.html

pdf

9161tender.pdf

xls

BOQ_896977.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender