Tender For Stmc Work For 1 No. Of Road For A Length Of 18.861 Km Under Baragada (R And B) Division (Package-I)
Tender Value
49.01 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
49015
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stmc Work For 1 No. Of Road For A Length Of 18.861 Km Under Baragada (R And B) Division (Package-I)
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of I m above ground level and removal of rubbish up to a distance of 50 Sqm m outside the periphery of the area cleared. |
| 2 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading. grading to required slope and compacting to meet requirement of table 300-2. |
| 3 | Providing compacted granular materials in shoulder by using moorum as per Clause 407 of MoRT&H Specifications for Road & Bridge works (4th Revision). |
| 4 | Clearing slab/box type culverts and pipe culverts including clearing, cleaning and reshapping of upstream and down stream faces of these culverts with in right of way. The job includes disposal of excess material recovered from site including vegetation outside ROW with all leads and lifts complete in all respect as per direction of Engineer In-Charge. (Frequency of cleaning will be one time in a year i.e. before start of monsoon). Slab/Box Type Culverts. |
| 5 | Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc (a) 5th KM Stone |
| 6 | Reinforced cement concrete M-15 Grade Kilometre stone of standard designs as per RC-8-1980 Fixing in position including painting & printing etc complete (b) Ordinary Kilometre Stones |
| 7 | Supplying, fitting, fixing of roads sign board as per approve drawing including cost, conveyance, royality, taxes of all materials, labour, T & P etc. providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC: 67-2010 made of A.C.P. (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4mm and aluminum thickness of 0.5mm on both sides as per requirement in table 6.1 of IRC-67/2010 and as per technical specifically of clause 801.3 supported on a mild steel angle iron post 75mm x 75mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 40cm x 40cm x 60cm. 60cm below ground level as per approved drawing including excavation, curring etc. complete under the supervision of Engineer-in-charge.80 cm x 60 cm rectangular |
| 8 | 90 cm x 30 cm rectangular (Object Hazard) |
| 9 | 90 cm Octagonal (STOP) |
| 10 | Chevron (60 cm x 50 cm rectangular) |
| 11 | 60 cm circular |
| 12 | 90 cm circular |
| 13 | Alluminium retroreflectories sheet 100 mm x 100 mm fitted lens hreflector |
| 14 | Painting on Existing CD structuresScraping old paint by scrapers, sand papering and washing with soap water etc complete |
| 15 | White Washing |
| 16 | ainting two coats after filling the surface with synthetic enamel paint in all shades on new/old un plastered concrete surfaces |
| 17 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MORT&H Specifications for Road & Bridge works |
| 18 | Providing and laying Bituminous Macadam using crushed aggregate of grading-2 materials premixed with bitumenous binder, transported to site, laid over a previous prepared surface with hydrostatic paver finisher with sensor control to the required grade and level and alignmentand rolled as per Clause No.-501-6 and 501-7 to achive the desired compaction as per Clause 504 of MoSRT&H Specifications for Road & Bridge works (4th Revision) |
| 19 | Providing and laying Semi Dense Bituminous Concrete using crushed aggregate of grading-2 materials premixed with bitumenous binder@ 4.50 to 5.00% of mix and filler, transport the hot mix to work site, laying with a hydroststic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tendem rollers to achieve the desired compaction as per MoRT&H Clause No. 508 of MoSRT&H specifications for Road & Bridge works (4th Revision) |
| 20 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer. at the rate of 0.60 kg/sqm using mechanical means as per Clause 502 of MoRT&H Specifications for Road & Bridge works (4th Revision). |
| 21 | Providing and applying Tack Coat with 60/70 penetration grade of bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender