Tender For Development Of Riverfront Protection Wall With Integrated Alati Pinda, Ghat Steps And Pedestrian Walkway At Aradi Jetty Area In Bhadrak District, Odisha.
Tender Value
4.83 Crore
Estimated cost
Bid Submission
07 Dec 2026
15 days left
EMD
4.84 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadrak → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Riverfront Protection Wall With Integrated Alati Pinda, Ghat Steps And Pedestrian Walkway At Aradi Jetty Area In Bhadrak District, Odisha.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used. ( for river front and west & east walkway ) |
| 2 | Earth work in slushy soil (in water upto 0.6m depth requiring the aid of pan and vassels) with in 50m. initial lift as per the direction and approved by the department. ( for river front slope portion) |
| 3 | Earth work in excavation of hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in charge. ( for grade and tie beam ) |
| 4 | Earth work in filling of ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles, including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete as directed by the Engineer-in-charge.( for river front and west & east walkway ) |
| 5 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2( for west & east walkway ) |
| 6 | Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, preading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)( for west & east walkway ) |
| 7 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction with Sand filling 30mm thick (laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.( for west & east walkway ) |
| 8 | Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.( for west & east walkway ) |
| 9 | Filling foundation & Plinth with Coarse Sand including all cost as directed by the Engineer-in-Charge. |
| 10 | Providing and laying of Filter media with stone crushed aggregates of 45 mm size satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment , wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. (Below Water & Extra time consuming for tidal influence)Inside of Z Sheet Pile |
| 11 | P.C.C of (1:3:6 ) with 4 cm down H.G.C.B metal includig hoisting, laying, compacting, curing and wateringetc. with all t&P required for the work including cost con veyance royality and all other taxes of materials compeltein all respect as per Engineer in charge. |
| 12 | Supplying, fitting, fixing, Placing and driving of Z Type sheet pile using MS plate in position upto required depth for protection of weir including cost, conveyance all materials & cost of all labour etc complete as per approved deawing & technical specifications and section 1100 & 1900 of MORT&H specifications for Road & Bridge works (5th Revision) ( Z Type Sheet Pile at River & land side) |
| 13 | Provide, bring to site and install in position at first pile location, all the plants and equipments necessary for bored cast in situ piling work and removing the said plants and equipments after completion of piling work including cost of transportation, labour, labour cess & all other taxes etc. complete in all respect as per direction of Engineer-in-Charge. |
| 14 | Boring piles to the required depth through all types of soil strata including hard rock if any up to the founding level and stacking the bored soil at convenient place and transport to dispose the same at low lying area outside the working area with cleaning & washing the bore including cost of bentonite solution, labour, labour cess, tools, equipments, required to complete in all respect as per direction of the Engineer’-in-charge. |
| 15 | Providing and placing designed mix cast-in-situ RCC M30 using 20 mm down graded black hard granite crusher broken chips for piles using tremmie method up to cut off level underneath the bentonite slurry including all sampling, testing and records with watering and laying as per IS codes 456 and 516. including cost, conveyance, royality, labour, Labour Cess, T&P and all other taxes etc. required to complete the work in all respect as per specification and direction of the Engineer in charge. |
| 16 | Cutting and dressing pile heads to required line and level and /or as directed and stacking the debris at convenient place and transport the same to any low lying area outside the working area and all associated cleaning of projecting reinforcements including all labour, labour cess, materials, tools, equipments etc., complete in all respect as per direction of the Engineer’-in-charge. |
| 17 | R.C.C. M-30 for foundation with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 18 | R.C.C. M-35 for Pile Muff with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. (Below Water & Extra time consuming for tidal influence) |
| 19 | R.C.C. M-35 for Beam with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. (Below Water & Extra time consuming for tidal influence) |
| 20 | R.C.C. M-35 for Column with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 21 | R.C.C. M-35 for Wall with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. (Below Water & Extra time consuming for tidal influence) |
| 22 | R.C.C. M-35 for Slab with 20 mm. down graded black hand granite crushed broken stone chips including shuttering, staging, cost of conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 23 | Brick work with Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:3) in foundation and plinth. |
| 24 | Supplying, fabricating and placing of HYSD (FE-415)/ (FE-500) grade steel for Pile Cage including cutting , bending, binding & welding and laying in position with cost, conveyance, taxes of HYSD steel and binding wires 18 to 20 gauge with all labour,labour cess, T&P, cage lowering, equipments etc., complete in all respect as directed by the Engineer in charge.(Brand of Steel - SAIL/RNL/TATA/SHYAM ) |
| 25 | Supplying, fabricating and placing of HYSD (FE-415) /(FE-500) grade steel for foundation, Sub/Super structure including cutting , bending, binding & welding and laying in position with cost, conveyance, taxes of HYSD steel and binding wires 18 to 20 gauge with all labour,labour cess, T&P, cage lowering, equipments etc., complete in all respect as directed by the Engineer in charge.(Brand of Steel - SAIL/LRNL/TATA/SHYAM ) |
| 26 | Supplying, fabricating and placing of HYSD (FE-415) /(FE-500) grade steel for foundation, Sub/Super structure including cutting , bending, binding & welding and laying in position with cost, conveyance, taxes of HYSD steel and binding wires 18 to 20 gauge with all labour,labour cess, T&P, cage lowering, equipments etc., complete in all respect as directed by the Engineer in charge.(Brand of Steel - SAIL/LRNL/TATA/SHYAM ) (Below Water & Extra time consuming for tidal influence) |
| 27 | Supplying fixing RCC Precast baluster (115 mm Dia & 610 mm to 760 mm tall including laying in position with cost, conveyance, taxes of with all labour,labour cess, T&P, etc., complete in all respect as directed by the Engineer in charge. |
| 28 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matchinging the stone shade : (To be secured pins which shall be paid for separately) : Red sand stone 30mm Thickness - exposed face fine dressed with rough backing. |
| 29 | certified) , BMS, MPPT charge controller, PIR sensor( when there will be no movement the lumens output will be 30% output).The solar panel and battery should be designed to provide 2 days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 08 and having lumen output of >=11400 lumens as per LM 79 report third party/central/state govt accredited NABL lab to justify the lumen output & lumen efficacy . Lenses should be provided on the LED chip for better lighting dstribution to avoid glare on human eyes. Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party central/state govt accredited NABL lab reports to justify the lumen efficacy,luminaire output , IK 08 and IP 65 protection.The Luminaire should be supplied along with adjustable type mounting bracket which can be fitted directly on the pole.The Solar lighting manufacturer must submit the declaration letter by mentioning that complete solar light and the solar panel are manufactured in India and warranty certificate on their company's letterhead by mentioning warranty period as 5 years and necessary aftersales Service will be provided through their tollfree base service network located within 100 KM from the project site. The Solar Street light manufacturer should have own NABL accredieted laborotory. The following test reports must be submitted and approved for the technical acceptance of the products.1.LM 79 REPORT and LM 80 Report ( from third party/central/state govt accredited NABL lab of AIO solar light) , 2. IK 08 ( from third party/central/state govt accredited NABL lab of AIO solar light ) , 3. IP 65 (Report of third party/central/state govt accredited NABL lab of AIO solar light 4. EN50530 – MPPT Efficiency , 5. IEC61547 , 6. IEC61000-3-2 – EMC , 7. IEC 60598-2-3 ,8. IEC 62109-1, ( The necessary test reports of third party/central/state govt accredited NABL lab from sl no. 4 to sl no.8 must be submitted for any wattage of AIO solar light )Make-(K-LITE/Philips/LT/HALONIX/Havells/Bajaj/RYTEK/Wipro ). NB: The cost includes 5 years CMC including repair/ Maintenance/ replacement of the product in case of any defect. |
| 30 | Supply of 8 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 155 MM A/F of 4 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakarangee as per direction of Engg. in Charge. |
| 31 | Installation of 60W AIO LED solar street light on 8 mtr octagonal pole. |
| 32 | SITC of Street light- 120W,130 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66, IK 08 roadway luminaire with high power LED as light source with acrylic cover(Make:K-LITE/Philips/LT/HALONIX/Havells/Bajaj/RYTEK/Wipro ) (5Years Warranty) |
| 33 | Supply of 8 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel(with decorative single arm) as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 155 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakarangee as per direction of Engg. in Charge. |
| 34 | Supply of 8 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel(with decorative DOUBLE arm) as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 155 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakarangee as per direction of Engg. in Charge. |
| 35 | Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge. |
| 36 | STREET LIGHT: S/ I/ T & Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 63A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 63 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,04 nos 16A 4P MCB,C,10KA as outgoing MCB legrand dx3/ schneider acti9 A9N/ Siemens betaguard/ ABB ( SB 200) as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 1 years of acceptance of materials |
| 37 | Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster of following size cables as per direction of Engg.-in-Charge. |
| 38 | 3.5 core x 25 sq mm Aluminium armoured Cable.(FOR street PANEL) |
| 39 | 4 core x 10 sqmm A2XFY |
| 40 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysDec 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender