Water Resources and Irrigation Government Departments Closing in 8 days TDR #58628458

Tender For Reinforcement Work Of Palachakada - Ii & Palachakada - Iii Rl Projects Under Hindol Block In Dhenkanal District (Pkg. No. 37)

Issued by Government Departments · Dhenkanal, Odisha
Tender Value
10.11 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
10116
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dhenkanal → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Reinforcement Work Of Palachakada - Ii & Palachakada - Iii Rl Projects Under Hindol Block In Dhenkanal District (Pkg. No. 37)

BOQ

Name of Work:- REINFORCEMENT WORK OF PALACHAKADA - II & PALACHAKADA - III RL PROJECTS UNDER HINDOL BLOCK IN DHENKANAL DISTRICT (Pkg. No. 37)
Sl. No. Item Description
1Earth work excavation in foundation in hard soil with 50 mtr initial lead 1.5 m initial lift including rough dressing and breaking clods to 2 cm to 7 cm and laying in layers not exceeding 0.3 m in depth as per direction of Engineer-in-charge
2Filling foundation and plinth with sand watered and rammed as per direction of Engineer-in-charge.
3Cement concrete (1:4:8) with 4 cm size h.g metal as per direction of engineer-in-charge.
4Cement concrete (1:2:4) with 12 cm size h.g Chips as per direction of engineer-in-charge.
5Brick work with K.B Brick (25cmx12cm x8 cm) having crushing strength not less than 35kg/cm with dimensional tolerance ± 5% in cement mortar (1:6) in foundation and plinth.
612mm thick cement plaster (1:6 ) over brick masonary
7Cement Concrete (1:2:4) with 12 mm size HG chips for R.C.C Works.
8Supplying, fitting and placing oncoated HYSD (TISCON) bar reinforcement complete as per drawing and technical specification including cutting, binding, bending and cost of binding wire.
9Rigid and smooth centering and shuttering for RCC work including false work and dismentalling them after casting including cost of materials complete.
10Roof Slab & Chajja
11Filling F & P with excavated materials, moorum including watering and ramming as directed by the engineer-in-charge
12Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
13Supplying of unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms.cc, of straight length of 6 (six) meter for portable water suppliers conforming to IS-4985/2000 of BIS- Amendment 2 read with Table =1 of IS specification bearing ISI marks for working pressure CI -IUO=PVC pipe to withstand pressure of 2.50 Kgf/sqcm , 4.0 Kgf/sqcm , 6.0 Kgf/sqcm , 8.0 Kgf/sqcm and the specification and manufacturer name should be prominenity marked on body of each pipe as per the latest Amendment of IS 4985.it includes the cost of sockets in case of plain ended pipe PDI test are to be conducted and should be marked on body of each pipe and report is to be obtained from CIPT, Bhubaneswar/ EPM, Orissa, Bhubaneswar necessary approval of authority including transporotation and laying at site all complete with cost of solvent cement.
14160 mm dia (Class-I)
15200 mm dia (Class-I)
16Labour charge for laying and fitting 160mm PVC pipe
17Labour charge for laying and fitting 200mm PVC pipe
1810 HP Monoblock centrifugal pump set at total of 16mtr capable to discharge 1700 LPM squirrel cage induction motor fitted with companion flanges and class -F insulation suitable for operation 415 volt+6%-15%, 3phase, 50Hz AC power supply and full load current 15.6 amp with size of suction and delivery 100mmx100mm dia with overall efficiency 60 -65. The materials of construction as given below.a) Casing :F.C. 200 as per IS 210/1978 b) Impeller : Bronze grade LTB-2 of IS c) Shaft : High carbon steel grade 40c8 of IS 1570(Part-2)318/1981 d) GAsket : As per IS 5120/1977 and the pump sets must be as per IS-9079/2002 of reputed brand having wide dealership net work for easy availability of spares.
19Supplying fitting fixing control pannel starter, BCH make with arrangement of volt meter, Amp, Meter mfitted with MCB control switch complete including indicator lamp with irrigation pannel bozard of apaproved design made out of 16gauge CR sheedt basement MS angle with double lock powder coat painting over one coat primere including fixing danager board with lucking devices and fixing of suitable stand for control pannel unit.
20Motor hood cover of 18 gauge C.R. sheet with double coat painting over one coat primer so as to cover the motor
21MS base plate for fitting of pannel and pump as per sample as per direction of Engineer-in-charge.
223 x 16 sqm Tarpodar Cable XLPE (Cross like polythylin) confirming to IS-7098 (Part-II) including laying below 9 mtr of the ground & fitting the excavated materials including watering & ramming.
2363/100 AMP 415 volt T.P. main switch confirming to IS 4064 (Pt-I & Pt-II) with utilisation category Ac-22.
24Supply, fittintg and placing of 100mmdia Nominal Bore GI pipes having wall thickness 4.5 mm electrical resistance welded of medimum class confirming to IS-1239 (part-I/2004) with latest amendments, screwed at both ends as per IS-554 socketed at 1 end and other end protected with plastic threaded protector. The socket confirming IS-1239 (Part-II/1992) with latest amendments in rendom length of 4 to 7 mtrs. Each pipe should bear ISI certification and manufacturers name /trade mark.
25Labour charges for fitting, fixing of suction, delivery fitting including M.S. Tee set, NR valve, Switch valve and Air release valve etc minor welding transportation of materials to site etc. including nut, bolt rubber insallation etc complete.
26Fabrication of special joint including cutting and welding of pipes out of M.S Pipe / G.I Pipe including welding of flange at one end and other end suitable for for connection to delivery pipe lines of pump sets including cost of cutting and welding , materials and fitting it in proper alignment with the delivery pipe line of pump set etc. complete.
27100mm dia C.I. Screw base foot valve (Kirloskar make ) IS
28100mm dia G.I. bend IS No 1239 (Part-II/1992)
29100mm dia G.I. flange IS No 6392/1971
30100mm dia G.I. Socket IS No 6392/1972
31100 mm dia C.I. N.R valve IS No 5312 (Part-I) with ISI mark
32100x100x100mm dia G.I. Tee with Plug for Priming set
33200mm dia PVC end cap confirming to I\PL-R PVC-IS 2000 F
34160mm dia PVC end cap confirming to I\PL-R PVC-IS 2000 F
35110 mm dia PVC FTA.
36Cost of Nut Bolt.
37Cost of Rubber Insertion.
38160x160x110mm MS Tee set with bend,closing and opening arrangement
3950mm dia C.I. Air Release Valve IS Mark 14845(SI)with 1 mtr long G.I.Short piece with saddle
40200x200x160mm PVC Tee (6 Kgf/sqcm) confirming to PL-R PVC-IS 2000F
41200x110mm dia PVC Reducing Socket.
42160x160x160mm PVC equal Tee (6 Kgf/sqcm) confirming to PL-R PVC-IS 2000F
43Earth work excavation in foundation in hard soil with 50 mtr initial lead 1.5 m initial lift including rough dressing and breaking clods to 2 cm to 7 cm and laying in layers not exceeding 0.3 m in depth as per direction of Engineer-in-charge
44Filling foundation and plinth with sand watered and rammed as per direction of Engineer-in-charge.
45Cement concrete (1:4:8) with 4 cm size h.g metal as per direction of engineer-in-charge.
46Cement concrete (1:2:4) with 12 cm size h.g Chips as per direction of engineer-in-charge.
47Brick work with K.B Brick (25cmx12cm x8 cm) having crushing strength not less than 35kg/cm with dimensional tolerance ± 5% in cement mortar (1:6) in foundation and plinth.
4812mm thick cement plaster (1:6 ) over brick masonary
49Cement Concrete (1:2:4) with 12 mm size HG chips for R.C.C Works.
50Supplying, fitting and placing oncoated HYSD (TISCON) bar reinforcement complete as per drawing and technical specification including cutting, binding, bending and cost of binding wire.
51Rigid and smooth centering and shuttering for RCC work including false work and dismentalling them after casting including cost of materials complete.
52Roof Slab & Chajja
53Filling F & P with excavated materials, moorum including watering and ramming as directed by the engineer-in-charge
54Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
55Supplying of unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms.cc, of straight length of 6 (six) meter for portable water suppliers conforming to IS-4985/2000 of BIS- Amendment 2 read with Table =1 of IS specification bearing ISI marks for working pressure CI -IUO=PVC pipe to withstand pressure of 2.50 Kgf/sqcm , 4.0 Kgf/sqcm , 6.0 Kgf/sqcm , 8.0 Kgf/sqcm and the specification and manufacturer name should be prominenity marked on body of each pipe as per the latest Amendment of IS 4985.it includes the cost of sockets in case of plain ended pipe PDI test are to be conducted and should be marked on body of each pipe and report is to be obtained from CIPT, Bhubaneswar/ EPM, Orissa, Bhubaneswar necessary approval of authority including transporotation and laying at site all complete with cost of solvent cement.
56160 mm dia (Class-I)
57200 mm dia (Class-I)
58Labour charge for laying and fitting 160mm PVC pipe
59Labour charge for laying and fitting 200mm PVC pipe
6010 HP Monoblock centrifugal pump set at total of 16mtr capable to discharge 1700 LPM squirrel cage induction motor fitted with companion flanges and class -F insulation suitable for operation 415 volt+6%-15%, 3phase, 50Hz AC power supply and full load current 15.6 amp with size of suction and delivery 100mmx100mm dia with overall efficiency 60 -65. The materials of construction as given below.a) Casing :F.C. 200 as per IS 210/1978 b) Impeller : Bronze grade LTB-2 of IS c) Shaft : High carbon steel grade 40c8 of IS 1570(Part-2)318/1981 d) GAsket : As per IS 5120/1977 and the pump sets must be as per IS-9079/2002 of reputed brand having wide dealership net work for easy availability of spares.
61Supplying fitting fixing control pannel starter, BCH make with arrangement of volt meter, Amp, Meter mfitted with MCB control switch complete including indicator lamp with irrigation pannel bozard of apaproved design made out of 16gauge CR sheedt basement MS angle with double lock powder coat painting over one coat primere including fixing danager board with lucking devices and fixing of suitable stand for control pannel unit.
62Motor hood cover of 18 gauge C.R. sheet with double coat painting over one coat primer so as to cover the motor
63MS base plate for fitting of pannel and pump as per sample as per direction of Engineer-in-charge.
643 x 16 sqm Tarpodar Cable XLPE (Cross like polythylin) confirming to IS-7098 (Part-II) including laying below 9 mtr of the ground & fitting the excavated materials including watering & ramming.
6563/100 AMP 415 volt T.P. main switch confirming to IS 4064 (Pt-I & Pt-II) with utilisation category Ac-22.
66Supply, fittintg and placing of 100mmdia Nominal Bore GI pipes having wall thickness 4.5 mm electrical resistance welded of medimum class confirming to IS-1239 (part-I/2004) with latest amendments, screwed at both ends as per IS-554 socketed at 1 end and other end protected with plastic threaded protector. The socket confirming IS-1239 (Part-II/1992) with latest amendments in rendom length of 4 to 7 mtrs. Each pipe should bear ISI certification and manufacturers name /trade mark.
67Labour charges for fitting, fixing of suction, delivery fitting including M.S. Tee set, NR valve, Switch valve and Air release valve etc minor welding transportation of materials to site etc. including nut, bolt rubber insallation etc complete.
68Fabrication of special joint including cutting and welding of pipes out of M.S Pipe / G.I Pipe including welding of flange at one end and other end suitable for for connection to delivery pipe lines of pump sets including cost of cutting and welding , materials and fitting it in proper alignment with the delivery pipe line of pump set etc. complete.
69100mm dia C.I. Screw base foot valve (Kirloskar make ) IS
70100mm dia G.I. bend IS No 1239 (Part-II/1992)
71100mm dia G.I. flange IS No 6392/1971
72100mm dia G.I. Socket IS No 6392/1972
73100 mm dia C.I. N.R valve IS No 5312 (Part-I) with ISI mark
74100x100x100mm dia G.I. Tee with Plug for Priming set
75200mm dia PVC end cap confirming to I\PL-R PVC-IS 2000 F
76160mm dia PVC end cap confirming to I\PL-R PVC-IS 2000 F
77110 mm dia PVC FTA.
78Cost of Nut Bolt.
79Cost of Rubber Insertion.
80160x160x110mm MS Tee set with bend,closing and opening arrangement
8150mm dia C.I. Air Release Valve IS Mark 14845(SI)with 1 mtr long G.I.Short piece with saddle
82200x200x160mm PVC Tee (6 Kgf/sqcm) confirming to PL-R PVC-IS 2000F
83200x110mm dia PVC Reducing Socket.
84160x160x160mm PVC equal Tee (6 Kgf/sqcm) confirming to PL-R PVC-IS 2000F
85Electrical Earthing with 40mtr dia medium duty GI earthing pipe each 3 m longwith installation including cost of all materials like GI flange chorcoat, salf etc. as required as per I.E Rule
86Other Electrical materials such as pvc tape.7/20pvc copper wire 3/20 pvc copper wire G.I flxible condite pipe no 6 GI wire copper cable socket GI socket and petty materials required for electrical installation. All materials should be as per IS including fitting charges and electrical installation & energisation. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58628458
AUTHORITY Government Departments
TENDER VALUE 10.11 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender for Reinforcement Work Of Palachakada - Ii & Palachakada - Iii Rl Projects Under Hindol Block In Dhenkanal District (Pkg. No. 37)
Basic Detail
Tender No EE/OLIC/DKL-02/2026-27
Bidding Type Tender
Location
City Dhenkanal
State Odisha
Key Dates
Publish Date 20 Nov 2026
Submission Date 30 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value 10.11 Lakhs
Tender Fee 7080
EMD 10116
Exemption Available
Document List
BOQ_622555.xls
eaf0f7a2-1583-45e3-b117-4d83b415cd46.html
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_622555.xls

html

eaf0f7a2-1583-45e3-b117-4d83b415cd46.html

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender