Tender For Construction Of Barrack At Nrusinghnath Under Nrusinghnath Range For The Year 2026-27
Tender Value
29.67 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
29680
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Barrack At Nrusinghnath Under Nrusinghnath Range For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge. |
| 2 | Supplying filling in foundation and plinth with sand including watering ramming, cost, conveyance, royalties and all taxes of materials and cost of labour with T&P required for the work etc. complete (measurement will be taken on finished section only etc.as direction of the Engineer-in-charge. |
| 3 | Cement concrete M10 grade with crushed granite coarse aggregate of size 40mm down graded mixed in batching and mixing plant including cost of all materials, machineries and labour for materials up to mixing yard and transportation of mixed concrete within initial lead of 1km by mechanical means and laying in dams, barrages, power house and pen stock with all lifts/delifts upto 1.5m height above average ground level as per direction of Engineer-in-charge. (Cost of transportation of materials to be added) |
| 4 | Brick masonary in cement mortar (1:6) using Flyash Bricks of size 25cmx12cmx8cm having crushing strength not lessthan 75 Kg/Cm2 in foundation & plinth after immersing the bricks for six hours in water before use in superstructure in all florrs with all necessary etc. as direction of the Engineer-in-charge. |
| 5 | Brick masonary in cement mortar (1:6) using Flyash Bricks of size 25cmx12cmx8cm having crushing strength not lessthan 75 Kg/Cm2 in super structure after immersing the bricks for six hours in water before use in superstructure in all florrs with all necessary etc. as direction of the Engineer-in-charge. |
| 6 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying as directed by the Engineer-in-charge |
| 7 | Column base & footing |
| 8 | Column up to roof |
| 9 | Plinth beam |
| 10 | Roof beam |
| 11 | Lintel band |
| 12 | Chajja |
| 13 | Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire etc. as direction of the Engineer-in-charge. |
| 14 | 16mm(5/8\\") thick cement plaster (1:6)in finished smooth to inside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour etc. as direction of the Engineer-in-charge. |
| 15 | 12mm(1/2\\") thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour etc. as direction of the Engineer-in-charge. |
| 16 | 6 mm thick cement plaster in cement mortar(1:4) to RCC surface finished Smooth including deep chipping and slurry treatment including punning Including cost, conveyance & royality of materials etc. as direction of the Engineer-in-charge. |
| 17 | Fixing tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. (Ceramic Wall Tile) as per the direction of Engineer in Charge. |
| 18 | Fixing tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile as per the direction of Engineer in Charge. |
| 19 | 2.5cm thick artificial stone flooring with cc (1:2:4) including punning using 12mm size hard granite chips as direction of the Engineer-in-charge. |
| 20 | Supplying Fitting & fixing of M.S doors, windows,grill & grill gate including cost of all materials, cost of all labour,T&P required for the work etc. complete as per the direction of Engineer in Charge. |
| 21 | Painting two coats in all floors to new wood and iron work over a coat of primer including sand papering,polishing the surface,including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paint as per direction of the Engineer-in-charge. |
| 22 | Finishing walls with two coats of water proofing cement paint of approved shade including cost of cement paint, cost of all labour T&P required for the work etc. complete as per direction of Engineer In Charge. |
| 23 | Finishing wall surface of walls with Acrylic putty ( Water based) of approved make & finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes etc. Complete as per the direction of Engineer-in charge. |
| 24 | Reinforced Cement Concrete (1:2:4) with 12mm size hard granite chips having a minimum comprresive strength (in work test) 250 kg/Cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS 516 including hoisting etc. as direction of the Engineer-in-charge. |
| 25 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm diaof 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification , buffling, Polishing etc with cost, conveyance, taxes of all materials, labour, T&p etc. Required for the complete as direction of the Engineer-in-charge. |
| 26 | Rigid and smooth centering and shuttering for RCC works including false works and dismantling them after casting including cost of materials complete in ground floor as per the direction of Engineer in Charge. |
| 27 | RCC foundation,plinth bands and footing bases of columns mass concrete pre cast slabs |
| 28 | RCC floor,Roof slab,landings,balconies,projecting sunshades and chajjas |
| 29 | RCC beams,columns,girders and bressmer |
| 30 | RCC Lintels |
| 31 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design & quality including cost of all door fittings & fixture etc.complete as per the direction of Engineer-in charge. |
| 32 | Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 151-154,151-155, as windows frame section No 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including lucking arrangement including all fitting including cost of materials all taxes , labour , T&P etc complete as per the direction of Engineer-in charge. |
| 33 | Supplying, fitting and fixing of 32mm thick PVC door shutter with approved quality of approved design & quality including cost of all door fittings & fixture etc.complete as per the direction of Engineer-in charge. |
| 34 | Brick masonary in cement mortar (1:6) using Flyash Bricks of size 25cmx12cmx8cm having crushing strength not lessthan 75 Kg/Cm2 in super structure after immersing the bricks for six hours in water before use in superstructure in all florrs with all necessary etc. as direction of the Engineer-in-charge. |
| 35 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying as directed by the Engineer-in-charge |
| 36 | Column up to roof |
| 37 | Roof beam |
| 38 | Lintel band |
| 39 | Chajja |
| 40 | Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire etc. as direction of the Engineer-in-charge. |
| 41 | 16mm(5/8\\") thick cement plaster (1:6)in finished smooth to inside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour etc. as direction of the Engineer-in-charge. |
| 42 | 12mm(1/2\\") thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour etc. as direction of the Engineer-in-charge. |
| 43 | 6 mm thick cement plaster in cement mortar(1:4) to RCC surface finished Smooth including deep chipping and slurry treatment including punning Including cost, conveyance & royality of materials etc. as direction of the Engineer-in-charge. |
| 44 | Fixing tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile as per the direction of Engineer in Charge. |
| 45 | Fixing tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. (Ceramic Wall Tile) as per the direction of Engineer in Charge. |
| 46 | 2.5cm thick artificial stone flooring with cc (1:2:4) including punning using 12mm size hard granite chips as direction of the Engineer-in-charge. |
| 47 | Supplying Fitting & fixing of M.S doors, windows,grill & grill gate including cost of all materials, cost of all labour,T&P required for the work etc. complete as per the direction of Engineer in Charge. |
| 48 | Painting two coats in all floors to new wood and iron work over a coat of primer including sand papering,polishing the surface,including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paint as per direction of the Engineer-in-charge. |
| 49 | Finishing walls with two coats of water proofing cement paint of approved shade including cost of cement paint, cost of all labour T&P required for the work etc. complete as per direction of Engineer In Charge. |
| 50 | Finishing wall surface of walls with Acrylic putty ( Water based) of approved make & finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes etc. Complete as per the direction of Engineer-in charge. |
| 51 | Reinforced Cement Concrete (1:2:4) with 12mm size hard granite chips having a minimum comprresive strength (in work test) 250 kg/Cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS 516 including hoisting etc. as direction of the Engineer-in-charge. |
| 52 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffling, polishing etc With cost, conveyance, taxes of all materials, labour, T&P etc.required for the Complete in all respect. |
| 53 | Rigid and smooth centering and shuttering for RCC works including false works and dismantling them after casting including cost of materials complete in ground floor as per the direction of Engineer in Charge. |
| 54 | RCC floor,Roof slab,landings,balconies,projecting sunshades and chajjas |
| 55 | RCC beams,columns,girders and bressmer |
| 56 | RCC Lintels |
| 57 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design & quality including cost of all door fittings & fixture etc.complete as per the direction of Engineer-in charge. |
| 58 | Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 151-154,151-155, as windows frame section No 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including lucking arrangement including all fitting including cost of materials all taxes , labour , T&P etc complete as per the direction of Engineer-in charge. |
| 59 | Supplying, fitting and fixing of 32mm thick PVC door shutter with approved quality of approved design & quality including cost of all door fittings & fixture etc.complete as per the direction of Engineer-in charge. |
| 60 | Brick masonary in cement mortar (1:6) using Flyash Bricks of size 25cmx12cmx8cm having crushing strength not lessthan 75 Kg/Cm2 in super structure after immersing the bricks for six hours in water before use in superstructure in all florrs with all necessary etc. as direction of the Engineer-in-charge. |
| 61 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying as directed by the Engineer-in-charge |
| 62 | Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire etc. as direction of the Engineer-in-charge. |
| 63 | 16mm(5/8\\") thick cement plaster (1:6)in finished smooth to inside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour etc. as direction of the Engineer-in-charge. |
| 64 | 12mm(1/2\\") thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour etc. as direction of the Engineer-in-charge. |
| 65 | Supplying Fitting & fixing of M.S doors, windows,grill & grill gate including cost of all materials, cost of all labour,T&P required for the work etc. complete as per the direction of Engineer in Charge. |
| 66 | Painting two coats in all floors to new wood and iron work over a coat of primer including sand papering,polishing the surface,including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paint as per direction of the Engineer-in-charge. |
| 67 | Finishing walls with two coats of water proofing cement paint of approved shade including cost of cement paint, cost of all labour T&P required for the work etc. complete as per direction of Engineer In Charge. |
| 68 | Rigid and smooth centering and shuttering for RCC works including false works and dismantling them after casting including cost of materials complete in ground floor as per the direction of Engineer in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender