Drinking Water Supply and Sanitation Government Departments Closing in 12 days TDR #58628382

Tender For Renovation And Extension Of Conference Hall, Kitchen, Outside Painting And Interior Work Of Delta I.B

Issued by Government Departments · Khordha, Odisha
Tender Value
41.29 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
41300
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Renovation And Extension Of Conference Hall, Kitchen, Outside Painting And Interior Work Of Delta I.B

BOQ

Name of Work:- Renovation and extension of Conference Hall, Kitchen, outside painting and interior work of Delta I.B
Sl. No. Item Description
1Dismantling brick or stone masonry in lime or cement mortar under any. height including stacking of useful materials for reuse and removing the debris from the work site with all leads, lifts and delifts with all cost of labour, T&P, taxes, cess etc. complete as per direction of Engineer-in-Charge.
2Dismentaling and removing RCC columns, beams, slabs, stair case, landing, lintels including stacking the same for reuse and removing the debris with all leads, lifts and delifts with all labour and T & P etc. complete as per direction of the Engineer-in-Charge.
3Dismentaling and removing doors, windows and ventilators including removal of frame, hinges, fastening and removing the debris with debris with all leads, lifts and delifts with all labour and T & P etc. complete as per direction of the Engineer-in-Charge.
4Earthwork in excavation of foundation in all kinds of soil with all leads, lifts & delifts including rough dressing and leveling the bed and depositing the excavated materials clear away from work site and dewatering including removing bushes, stumps and any other foreign materials from the working area as well as from the foundation trenches with cost of all labour, T&P, taxes, hire and running charges of all machineries, labour, welfare, cess etc. all complete as per the direction of Engineer-in-Charge.
5Filling foundation and plinth with sand well watered and rammed including cost of sand with all cost, carriage, royalty, taxes, cess of all materials, labour and T & P etc. all complete as per direction of the Engineer-in-Charge.
6Cement Concrete in (1:3:6) in foundation & plinth with using Cement of approved quality & 40mm down graded crusher broken hard granite chips with screened, washed & fined river sand with all cost, carriage, royalty & taxes, cess of all materials used including T&P & hoisting, laying the concrete in position and curing with water etc. all complete as per direction of the Engineer-in-Charge.
7Providing and laying cement concrete M-20 grade with 20 mm size and down graded crusher broken hard granite aggregates free from weathered skin and other deleterious materials of approved quality and uniform colour and texture and sharp sand of approved grading and quality conforming to the specifications with all leads, lifts, delifts and transportation by mechanical / manual means including cost, carriage, royalties and taxes,cess of all materials,labour including dewatering by suitable means, mixing concrete by concrete mixer and placing by manual / Mechanical means supplying T & P, curing for specified days by suitable means including compacting by vibrator etc. complete as per approved drawing and specifications etc. complete with all costs incidental to the work and as directed by the Engineer-in-Charge.(Ground Floor)
8Providing and laying cement concrete M-20 grade with 20 mm size and down graded crusher broken hard granite aggregates free from weathered skin and other deleterious materials of approved quality and uniform colour and texture and sharp sand of approved grading and quality conforming to the specifications with all leads, lifts, delifts and transportation by mechanical / manual means including cost, carriage, royalties and taxes,cess of all materials,labour including dewatering by suitable means, mixing concrete by concrete mixer and placing by manual / Mechanical means supplying T & P, curing for specified days by suitable means including compacting by vibrator etc. complete as per approved drawing and specifications etc. complete with all costs incidental to the work and as directed by the Engineer-in-Charge.(First Floor)
9Rigid & smooth centering, shuttering for RCC walls and fins including false work & dismantling them after specified days of casting including the cost, carriage of all materials, labour, T&P, taxes, cess, etc. complete in all respect as per direction of the Engineer-in-Charge. (Ground floor)
10Rigid & smooth centering, shuttering for cement concrete for RCC floor, roof slab, landing works including false work & dismantling them after specified days of casting including the cost, carriage of all materials, labour, T&P, taxes, cess, etc. complete in all respect as per direction of the Engineer-in-Charge.
11Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost. (Ground Floor)
12Providing, fixing and placing of Tor steel (HYSD) Fe-500(RINL/SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost. (First Floor)
13Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth, basement and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.
14Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge. (Ground Floor)
15Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge. (Superstructure)
1612mm thick Cement Plaster in cemet mortar (1:6) over brick work using sharp, fine and washed river sand of approved quality and specification including watering, curing, cost,carriage royality, cess, taxes of all materials with all labour, T & P and scafolding and staging charges etc all complete as per direction of the Engineer-in-Charge. (Ground Floor)
1712mm thick Cement Plaster in cemet mortar (1:6) over brick work using sharp, fine and washed river sand of approved quality and specification including watering, curing, cost,carriage royality, cess, taxes of all materials with all labour, T & P and scafolding and staging charges etc all complete as per direction of the Engineer-in-Charge. (First Floor)
1816mm thick Cement Plaster in cemet mortar (1:6) to RCC surface in all floors finished smooth including watering, curing, cost,carriage royality, cess, taxes of all materials with all labour, T & P and scafolding and staging charges etc all complete as per direction of the Engineer-in-Charge. (Ground Floor)
1916mm thick Cement Plaster in cemet mortar (1:6) to RCC surface in all floors finished smooth including watering, curing, cost,carriage royality, cess, taxes of all materials with all labour, T & P and scafolding and staging charges etc all complete as per direction of the Engineer-in-Charge. (First Floor)
20Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning closed deep chipping with slurry treatment and finished smooth to all R.C.C surface including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge. (Ground Floor)
21Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning closed deep chipping with slurry treatment and finished smooth to all R.C.C surface including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge. (First Floor)
22Supplying, fitting,and Fixing vertifed tile in floor of size 600mm X 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including rubbing and polishing complete in all respects and as per specification and direction of the Engineer-In-Charge. (Ground Floor)
23Supplying, fitting,and Fixing vertifed tile in floor of size 600mm X 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including rubbing and polishing complete in all respects and as per specification and direction of the Engineer-In-Charge. (First Floor)
24Supplying, fitting,and Fixing Granite tile in dados skirting & risors of steps on 12mm thickcement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete in all respects and as per specification and direction of the Engineer-In-Charge. (Ground Floor)
25Supplying, fitting,and Fixing Granite tile in dados skirting & risors of steps on 12mm thickcement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete in all respects and as per specification and direction of the Engineer-In-Charge. (First Floor)
26Supplying, fitting,and Fixing Ceramic floor tiles treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete in all respects and as per specification and direction of the Engineer-In-Charge. (Ground Floor)
27Supplying, fitting,and Fixing Ceramic floor tiles treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete in all respects and as per specification and direction of the Engineer-In-Charge. (First Floor)
28Supplying, fitting,and Fixing Ceramic wall tile ( tile 30cmx20cm & 20cmx20cm) in dados skirting & risors of steps on 12mm thickcement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete in all respects and as per specification and direction of the Engineer-In-Charge. (Ground Floor)
29Supplying, fitting,and Fixing Ceramic wall tile ( tile 30cmx20cm & 20cmx20cm) in dados skirting & risors of steps on 12mm thickcement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete in all respects and as per specification and direction of the Engineer-In-Charge. (First Floor)
30Providing and fixing factory made sing extruded WPC(Wood Polymer Composite) Frame size 60x125 mm solid door/windows/Ceasetory windows & other Frames/Chowkhat comprising or virgin PVC polymer of K value 58-60(suspension Grade), calcium carbonate and nature fibers(wood power/rice husk/wheat husk) and non toxic additives(Maximum toxicity index of 12 for 100gms)fabricated with miter joints after plying PVC solvent cement and crewed with full body threaded star headed SS screws having minimum frame density of 750Kg/cum, screw withdrawal strength of 2200 N (Face) & 11 N (Fdge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/mm2 and resistance to spread of frame Class A category with property of being termite/barer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in Charge(M.5 hold fast/lugs or SS dash fasteners shall be paid for separately).Note: for WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable variation of profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
3132mm thick Block board flush door shutter with both side 4mm thick veneer finishing with cost of all materials excluding floor spring etc. complete as per the direction of the Engineer-In-Charge.
32Supplying of M.S. Door, Window with grills, Grills, collapsible gates made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour T&P, carriage of materials to site etc. complete.
33Finishing wall surface of walls with cement based wall putty (water based) of approved make & finished smooth and even surface to receive painting including cost of scafolding, staging charges with cost, carriage, royalty, taxes, cess of all materials, labour and T & P etc. complete as per the direction of the Engineer-in-Charge. (Ground Floor)
34Finishing wall surface of walls with cement based wall putty (water based) of approved make & finished smooth and even surface to receive painting including cost of scafolding, staging charges with cost, carriage, royalty, taxes, cess of all materials, labour and T & P etc. complete as per the direction of the Engineer-in-Charge. (First Floor)
35Wall painting two coats with plastic emulsion paint of approved shade on old work including cost, carriage, taxes of all materials with cost of paint, labour, T&P etc. all complete as per direction of the Engineer-in-Charge. (Ground Floor)
36Wall painting two coats with plastic emulsion paint of approved shade on old work including cost, carriage, taxes of all materials with cost of paint, labour, T&P etc. all complete as per direction of the Engineer-in-Charge. (First Floor)
37Finishing wall with two coats good quality weather coat paint of approved shade on new work to give an even shade including cost of weather coat, carriage, taxes, cess of all materials and labour, T & P etc. complete as per direction of Engineer-in-Charge. (Ground Floor)
38Finishing wall with two coats good quality weather coat paint of approved shade on new work to give an even shade including cost of weather coat, carriage, taxes, cess of all materials and labour, T & P etc. complete as per direction of Engineer-in-Charge. (First Floor)
39Priming one coat with any approved primer for wall including all cost, carriage, taxes, cess of all materials with all labour & T&P etc. complete as per direction of the Engineer-in-Charge.
40Painting two coats with approved enamel paint on new work including cost, carriage, taxes, cess of all materials with cost of paint, labour, T&P, etc. all complete as per direction of the Engineer-in-Charge. (Ground Floor)
41Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm 0.90 mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T & P etc. all complete as per direction of the Engineer-in-Charge.
42Providing & fixing factory made UPVC white colour sliding glazed window two track two panels sliding window made of big series frame 67x50mm sash 46x62mm both having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension with cost, conveyance, taxes of all materials, labour, T & P etc. all complete as per direction of the Engineer-in-Charge.
4325mm thick grading concrete of proportion (1:2:2) using 6mm size crusher broken black hard granite chips, screened & washed sand including watering for curing tools & plants with all cost, carriage, taxes, cess, labour and T & P etc. all complete as per direction of the Engineer-in-Charge.
44Providing,fitting and fixing of false ceiling with gypsum board of size 6'-0\\" x 4'-0\\" with aluminum grid 2'-0\\" x 2'-0\\" suspended for ceiling with all cost, carriage, taxes, cess, labour and T & P etc. all complete as per direction of the Engineer-in-Charge.
45Supplying fitting and fixing of PVC door in toilates including cost of all materials, labour T&P, carriage of materials to site etc. complete as per direction of the Engineer-in-Charge.
46Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware Pedestal with wash hand basin of Hindware - Star white NEO make of size 55x40x80cm having CAT No. 11032(Pedestal) & CAT No. 10098 (Wash Basin) of approved make with Jaquar with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
47Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type Glass mirror of size 800mm x 600mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge.
48Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-CON-053KN or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
49Supplying all materials, labour, T&P and fixing Two way Bib cock of Jaquar Cat. No.- CON-041KN or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
50Supplying all materials, labour, T&P and fixing Health faucet of Jaquar Cat. No.-ALD 565 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
51Supplying all materials, labour, T&P and fixing standard sized CP Towel rail - 24\\" of Jaquar Cat. No.- ACN-1111SM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
52Supplying all materials, labour, T&P and fixing standard sized CP Towel ring of Jaquar Cat. No.-AKP 35721P or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
53Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.- ACN-1171N or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
54Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.- ACN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
55Supplying all materials, labour, T&P and fixing Toilet paper holder of Jaquar Cat. No.- ACN-1151N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
56Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge.
57Supplying all materials, labour, T&P and fixing SS Sink without Drain board Nirali Elegance Ultra or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
58Supplying all materials, labour, T&P and fixing standard sized 15mm dia Pillar cock of Jaquar Cat. No.-CON-011KN or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
59Supplying all materials, labour, T&P and fixing standard size Sink cock of Jaquar Cat. No.- CON-347KNM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
60Supplying & Fixing Long body Bib cock of CP brass of Jaquar continetnal cat no- CON-107KN equivalent including making good the damages including tools, plant, all material, labour, scaffolding etc. complete as per PH specification and direction of Engineering-in-charge.
61Supplying & Fixing Short body Bib cock of CP brass of Jaquar continetnal cat no- CON-047KN or equivalent including making good the damages including tools, plant, all material,labour , scaffolding etc. complete as per PH specification and direction of Engineering-in-charge.
62Supplying & Fixing Concealed stop cock of CP brass Jaquar cat no- CON-083FTK & ALD-083FT equivalent including making good the damages including tools, plant, all material,labour , scaffolding etc. complete as per PH specification and direction of Engineering-in-charge.
63Supplying all materials, labour, T&P and fixing Wall mixture of Jaquar Cat.No- CON-217KN or equivalent type of approved make etc complete including cutting the walls & making good the damages including cost of all materials as per specification and direction of the Engineer- in - Charge.
64Supplying all materials, labour, T&P and fixing 100mm dia. Over head shower of Jaquar Cat.No-OHS-1709 & SHA-477 or equivalent type of approved make etc complete including cutting the walls & making good the damages including cost of all materials as per specification and direction of the Engineer- in - Charge.
65Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes (selfit / ring fit type ) with all PVC fittings of Finolex /Prince/Supreme make as per IS 13592 to walls with nails, bobbins and wooden plugs or laying in trenches including all pipe fittings, jointing materials, tools plant, labour & all material, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer- in - Charge. (110 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 2.20 mm to 2.70 mm)
66Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes (selfit / ring fit type ) with all PVC fittings of Finolex /Prince/Supreme make as per IS 13592 to walls with nails, bobbins and wooden plugs or laying in trenches including all pipe fittings, jointing materials, tools plant, labour & all material, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer- in - Charge. 90 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 1.8 mm to 2.20 mm )
67Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of AJAY/ ASHIRVAD/ ASTRAL / SUPREME / ORI-PLAST ETC) confirming to ASTM F442 Specific-2 having thermal stability for hot & cold water supply SDR 11 , including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (20 mm nominal outer dia Pipes)
68Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of AJAY/ ASHIRVAD/ ASTRAL / SUPREME / ORI-PLAST ETC) confirming to ASTM F442 Specific-2 having thermal stability for hot & cold water supply SDR 11 , including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (25 mm nominal outer dia Pipes)
69Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of AJAY/ ASHIRVAD/ ASTRAL / SUPREME / ORI-PLAST ETC) confirming to ASTM F442 Specific-2 having thermal stability for hot & cold water supply SDR 11 , including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (40 mm nominal outer dia Pipes)
70Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of AJAY/ ASHIRVAD/ ASTRAL / SUPREME / ORI-PLAST ETC) confirming to ASTM F442 Specific-2 having thermal stability for hot & cold water supply SDR 11 , including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (50 mm nominal outer dia Pipes)
71Providing and fixing gunmetal fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding, making good the damages caused, complete in all respects as per direction of Engineer in Charge. (25mm dia)
72Providing and fixing gunmetal fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding, making good the damages caused, complete in all respects as per direction of Engineer in Charge. (32mm dia)
73Providing and fixing gunmetal fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding, making good the damages caused, complete in all respects as per direction of Engineer in Charge. (40mm dia)
74Providing and fixing gunmetal fullway valve of approved make and quality with all materials, labour, tools, plant, scafolding, making good the damages caused, complete in all respects as per direction of Engineer in Charge. (50mm dia)
75Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. (110mm dia Single Junction with door)
76Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. (100mm dia Double Junction with door)
77Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. (110mm dia Cowl)
78Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. (110mm dia Plain Bend)
79Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. (110mm dia SWR Door Bend)
80Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. (100mm dia End Plug)
81Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. (110mm dia Pipe clip)
82Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. (75mm dia Plain Bend) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58628382
AUTHORITY Government Departments
TENDER VALUE 41.29 Lakhs
LAST DATE 04-12-2026
Authority
Authority Name Water Resources Department
Work Description Tender for Renovation And Extension Of Conference Hall, Kitchen, Outside Painting And Interior Work Of Delta I.B
Basic Detail
Tender No SEPRD17/2026-27
Bidding Type Tender
Location
City Khordha
State Odisha
Key Dates
Publish Date 20 Nov 2026
Submission Date 04 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 41.29 Lakhs
Tender Fee 6000
EMD 41300
Exemption Available
Document List
96b4ac2b-6a43-4d0b-9e11-a81daf839b3a.html
BOQ_622468.xls
DTCN1725.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

96b4ac2b-6a43-4d0b-9e11-a81daf839b3a.html

xls

BOQ_622468.xls

pdf

DTCN1725.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender