Tender For Renovation Of Amti Jheel In Mc Hansi
Tender Value
4.05 Crore
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
8.10 Lakhs
Bank guarantee accepted
Document Fee
15000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation Of Amti Jheel In Mc Hansi
BOQ
| Sl. No. | Item Description |
| 1 | Supply and erection of 65 Amp. 3 Phase automatic/ digital time switch of Indo Asian Make HSN code 8537 along with contactor of required capacity of Indo Asian Make movement controlled by precisaty quartz oscillation operation on main supply of continue to run on built in rechargeable nickle cadium call for 150 hours in the event of power failure including cost of all petty items complete in all respect upto the entire satisfaction of Engineer in charge of work. |
| 2 | Double Cross Walder Double Cross Trainer B- Class G/I Pipe to Used of different Nominal Bore Different |
| 3 | Providing and fixing of Panchivihar with all material and accessories and steel of 16,12,10,8mm with ISI Mark 550 Gred including river sand, Aggregate of 18/20mm complete in all respect upto the entire satisfaction of engineer in- charge |
| 4 | Providing and fixing of UV Print with 3mm clear Acrylic sheet of size with SS 304 Spacer as per drawing complete in all respect as per the direction of engineer-in charge |
| 5 | Providing and Fixing of Decorative pole of 5mtr high made of galvanised Mild steel pipes fitted with cast aluminium embellishments duly polyurethane paint coated with cast aluminium base cover. Pole Bottom Dia- 139.7x3.6mm (1 mtr), Top Dia -_ 76.1x3.2mm (2.5 mtr) Base Plate Size is 250x250x12mm Foundation Bolt 16x600x4 Nos. with Single Arm Bracket MF-82A height will be 1.5 Mtr. Long with Suitable pipes and Bracket will be completed with Aluminium Castings as per approved design and LED decorative drop down light 50w made of aluminium housing fitted with PMMA diffuser, Light Dimensions is 500x370 (With-Philips/Fulhame/HR Driver and10KVA SPD)complete in all respect as per the direction of the officer-in-charge. |
| 6 | Providing and Fixing of Maharaj Pritviraj Chauhan statue in FRP material of 10` height with transportation complete in all respect as per the direction of the officer-in-charge. |
| 7 | Providing and fixing of SBR Rubber Tiles of size 20`x20` with 25mm thick grey in colour of `Amazon Flooring` complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. |
| 8 | Providing and fixing of ABS Tactile tile of 25mmm thick of size 300x300mm in yellow colour complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. |
| 9 | Providing and fixing of Stone chatra of size 23x7x6 as per design complete in all respect as per the direction of engineer in charge . |
| 10 | Recovery of Brick work |
| 11 | Recovery of ILPB Blocks |
| 12 | Recovery of MS RAILING |
| 13 | Providing and fixing of spring rocker complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. |
| 14 | Providing and fixing of spring see-saw complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. |
| 15 | Providing and fixing of chair swing complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. |
| 16 | Providing and fixing of straight slide complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. |
| 17 | Providing and fixing of double see-saw complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. |
| 18 | Providing and fixing of Shoulder and Chest Press Combo made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.The handle frame is made of 42mm OD G.I. pipe.The remaining frame is made of 32mm OD G.I. pipe. Seating frame support of dimension 250 x 150 x 5mm is welded for supporting the pedal seat. MS Seat of size 380mm x 300mm x 5mm is used for supporting the foot. ?? 60mm seamless pipe bushes. Permanent lubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia ??225mm and 10mm thickness is welded at bottom. |
| 19 | providing and fixing of Foreman Ring Dual or Parallel Bar made up of 2inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The powder coating done with Pure polyester powder with 60 to 70 micron thickness.- |
| 20 | Providing and fixing of Swing Dual/ Surf Board equipment made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.60mm seamless pipe bushes.Permanent lubricated Ball bearings 6205zz/6205-2rs.Foundation plate of dia 225mm and 10 mm thickness is welded at bottom.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm.Allen Bolts are also used to tighten the closing cap.Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness - |
| 21 | Providing and fixing of PUBLIC TOILET in Acrylic Letters with light of 24` Height with power Supply and Warrenty of 2 years with fittings complete with all respect. (Acrylic Make: Astari, Marga cipta, Acast),...( Make: Hilight, Osram , GOQ)....( Make: Timex, Alutech , Aluceor) |
| 22 | Providing and fixing of floor vinyl strickring 3m pasting on floor complete in allrespect as per the entire satisfaction of engineer in-charge ..(Make: Shiv Arts ,Floor Rex,Asian Flooring) |
| 23 | Providing and fixing of signages of toilet of size 300x450mm as per design complete in all respect up to the entire satisfaction of Engineer-in-charge of the work.. (Make: Patel Brothers , JMJ Signage , Vizan Sign) |
| 24 | Supply, installation, testing, and commissioning of floor-mounted water cooler unit of capacity [insert capacity, e.g., 40/80 Ltrs/hr), made of stainless steel body, with in-built storage tank, cooling compressor, and automatic thermostat control. Unit shall be suitable for operation on 230V, 50Hz, single phase AC supply, complete with all necessary internal piping, electrical connections, and drain arrangements. Shall include inlet connection, overflow connection, drainage pipe, and all accessories as per manufacturer`s standard.All materials and workmanship to be as per approved specifications and standards.Make: [insert preferred makes or `Approved Equivalent`]. |
| 25 | Renovation of Amti Jheel in Mc Hansi Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender