Public Administrative Department Local Bodies Closing in 6 days TDR #58626627

Tender For Supply Of School Benches For Primary Nmmc School No.93, At Sector-50, Nerul, Navi Mumbai.

Issued by Local Bodies · Thane, Maharashtra
Tender Value
24.63 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
50000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Supply Of School Benches For Primary Nmmc School No.93, At Sector-50, Nerul, Navi Mumbai. , Dual Seater Desk And Bench (Primary Section) : Metal Frame / Body Construction Details :Metal Frame Tube Made Of Combination Of 30 X 15Mm Crs Oval Tube Steel Components And 40 X 20Mm Crs Oval Tube Components. Base Frame Structure Made Of 40 X 20Mm Tube Dimensions 390 D X 450Mmw And Having At Least 9 Adjustment Of The Height Which Can Achieve Minimum Height Of The Desk 550Mm To Maximum Height Up To 800Mm With 30Mm Flexibility Steps Slots 9 Slots. The Overall Side Frame Should Be Completely Welded And Outer Length Of The Base Structure Frame Should Be Of 950Mm. The Welding Process Should Be Of Co2 Mig Welding Process Only For Better Strength, Durability And Quality. The Inner Adjustable Height Elements Are Made Of 15 X 30Mm Oval Tube. The Top Inner Frame Structure Should Be Connected With Metal Cross Frame Which Should Be Completely Welded. At The Junction Of Adjustable Tubes There Should Be Pvc Bush Similar To Base Tube Shape For Better Flexibility And Stability While Adjusting The Height Of The Desk. All The Open Face Of The Tube Should Well Covered With Pvc Cover Which Should Cover The Tube Form Outer Side Not Inner Side And It Should Be Also Rivetted With Tube. The Frame Should Have Provision For Hanging Of Water Bottle And Bags Arrangements And The Strength Should Be Enough To Handle The Weight Of The Bags And Water Bottles, Advisable To Have At Least 2 To 3Mm Mild Steel Hook Of At Least 25Mm Wide. Desk Storage Shelf Details :Desk Storage Made Of Combination Of 5Mm And 3Mm Wire Mesh, The Base Wire Mesh Should Be Of 100Mm To 120 Mm Height To Keep Books And Bags. The Storage Shelf Should Be Processed Under Resistance Spot Wielding At Each Junction And Contact Of Wire. The Welding Should Have Enough Strength To Hold At Least 50Kg Pull Load - Which Should Be Measure By Quality Control Team. The Bottom Storage Shelf Should Be Made Of Perforate 1.2Mm Thickness Sheet With At Least 6Mm To 8Mm Perforation Across Entire Sheet. The Mounting Of The Storage Should Be With Wooden Desk Panel From The Bottom Side Base And The Mounting Brackets Should Be Of At Least 2Mm And 25Mm Wide For Better Strength. There Should Be At Least 4 Nos Of Brackets And The Mounting With Desk Panel Bottom Side Should Be With M6 Allen Flat Head Bolt And M6 Wood Metal Insert Only For Better Strength. All Metal Element Finishing Process - All The Metal Elements Should Be Followed Strict Surface Treatment Guidelines By 7 To 9 Tank Alkaline Water Treatment And Base Frame Colour Should Be 7016 Ral Colour Or Matching To The Same. During The Powder Coating Process, The Baking Temperature Should Reach From The 180 To 200Degree And For Minimum 15 To 20 Minutes For Better Strength And Surface Bonding. Wooden Desk Top Panel :Wooden Desk Top Panel Made Of 18Mm Solid Rubber Wood Panels Having 1000 X 400 X 18Mm / 17Mm Dimensions; All The Corners Should Have At Least 50Mm Round Corner Profile Cutting And The Edges Should Have 5 O 10Mm Round Profiling The 100 % Safety. The Panels Should Be Sanded Well Before Clear Semi-Gloss Lacquering Process The Lacquer Should Be Nc Based. Chair Specification And Details :Metal Frame Structure - Metal Frame Tube Made Of Combination Of 30 X 15Mm Crs Oval Tube Steel Components And 40 X 20Mm Crs Oval Tube Components. Base Frame Structure Made Of 40 X 20Mm Tube Dimensions 415 X 145 And Having At Least 6 Adjustments Of The Height Which Can Achieve Minimum Height Of The Desk 350Mm To Maximum Height Up To 470 Mm With 25Mm Flexibility Steps Slots 6 Slots. The Base Frame Of The Chair Should Be Completely Welded With Cross 40 X 20Mm Oval Tube. Insert Structure Should Achieve The Seating And Back Rest Angle Of 100 To 105 Degre (10 To 15 Degree Seating Inclination). The Specification Of The Chair Shell Should Be As Follows : Chair Back Specifications - Overall Dimensions - Height 251 +/- 5Mm, Length - 415Mm +/- 5Mm, Width Max- 109Mm +/- 2Mm, Applicable For 15 X 35Mm Tube Insert Provision, Frame Insert Id Depth Should Be Of At Least 100Mm The Initial Raw Material Should Be Of Hdpe With Rough Textures Finished. Chair Seat Specifications - Breadth - 386Mm +/-5Mm, Length Of The Seat 390Mm +/-5Mm, Width Max - 53Mm +/- - 2Mm, The Base Material Of The Seat Should Be Of Hdpe With Rough Textured Finished. At The Junction Of Adjustable Tubes There Should Be Pvc Bush Similar To Base Tube Shape For Better Flexibility And Stability While Adjusting The Height Of The Chair. All The Open Face Of The Tube Should Well Cover With Pvc Cover Which Should Cover The Tube Form Outer Side Not Inner Side, And It Should Be Also Rivetted With Tube. All Metal Element Finishing Process - All The Metal Elements Of The Chairs Should Be Followed Strict Surface Treatment Guidelines By 7 To 9 Tank Alkaline Water Treatment And Base Frame Colour Should Be 7016 Ral Colour Or Matching To The Same. During The Powder Coating Process, The Baking Temperature Should Reach From The 180 To 200Degree And For Minimum 15 To 20 Minutes For Better Strength And Surface Bonding. 0.0

BOQ

Name of Work:- Supply of School Benches for Primary NMMC School No.93, at Sector-50, Nerul, Navi Mumbai.
Sl. No. Item Description
1Dual Seater Desk and Bench (Primary Section) :Metal frame / Body construction details :Metal frame tube made of combination of 30 x 15mm CRS Oval tube steel components and 40 x 20mm CRS Oval tube components. Base frame structure made of 40 x 20mm Tube dimensions 390 D x 450mmW and having at least 9 adjustment of the height which can achieve minimum Height of the desk 550mm to maximum height up to 800mm with 30mm flexibility steps slots 9 slots. The Overall side frame should be completely welded and outer length of the base structure frame should be of 950mm. The welding process should be of CO2 MIG welding process only for better strength, Durability and quality. The Inner adjustable height elements are made of 15 x 30mm Oval tube. The Top inner frame structure should be connected with metal cross frame which should be completely welded. At the junction of Adjustable tubes there should be PVC bush similar to base tube shape for better flexibility and stability while adjusting the height of the desk. All the open face of the tube should well covered with PVC cover which should cover the tube form outer side not inner side and it should be also rivetted with tube. The frame should have provision for hanging of Water bottle and bags arrangements and the strength should be enough to handle the weight of the bags and water bottles, Advisable to have at least 2 to 3mm mild steel hook of at least 25mm wide.Desk storage shelf details :Desk storage made of combination of 5mm and 3mm Wire mesh, The base wire mesh should be of 100mm to 120 mm Height to keep books and bags. The storage shelf should be processed under resistance spot wielding at each junction and contact of wire. The welding should have enough strength to hold at least 50KG pull load – which should be measure by Quality control team. The bottom storage shelf should be made of Perforate 1.2mm thickness sheet with at least 6mm to 8mm perforation across entire sheet. The mounting of the Storage should be with wooden desk panel from the bottom side base and the mounting brackets should be of at least 2mm and 25mm wide for better strength. There should be at least 4 Nos of brackets and the mounting with desk panel bottom side should be with M6 Allen Flat head bolt and M6 Wood metal insert only for better strength. All Metal Element finishing process – All the Metal elements should be followed strict surface treatment guidelines by 7 to 9 tank Alkaline water treatment and base frame colour should be 7016 RAL colour or Matching to the same. During the powder coating process, the baking temperature should reach from the 180 to 200Degree and for minimum 15 to 20 Minutes for better strength and surface bonding.Wooden Desk Top Panel :Wooden desk top panel made of 18mm solid Rubber Wood panels having 1000 x 400 x 18mm / 17mm dimensions; All the corners should have at least 50mm Round corner profile cutting and the edges should have 5 o 10mm round profiling the 100 % Safety. The panels should be sanded well before Clear semi-gloss lacquering process the Lacquer should be NC based.Chair Specification and details :Metal Frame structure - Metal frame tube made of combination of 30 x 15mm CRS Oval tube steel components and 40 x 20mm CRS Oval tube components. Base frame structure made of 40 x 20mm Tube dimensions 415 x 145 and having at least 6 adjustments of the height which can achieve minimum Height of the desk 350mm to maximum height up to 470 mm with 25mm flexibility steps slots 6 slots. The Base frame of the chair should be completely welded with cross 40 x 20mm Oval tube. Insert structure should achieve the seating and back rest angle of 100 to 105 Degre (10 to 15 Degree seating inclination).The specification of the Chair Shell should be As follows :Chair Back Specifications – Overall Dimensions – Height 251 +/- 5mm, Length – 415mm +/- 5mm, Width Max- 109mm +/- 2mm, Applicable for 15 x 35mm Tube insert provision, Frame insert ID Depth should be of at least 100mm the initial Raw material should be of HDPE with Rough textures finished.Chair Seat Specifications – Breadth – 386mm +/-5mm, Length of the Seat 390mm +/-5mm, Width max – 53mm +/- - 2mm, the base material of the seat should be of HDPE with rough textured finished.At the junction of Adjustable tubes there should be PVC bush similar to base tube shape for better flexibility and stability while adjusting the height of the chair.All the open face of the tube should well cover with PVC cover which should cover the tube form outer side not inner side, and it should be also rivetted with tube.All Metal Element finishing process – All the Metal elements of the Chairs should be followed strict surface treatment guidelines by 7 to 9 tank Alkaline water treatment and base frame colour should be 7016 RAL colour or Matching to the same. During the powder coating process, the baking temperature should reach from the 180 to 200Degree and for minimum 15 to 20 Minutes for better strength and surface bonding. 0.0 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58626627
AUTHORITY Local Bodies
TENDER VALUE 24.63 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Navi Mumbai Municipal Corporation
Work Description Tender for Supply Of School Benches For Primary Nmmc School No.93, At Sector-50, Nerul, Navi Mumbai. , Dual Seater Desk And Bench (Primary Section) : Metal Frame / Body Construction Details :Metal Frame Tube Made Of Combination Of 30 X 15Mm Crs Oval Tube Steel Components And 40 X 20Mm Crs Oval Tube Components. Base Frame Structure Made Of 40 X 20Mm Tube Dimensions 390 D X 450Mmw And Having At Least 9 Adjustment Of The Height Which Can Achieve Minimum Height Of The Desk 550Mm To Maximum Height Up To 800Mm With 30Mm Flexibility Steps Slots 9 Slots. The Overall Side Frame Should Be Completely Welded And Outer Length Of The Base Structure Frame Should Be Of 950Mm. The Welding Process Should Be Of Co2 Mig Welding Process Only For Better Strength, Durability And Quality. The Inner Adjustable Height Elements Are Made Of 15 X 30Mm Oval Tube. The Top Inner Frame Structure Should Be Connected With Metal Cross Frame Which Should Be Completely Welded. At The Junction Of Adjustable Tubes There Should Be Pvc Bush Similar To Base Tube Shape For Better Flexibility And Stability While Adjusting The Height Of The Desk. All The Open Face Of The Tube Should Well Covered With Pvc Cover Which Should Cover The Tube Form Outer Side Not Inner Side And It Should Be Also Rivetted With Tube. The Frame Should Have Provision For Hanging Of Water Bottle And Bags Arrangements And The Strength Should Be Enough To Handle The Weight Of The Bags And Water Bottles, Advisable To Have At Least 2 To 3Mm Mild Steel Hook Of At Least 25Mm Wide. Desk Storage Shelf Details :Desk Storage Made Of Combination Of 5Mm And 3Mm Wire Mesh, The Base Wire Mesh Should Be Of 100Mm To 120 Mm Height To Keep Books And Bags. The Storage Shelf Should Be Processed Under Resistance Spot Wielding At Each Junction And Contact Of Wire. The Welding Should Have Enough Strength To Hold At Least 50Kg Pull Load - Which Should Be Measure By Quality Control Team. The Bottom Storage Shelf Should Be Made Of Perforate 1.2Mm Thickness Sheet With At Least 6Mm To 8Mm Perforation Across Entire Sheet. The Mounting Of The Storage Should Be With Wooden Desk Panel From The Bottom Side Base And The Mounting Brackets Should Be Of At Least 2Mm And 25Mm Wide For Better Strength. There Should Be At Least 4 Nos Of Brackets And The Mounting With Desk Panel Bottom Side Should Be With M6 Allen Flat Head Bolt And M6 Wood Metal Insert Only For Better Strength. All Metal Element Finishing Process - All The Metal Elements Should Be Followed Strict Surface Treatment Guidelines By 7 To 9 Tank Alkaline Water Treatment And Base Frame Colour Should Be 7016 Ral Colour Or Matching To The Same. During The Powder Coating Process, The Baking Temperature Should Reach From The 180 To 200Degree And For Minimum 15 To 20 Minutes For Better Strength And Surface Bonding. Wooden Desk Top Panel :Wooden Desk Top Panel Made Of 18Mm Solid Rubber Wood Panels Having 1000 X 400 X 18Mm / 17Mm Dimensions; All The Corners Should Have At Least 50Mm Round Corner Profile Cutting And The Edges Should Have 5 O 10Mm Round Profiling The 100 % Safety. The Panels Should Be Sanded Well Before Clear Semi-Gloss Lacquering Process The Lacquer Should Be Nc Based. Chair Specification And Details :Metal Frame Structure - Metal Frame Tube Made Of Combination Of 30 X 15Mm Crs Oval Tube Steel Components And 40 X 20Mm Crs Oval Tube Components. Base Frame Structure Made Of 40 X 20Mm Tube Dimensions 415 X 145 And Having At Least 6 Adjustments Of The Height Which Can Achieve Minimum Height Of The Desk 350Mm To Maximum Height Up To 470 Mm With 25Mm Flexibility Steps Slots 6 Slots. The Base Frame Of The Chair Should Be Completely Welded With Cross 40 X 20Mm Oval Tube. Insert Structure Should Achieve The Seating And Back Rest Angle Of 100 To 105 Degre (10 To 15 Degree Seating Inclination). The Specification Of The Chair Shell Should Be As Follows : Chair Back Specifications - Overall Dimensions - Height 251 +/- 5Mm, Length - 415Mm +/- 5Mm, Width Max- 109Mm +/- 2Mm, Applicable For 15 X 35Mm Tube Insert Provision, Frame Insert Id Depth Should Be Of At Least 100Mm The Initial Raw Material Should Be Of Hdpe With Rough Textures Finished. Chair Seat Specifications - Breadth - 386Mm +/-5Mm, Length Of The Seat 390Mm +/-5Mm, Width Max - 53Mm +/- - 2Mm, The Base Material Of The Seat Should Be Of Hdpe With Rough Textured Finished. At The Junction Of Adjustable Tubes There Should Be Pvc Bush Similar To Base Tube Shape For Better Flexibility And Stability While Adjusting The Height Of The Chair. All The Open Face Of The Tube Should Well Cover With Pvc Cover Which Should Cover The Tube Form Outer Side Not Inner Side, And It Should Be Also Rivetted With Tube. All Metal Element Finishing Process - All The Metal Elements Of The Chairs Should Be Followed Strict Surface Treatment Guidelines By 7 To 9 Tank Alkaline Water Treatment And Base Frame Colour Should Be 7016 Ral Colour Or Matching To The Same. During The Powder Coating Process, The Baking Temperature Should Reach From The 180 To 200Degree And For Minimum 15 To 20 Minutes For Better Strength And Surface Bonding. 0.0
Basic Detail
Tender No NMMC/STORE/04/2026-2027
Bidding Type Tender
Location
City Thane
State Maharashtra
Key Dates
Publish Date 20 Nov 2026
Submission Date 27 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value 24.63 Lakhs
Tender Fee 3540
EMD 50000
Exemption Not Available
Document List
19a17615-5342-4612-b90d-209be11dd8de.html
BOQ_2314212.xls
Tendercopy.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

19a17615-5342-4612-b90d-209be11dd8de.html

xls

BOQ_2314212.xls

pdf

Tendercopy.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender