Drinking Water Supply and Sanitation Local Bodies Closing in 16 days TDR #58625475

Tender For Providing Electrical Installation For 800 Kva Ht Connection At Kovilvazhi Corporation Land In Ward No 60.Estimate Amount : Rs.93.50 Lakhs

Issued by Local Bodies · Tiruppur, Tamil Nadu
Tender Value
93.50 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
1.87 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Electrical Installation For 800 Kva Ht Connection At Kovilvazhi Corporation Land In Ward No 60.Estimate Amount : Rs.93.50 Lakhs

BOQ

Name of Work:- Providing Electrical Installation for 800 KVA HT Connection at Kovilvazhi Corporation Land in Ward No 60.Estimate Amount : Rs.93.50 Lakhs
Sl. No. Item Description
1PART- A : POINT OF SUPPLY
211KV SINGLE VCB PANEL(OUTDOOR)Erection, Testing and Commissioning of outdoor type 11KV 800A 25KA Single panel VCB with necessary fixing accessories, protective devices and metering with PT & CT and as per the technical specification as per TANGEDCO requirements.
3Supply and laying of 3C x 300 Sqmm 11KV grade XLPE HT cable
4Supply & End Termination of Indoor type heat shrinkable termination kit suitable for 11 KV 3 Core 185 Sq.mm XLPE cable complete with all materials, tarpaulin covering for armoured aluminium cable jointing etc., - Raychem make.
5Supply & End Termination of Outdoor type heat shrinkable termination kit suitable for 11 KV 3 Core 185 Sq.mm XLPE cable complete with all materials, tarpaulin covering for armoured aluminium cable jointing etc., - Raychem make
6PART – B : TRANSFORMER
7Erection, Testing and commissioning of 11KV / 433 800KVA outdoor type transformer complete with first fill of Oil automatic OLTC control gear, RTCC panel with local and remote control panel, all components and accessories as per technical specification TECHNICAL SPECIFICATION OF POWER TRANSFORMER:Rating : 800 KVA, Service : Outdoor.Rated Frequency : 50 Hz No. of Phases : 3,Rated Voltage : 433 Volts, HV Winding : 11 KV, LV Winding : 433 Volts, Winding connection, HV Winding : Delta LV Winding (Neutral brought Out separately for earthing) : Star. HV side : Bushing, LV side : Cable Box, Vector group : Dyn 11. Type of cooling : ONAN, Type : On load. Range : + 10% to – 15% Steps : In steps of 2%. Winding Conductor material : Copper,(including labour amount)
8Supply & Erection of Neutral CT box made out off 16Gauge CR Sheet with powder coating paint using 1 No 300/5A, CL: 5P10 Accuracy Tape Insulated CT with necessary hardware's etc.(including labour amount)
9Supply & Erection of Neutral arrangement with DMC Support for 800KVA Transformer(including labour amount)
10Supply and Erection of HT Meter Box with all accessories including connecting Cables (including labour amount)
11PART - C : ELECTRICAL PANELS
12M.V. PANEL -1 :A. BUS BAR : Double bus bar arrangement.i. MAIN BUS BAR :Aluminum bus bar rated for 1250 ABUS BAR SIZE :1Runs x 100mm x 12mm Al. flat/Phase .1Runs x 100mm x 6mm Al. flat / neutral.INCOMING : FOR EB SUPPLY.1 No. Air circuit breaker Manually Operated draw out type 4P, 433V 1250A 4P ACB 35 MVA for 1 Second each filled with the following meant for EB supply.a. 1 No. – Manual trip push button.b. 1 No. - Mechanical ON/OFF indicator.c. 1 No. – UV Coil device suitable for 415V ACd. 1 Set – 8 NO / 8NC Aux. Contacts.e. 5 Nos. – LED type indicating lamps for RYB Indication and ACB ON/OFF indication 230V AC. 1 No LED lamp with reset Button for UVf. 1 Set. of CT’s suitable for metering.g. 1 Set. of CT’s suitable for protectionh. 1 No. Earth fault relay .CDG11i. 1 No. Flush type digital 96sq mm size Multiparameter meter with RS 485 port for computer interfacing.( EM6400 or equivalent )j. 1 No. VCF D2 Relay for over voltage and under voltage cut off.k. 1 No. Maximum demand controller.l. Lot – Sufficient control MCB's for the system.m. 1 No. Mechanical inter lock arrangementEarthing : 25mm x 3mm Al. FlatGEN INCOMING :1800A 4P FSU with fuse links - 1 NoOUTGOINGS :630A 4P FSU with fuse links inter connected to main Busbar with suitable size of AL flat. - 4 Nos400A 4P FSU with fuse links inter connected to main Busbar with suitable size of AL flat. - 2 Nos250A 4P FSU with fuse links inter connected to main Busbar with suitable size of AL flat. - 2 NosAll outgoing feeders will be provided with 1 No. Flush type digital 96sq mm size Multiparameter (V/A/Hz/KW/KWH/PF) meter with RS 485 port for computer interfacing ( EM6400 or equivalent ). except capacitor feeders – necessary CT’s and control MCB's etc - (No. of feeders–8Nos)Capacitors Feeder will be provided with 1 No. Digital 96 Sqmm Ammeter with inbuilt Selector Switch necessary CT’s and control MCB's etc.,. - ( No. of feeders – 2 Nos )Paint: Powder coating process.Earthing : 25mm x 6mm Al. Flat(including labour amount)
13LIGHTING SWITCH BOARD :INCOMING : 1250 A TPN FSU with fuse links - 1 No.OUTGOING :63A TPN FSU/MCB with fuse links and inter connected to main bus bar system with suitable size of Cu..flat - 6 Nos.25mm x 3mm Al. flat 1 Run/ Neutral.EARTHING : 25mm x 3mm Cu.flatPaint: Powder Coating Process.(including labour amount)
14MCB DB - 1INCOMING :125A 4P ELMCCB + MCCB - 1 No.OUTGOING :32A TP MCB - 12 Nos.Paint: Powder Coating Process. (including labour amount)
15LIGHTING SUB SWITCH BOARD - 1INCOMING :63A TPN MCB - 1 No.OUTGOING :32A DP MCB - 6 Nos.DB 4 way - 1 No (including labour amount)
16LIGHTING DISTRIBUTION BOARD - 1INCOMING :32A DP RCBO (30mA) - 1 No.OUTGOING :6A SP MCB - 8 Nos.DPN DB 12 way - 1 No. (including labour amount)
17APFC BOARD - ( 100 KVAR )INCOMER400A, TP+N, MCCB With Rotary Handle Mechanism - 1 No.63A TP MCB - 8 Nos.2 KVAR CAPACITOR FEEDER - 1 NoEach 2 KVAR Capacitor feeder will have 1 No 2 KVAR Capacitor duty contactor, 2 Nos push button for ON/OFF, 1 No LED indication lamp for ON and 1 No 2 KVAR Capacitor with Necessary Power/Control wire, wiring accessories and its hardware's etc.3 KVAR CAPACITOR FEEDER - 1 No.Each 3 KVAR Capacitor feeder will have 1 No 3 KVAR Capacitor duty contactor, 2 Nos push button for ON/OFF, 1 No LED indication lamp for ON and 1 No 3 KVAR Capacitor with Necessary Power/Control wire, wiring accessories and its hardware's etc.5 KVAR CAPACITOR FEEDER -1 No.Each 5 KVAR ELECTROLYTIC POWER Capacitor feeder will have 1 No 5 KVAR Capacitor duty contactor, 2 Nos push button for ON/OFF, 1 No LED indication lamp for ON and 1 No 5 KVAR Capacitor with Necessary Power/Control wire, wiring accessories and its hardware's etc.10 KVAR CAPACITOR FEEDER - 1 Nos.Each 10 KVAR ELECTROLYTIC POWER Capacitor feeder will have 1 No 10 KVAR Capacitor duty contactor, 2 Nos push button for ON/OFF, 1 No LED indication lamp for ON and 1 No 10 KVAR Capacitor with Necessary Power/Control wire, wiring accessories and its hardware's etc.15 KVAR CAPACITOR FEEDER - 2 Nos.Each 15 KVAR ELECTROLYTIC POWER Capacitor feeder will have 1 No 15 KVAR Capacitor duty contactor, 2 Nos push button for ON/OFF, 1 No LED indication lamp for ON and 1 No 15 KVAR Capacitor with Necessary Power/Control wire, wiringaccessories and its hardware's etc. 25 KVAR CAPACITOR FEEDER - 2 No.Each 25 KVAR ELECTROLYTIC POWER Capacitor feeder will have 1 No 25 KVAR Capacitor duty contactor, 2 Nos push button for ON/OFF, 1 No LED indication lamp for ON and 1 No 25KVAR Capacitor with Necessary Power/Control wire, wiring accessories and its hardware's etc.METERINGIncoming metering:-Incoming metering will have 1 No digital type 96sq.mm 1No Ammeter with in built selector switch, 1 No 6 Stage APFC Relay ,1No Auto/Manual Selector switch , .RYB indication lamps necessary CT’s and control MCB's etc,. - 1 SetBUS BAR SIZE :50mm x 6mm Cu . flat 1 Run /Phase .EARTHING : 25mm x 3mm Cu. FlatPaint: Powder coating process, (including labour amount)
18Supply and Erection of 250 KVAR ELECTROLYTIC POWER Capacitor Bank (10x 25 KVAR ) with all accessories (including labour amount)
19PART – D : EARTHING COPPER : Supply & Laying of copper the following sizes of earth wires, Rate shall be inclusive of 25 ´ 3mm GI spacer clamp for main earth flat, suitable clamping with MS flats for earth wires, etc., including terminal crimping type sockets, bolt nuts and washers etc., required to complete the work.
2025 x 1.5 / 3mm Copper Flat(including labour amount)
218 Gauge Cu. Wire (including labour amount)
2210 Gauge Cu. Wire (including labour amount)
2340 x 6mm Copper Flat (including labour amount)
241.5/2.5/4 SQMM Earth wire (including labour amount)
25Supply & Erection of earth electrode using 2 Mtr.length 100mm CI Pipe generally as recommended by IS code using charcoal and clay as required excluding excavation and mationary work. (including labour amount)
26Supply & Erection of 25 x 3 mm Cu. Earth Clamp. (including labour amount)
27Bus Duct with Canopy and Flex Joint (including labour amount)
28PART – E : L.T. CABLES : Supply and Laying of 1.1 KV grade PVC insulated XLPE sheathed armoured Al. Conductor cables confirming to IS: 7098 Part I 1988 of following sizes as per technical specification.
293 ½ C x 400 Sqmm Al. Ar. XLPE Cable.
303 ½ C x 185 Sqmm Al. Ar. XLPE Cable.
313 1/2 C x 50 Sqmm Al. Ar. XLPE Cable.
324 C x 16 Sqmm Al. Ar. XLPE cable.
332/3/4 C x 4 Sqmm Cu. Ar.XLPE cable. (including labour amount)
342/3/4 C x 2.5 Sqmm Cu. Ar. XLPE Cable.
352/3/4 C x 1.5 Sqmm Cu. Ar. XLPECable.
3619C x 1.5 Sqmm Cu. Ar. Cable.
37PART – F : CABLE TERMINATION MATERIALSTermination of the following cables by using of siemens type & Flange type glands, crimping sockets and glands earthing including copper – foil with all accessories required to complete the work.
383 ½ C x 300/400 Sqmm Al. Ar. XLPE Cable.
393 ½ C x 185 Sqmm Al. Ar. XLPE Cable.
403 1/2 C x 50 Sqmm Al. Ar. XLPE Cable.
412/3/3.5/4 C x 6/10/16 Sqmm Al. Ar. XLPE cable.(including labour amount)
422/3/3.5/4C x 4 Sqmm Cu. Ar. XLPE Cable.(including labour amount)
432/3/3.5/4 C x 2.5 Sqmm Cu. Ar. Cable.(including labour amount)
442/3/3.5/4 C x 1.5 Sqmm Cu. Ar. XLPE Cable.(including labour amount)
4519C x 1.5 Sqmm Cu. Ar. XLPE cable.(including labour amount)
46PART – G : MISCELLANEOUSSupply & Erection of Single Phase 20A Enclosure with 20A DP MCB for incoming control (including labour amount)Supply and Erection of the following:
4711KV Danger board
4811KV Hand Cloves (right & left) with suitable box(including labour amount)
49i. Round Bottom fire bucket.(9 Litre)ii. Fire Bucket stand (suitable for 4 Bucket).
50First Aid box with medicine.
51Fuse Puller.(including labour amount)
52First Aid chart with frame (both Tamil & English)
53Dry powder type extinguisher 5 kgs
546mm Thick 1000mm width 2000mm long rubber mat.( 5 NOS)
55PART – H : ELECTRICAL INSPECTORATE EXPENSES :Preparation of drawings Submitting the same to the Cheif Electrical Inspectorate to Govt., following with them and getting approval from CEIG office.(Incidental Expenses included)
56As per Approved drawing completing the work part by part submitting completion report for the entire installation arranging inspection, getting defect report, submitting rectification report and getting the safety certificate from electrical inspectorate office.(Incidental Expenses included)
57PART – I : TNEB EXPENSES :Liasion with TNEB including submission of application forms, obtaining load sanction and other associated works.
58TNEB DEMAND EXPENSES
59PART – J : CIVIL WORKSCIVIL WORKS FOR TRANSFORMER YARD AND EARTH PITS
60Add G.S.T @ 18% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58625475
AUTHORITY Local Bodies
TENDER VALUE 93.50 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Municipal Adminitration And Water Supply Department
Work Description Tender for Providing Electrical Installation For 800 Kva Ht Connection At Kovilvazhi Corporation Land In Ward No 60.Estimate Amount : Rs.93.50 Lakhs
Basic Detail
Tender No E1/4811/2026/Z3
Bidding Type Tender
Location
City Tiruppur
State Tamil Nadu
Key Dates
Publish Date 20 Nov 2026
Submission Date 07 Dec 2026
Open Date 07 Dec 2026
Finance
Tender Value 93.50 Lakhs
Tender Fee Ref. Documents
EMD 1.87 Lakhs
Exemption Not Available
Document List
03_TECHNICAL_BID_DOCUMENT.pdf
a3d67757-96c1-4310-88a8-34e0e810b644.html
BOQ_874521.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
pdf

03_TECHNICAL_BID_DOCUMENT.pdf

html

a3d67757-96c1-4310-88a8-34e0e810b644.html

xls

BOQ_874521.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender