Educational and Research Institute Local Bodies Closing in 12 days TDR #58625341

Tender For Prividing Interior Arrangements For Auditorium In University College Of Engineering At Panruti In Cuddalore District.

Issued by Local Bodies · Cuddalore, Tamil Nadu
Tender Value
75.76 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
12 days left
EMD
48000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cuddalore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Prividing Interior Arrangements For Auditorium In University College Of Engineering At Panruti In Cuddalore District.

BOQ

Name of Work:- Prividing Interior Arrangements for Auditorium in university College of Engineering at Panruti in Cuddalore District.
Sl. No. Item Description
1Supplying, fabricating, erecting and fixing Hilux (or) equivalent for false ceiling upto a ceiling height of 4.5m from floor level and as directed by the departmental officers etc.complete complying with standard specification
2Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door:Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be m2 glazed with 5mm plain float glass / 6mm bison lam
3Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
4Supply and installation of three-track sliding uPVC windows shall utilize uPVC profile sections with an outer wall thickness of 2.30mm (±0.2mm), featuring an outer frame of 112mm x 52mm x 112mm, a shutter of 66mm x 42mm x 50mm, an interlock of 45mm x 36mm, and a glazing bead of 24.5mm x 16mm. All profiles of frames, sash, and mullion shall be reinforced, wherever required, with a 1mm thick GI steel section. Each window is to be equipped with various security devices, such as touch locks or crescent locks, along with nylon rollers and an aluminium track for smooth operation, all supplied as per requirements, compliant with relevant specifications, and as directed by departmental personnel. The windows shall incorporate 5mm thick Plain or Pinhead glass, held securely by TPE (Grey) weather-sealed gaskets. All corners and mullion joints of the frame and sash are to be mitred cut and fusion welded without any mechanical joints, with all welded joints neatly trimmed and finished with a grooved nib to ensure the final products are free from sharp edges. The complete window units shall be fixed into pre-finished openings by drilling and fastening through the outer frame using high- quality fasteners, and silicon sealant will be applied to fill the gap between the wall and window frame for a leak-proof installation and complete finish etc., Complete and as
5Providing and fixing Acoustic wall Panelling (equivalent ot Armstrong) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a \\"Helmholtz\\"fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be \\"tongue\\" and grooved\\" to receive special clips for installation. The back of the perforated panel shall have sound absorbing not woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by
6Supplying and fixing Vertical Blinds (Premium) as directed by the departmental officers etc. complete complying with standard specification. (M-0655)
7Supplying of visitor chairs cushioned seat & back with chrome finish metal frame as directed by the departmental officers etc. complete complying with standard specification
8Supplying of VIP revolving chairs cushioned seat with Head Support, Wheels, swivel, Armrest, Adjustable seat Height as directed by the departmental officers etc. complete complying with standard specification.
99.Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The wall putty shall be got approved by the Executive Engineer before use of work)
10GST 18 % Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58625341
AUTHORITY Local Bodies
TENDER VALUE 75.76 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Department Of Higher Education
Work Description Tender for Prividing Interior Arrangements For Auditorium In University College Of Engineering At Panruti In Cuddalore District.
Basic Detail
Tender No 26CE/2026-27
Bidding Type Tender
Location
City Cuddalore
State Tamil Nadu
Key Dates
Publish Date 20 Nov 2026
Submission Date 03 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value 75.76 Lakhs
Tender Fee Ref. Documents
EMD 48000
Exemption Not Available
Document List
a0780cc3-203c-47e3-9282-3e7ce5886059.html
BOQ_874448.xls
TenderDocumentPanruti.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

a0780cc3-203c-47e3-9282-3e7ce5886059.html

xls

BOQ_874448.xls

pdf

TenderDocumentPanruti.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender