Tender For Annual Maintenance And Special Repairs To Water Supply And Sanitary Arrangements And Toilets In Government Polytechnic College At S.Kollur In Villupuram District
Tender Value
3 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
12 days left
EMD
3000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Villupuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance And Special Repairs To Water Supply And Sanitary Arrangements And Toilets In Government Polytechnic College At S.Kollur In Villupuram District
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing Solid panel PVC door with PVC frame. Solid PVC door shutter using 19 gauge 19mm MS square tubes for styles and outer frame. 15mm MS square tubes for tops, lock and bottom rails, The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail, lock rail and bottom rail shall be 75mmx30mm. The over all size of frames shall be 50mmx45mm with suitable rabate for housing the shutter.(Solid panel PVC door with frame) |
| 2 | Dismantling Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs Tiles etc.,complete complying with standard specifications. |
| 3 | Flooring with ceramic tiles of Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 4 | Supplying and fixing the damaged of 160mm diameters of PVC Rain Water Down Fall Pipes having a working pressure of 4Kg/sq.cm including cost of necessary PVC shoe, PVC bend, C.I gratings of required dia and special clamps, brass screws, nails etc., and fixing of cast iron gratings at juction of paraper and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cost of removable iron grating. The PVC pipe shall be fixed on wall with special type of clamps,, special type \\"U\\" clamp at the centre of the pipe line shall be fixed in addition to those for more than 3.0M pipe length complying with standard specification. |
| 5 | Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the 25mm dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply (above ground level) |
| 6 | Supplying and fixing the damaged of Gun Metal Gate valve heavy type etc., with ISI mark of 25mm dia Gate valve including cost of shellac, thread ball, including labour charges for cutting and threading of GI pipes etc., complete complying with standard specifications and as directed by the departmental officers for both internal and external water supply arrangements. The Valve should be got approved by the departmental officers before use on work. |
| 7 | Supplying and fixing inposition 15mm dia Chromium Plated brass screw down tap (heavy type) of approved make confirming to ISS and including cost of shellac, thread etc., complying with standard specification and including cutting and threading wherever necessary (Taps should be got approved by the Departmental officers before use on works] |
| 8 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 9 | Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 10 | Supplying and fixing in position best quality of approved make white glazed earthernware wash hand basin (without pedestal) of size 550x400mm with a pair of cast iron brackets , including cost of 15mm diametre brass chromium plated pillar tap, 32mm diametre C.P.waste, 32mm diametre PVC waste pipe with rubber plug and chain, 15mm diametre gun metal wheel valve, 15mm dia brass nipple, 15mm dia nylon connection etc. including fixing the wash hand basin in the wall in position with pair of C.I.brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anti-corrosive paint including testing for leakage etc., complete complying with standard specification and as directed by the departmental officers.(The wash hand basin and specials should be got approved by the departmental officers before use on work) |
| 11 | Supplying and fixing the damaged white glazed earthernware lipped mouth flat back urinal of approved quality with G.I pipe connection to suitable length,32mm bell mouthed PVC connection,15mm dia G.M wheel value,fixing the urinal to the wall inposition with necessary T.W plugs, clamps, screws shellac etc., including dismantling masonry if necessary and redoing the same to original condition fixing the 15mm dia G.I pipe connection & wheel valve,painting the pipe with two coats of approved paint over one coat of primer & checked without any leakage complete complying with standard specifications [The urinals should be got approved by the Executive Engineer before use on works] |
| 12 | Supplying and fixing in position best quality PVC Soil/ Waste pipes (6 kg/cm2) of various size having ISI mark and providing leak proof joints including making connection to all sanitary fittings, dismantling masonry etc., complete complying with standard specification. (Above Ground level) |
| 13 | 75mm dia PVC Soil/waste pipes |
| 14 | 110mm dia PVC Soil/waste pipes |
| 15 | Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification and as direct-ed by the departmental officers. |
| 16 | Brick Work in Cement Mortar 1:5 (one cement & five m.sand) using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally, other type of bond shall be done as directed by the Executive Engineer in charge. |
| 17 | For Foundation and Basement |
| 18 | Plastering with cement mortar 1:5 (one cement and five P-sand) 12mm thick in all floors using fine P-Sand including neat finishing, curing, etc., complete complying with standard specification and as directed by the department officers. |
| 19 | Supplying and filling in foundation & basement with crushed stone filling M. sand in layers of not more than 15cm thick, well rammed, watered, and consolidated etc., complete complying with standard specification and as directed by the departmental officers. |
| 20 | Supplying and Filling 40mm size HBG stone jelly for dispersion trench around the stoneware pipe or in the leach pit or soak pit to the required thickness as directed by the Departmental Officers Complying with standard specification. |
| 21 | Supplying and Filling 20mm size HBG stone jelly for dispersion trench around the stoneware pipe or in the leach pit or soak pit to the required thickness as directed by the Departmental Officers Complying with standard specification. |
| 22 | Engaging Service Labours for the day to day maintaining the buildings,roads,trees,lawens, gardens,attending to petty repairs,cleaning bushes,cleaning ,terrece, ,pavement drains,renewal of damaged doors and windows fixtures etc., water supply and sanitary arrangements pumps,moters etc.,and for assisting in preparation of plans,estimates and supervision of works and for maintaining the campuse etc.,complete |
| 23 | Carpenter-II Class |
| 24 | Plumber -II Class |
| 25 | Mazdoor Grade-I |
| 26 | Clearing Light Jungle etc., complete complying with standard specifications |
| 27 | Painting Old Plastered Wall Surface with One finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 28 | Pointing with Cement Mortar 1:3 to Full Depth of Tiles (Marble Slabs,Pressed tiles, Ornamental Tiles)etc., complete complying as per the standard specifications. |
| 29 | SUB TOTAL |
| 30 | GST @ 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender