Tender For Improvement Of Melmanagar Uphsc In Mangadu Municipality
Tender Value
2.60 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
18 days left
EMD
2600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanchipuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Melmanagar Uphsc In Mangadu Municipality
BOQ
| Sl. No. | Item Description |
| 1 | AC Ceiling Fan complete 1200mm (48\\") Sweep with 300mm Down Rod (without Regulator)(Crompton /Equivalent) |
| 2 | Manufacturing, Supply and delivery of table size 1800mm X 900mm X 750mm, using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board, with drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer. |
| 3 | Manufacturing, Supply and delivery of Computer table size 2400mm X 525mm X 750mm, using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board. The keyboard tray shall be of size 710mm (front width) X 300mm (depth) approximately is to be provided with end fittings made from minimum 2mm thick MS steel mounted on either side and the keyboard tray shall be easily slideable, provided with two telescopic channels with balls. The size of the open area for CPU should be 200 mm (W) x 400 mm (D) x 500 mm (H).The Cost shall incluidng drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer. |
| 4 | Manufacture and supply of S- Type ordinary chair for office use with MS pipes normal finishing . Seat & back is made up of the PVC wire mesh and the colour and quality as directed. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer. |
| 5 | Manufacture and supply of chair for Grade II officers rank use with revolving type using superior quality teak wood with premium finishing . Seat & back is made up of the luxurious high density foam covered with jute textured premium cotton cloth and the colour and quality as directed. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer. |
| 6 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification(DATA) |
| 7 | Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.(DATA) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender