Housing Urban and Rular Development Government Departments Closing in 12 days TDR #58625156

Tender For Special Repair To Leaky Roof, Flooring, Doors And Windows And Painting Work Arrangements To Lab Building In Ghs At Okkanadu Keelaiyur In Thanjavur District.

Issued by Government Departments · Thanjavur, Tamil Nadu
Tender Value
5.93 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
12 days left
EMD
5930
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Special Repair To Leaky Roof, Flooring, Doors And Windows And Painting Work Arrangements To Lab Building In Ghs At Okkanadu Keelaiyur In Thanjavur District.

BOQ

Name of Work:- Special Repair to Leaky roof, Flooring, Doors and Windows and Painting work arrangements to Lab building in GHS at Okkanadu Keelaiyur in Thanjavur District.
Sl. No. Item Description
1Dismantling and clearing away the clean removal of cement mortar plaster walls etc., complete.
2Dismantling clearing away and carefully stacking Material the Plain Cement Concrete
3Labour wrought and put up in position Shutters for Windows panelled including labour charges for fixing furniture fittings complying with standard drawings and standard specification.
4Labour wrought and put up in position Shutters for fully panelled doors (external or internal) moulded panels including labour charges for fixing furniture fittings complying with standard drawings and standard specification.
5Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification and as direct-ed by the departmental officers.
6Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
7Brick partition walls of 10.80cm thickness using best quality Burnt Clay Brick of size 8-3/4” x 4-1/4” x 2-1/4” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
8In Ground floor
9Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying,nsolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete multiplying with standard specification and as directed by the departmental officers. The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers -Mixing by Manual means
10Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 and above 20mm thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., complete complying with standard speicification and as directed by the departmental officers.(The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)
11Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
12Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.
13Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.
14Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
15Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
16Providing Black board Painting with one coat of block oxide paint of approved quality complying with standard specification.
17Supplying and fixing 50mm thickness 900mm Dia precast reinforced circular cover slabs of approved quality of soak pit/Rain water Harvesting pit Purpose. The Rate inclusive cost materials, Labours and conveyance etc,. The Rate is excluding 18% of GST Cost. (Quatation)
18Supplying and fixing 50mm thickness, 900mm dia RCC precast circular rings of approved quality for soak pit/Rainwater harvesting pit purpose. The rate is inclusive cost of materials, labours and conveyance etc,. The rate is excluding 18%GST cost.(Quatation)
19Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]
20For Fixing the sink without CI bracket
21Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)-Swan Neck Tap
22Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level / Below ground level.
2320mm dia
24Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements
2520mm dia Elbow
2620mm dia Tee
2720 mm x 15 mm Dia Reducer
28Add GST @ 18% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58625156
AUTHORITY Government Departments
TENDER VALUE 5.93 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Public Works Department
Work Description Tender for Special Repair To Leaky Roof, Flooring, Doors And Windows And Painting Work Arrangements To Lab Building In Ghs At Okkanadu Keelaiyur In Thanjavur District.
Basic Detail
Tender No 10-2/2026-2027
Bidding Type Tender
Location
City Thanjavur
State Tamil Nadu
Key Dates
Publish Date 19 Nov 2026
Submission Date 03 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value 5.93 Lakhs
Tender Fee Ref. Documents
EMD 5930
Exemption Not Available
Document List
0ef34db4-5e9f-4a73-afae-bb888ed6671a.html
BOQ_873844.xls
okkanadukeelaiyurcondition.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

0ef34db4-5e9f-4a73-afae-bb888ed6671a.html

xls

BOQ_873844.xls

pdf

okkanadukeelaiyurcondition.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender