Public Administrative Department Local Bodies Closing in 4 days TDR #58624394

Tender For Construction Of Community Sanitary Complex (Csc) At Nearkansra Primary School, Khosalpur Gp, Amta-1 Devlopment Block, Howrah Under Sbm(G) Fund Year 2026-27.

Issued by Local Bodies · Howrah, West Bengal
Tender Value
5.53 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
4 days left
EMD
11075
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Community Sanitary Complex (Csc) At Nearkansra Primary School, Khosalpur Gp, Amta-1 Devlopment Block, Howrah Under Sbm(G) Fund Year 2026-27.

BOQ

Name of Work:- Construction of Community Sanitary Complex (CSC) at NearKansra Primary School, Khosalpur GP, Amta-1 Devlopment Block, Howrah under SBM(G) Fund Year 2026-27.
Sl. No. Item Description
1DSR-2023, Vol.2, Page no.87 item no. 2.6.1;Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer in harge. All kind of soil
2DSR-2023, Vol.2, Page no.90 item no. 2.25;Filling available excavated earth (exeluding rock) in trenches, plinthsides of foundations etc. in layers not exceeding 20cm in depthconsolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.
3DSR-2023, Vol.2, Page no.90 item no. 2.27;Supplying and filling in plinth with sand under floors, including wateringramming, consolidating and dressing compIete.
4DSR-2023, Vol.2, Page no.96 item no. 4.1.6;I:3:6 (1 Cement : 3 coarse sand (zone-III) derived (rom natural sources6 graded stone aggregate 40 mm nominal size der wed from natur al sources)
5DSR-2023, Vol.2, Page no. 105 item no. 5.2.2;Reinforced cement concrete work in walls (any thic kness), includingatt ached pllast er s, buttr esses, plinth and string courses, fillets, columns pillars, piers, abutments, posts and struts etc. above plinth level up to floor five leve), exc)udi ng cost of centering, shuttering, finishing and reinforcement1:1.5:3 {1 ceme nt 1.5 coarse sand(zone-III) derived from natura sources 3 graded stone a8greg ate 20 mm nominal size derived fromnatural sources)
6DSR-2023, Vol.2, Page no. 107 item no. 5.9.5;Center ing and shuttering including strutting, propping etc. and removaof form for Lintels, beams, plinth beams, girders, bressumers andcantilevers
7DSR-2023, Vol.2, Page no. 107 item no. 5.9.6;Center ing and shuttering including strutting, propping etc. and removaof form for Columns, Pillars, Piers, Abutments, Posts and Struts
8DSR-2023, Vol.2, Page no. 107 item no. 5.9.3;Center ing and shuttering including strutting, propping etc. and removaof form for Suspended floors, roofs, landings, balconies and accessplatform
9DSR-2023, Vol.2, Page no. 110 item no. 5.22.6;Steel reinforcement for R.C.C. work including straightening, cutting bendi Jg, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
10DSR-2023, Vol.2, Page no. 119 item no. 6.12.2;Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)
11DSR-2023, Vol.2, Page no. 200 item no. 13;CEMENT PLASTER (IN COARSE SAND) 20 mm thick plaster of mix 1:6 ( 1 cement : 6 sans) for outer wall
12DSR-2023, Vol.2, Page no. 200 item no. 13;CEMENT PLASTER (IN COARSE SAND) 15 mm thick cement plaster on rough side or half brick wall of mix 1:6 ( 1 cement : 6 sans)
13DSR-2023, Vol.2, Page no. 200 item no. 13;CEMENT PLASTER (IN COARSE SAND) 12 mm thick cement plaster of mix 1:4 ( 1 cement : 4 sans)
14DSR-2023, Vol.2, Page no. 149 item no. 9.117;Providing and fixing factory made uPVC door frame made of uPVCextruded sections having an overall dimension as below (tolerance z 1mm), with wall thickness 2.0 mm (I 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm ( 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer ’ s specification and direction of En8ineerin- chargeFor 5 doors:
15DSR-2023, Vol.2, Page no. 150 item no. 9.120.1;Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 1Sx15 mm for top & bottom rails. M.S. trame shall have a coat of steel primers of approved make and manufactureM.S. frame covered with 5 mm thick heat moulded PVC ’C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PvC sheet out of which 7S mm shal be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and J15 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PvC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ’C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer‘s specification & drawing.30 mm thick plain PVC door shutters
16DSR-2023, Vol.2, Page no.203 item no. 13.41.1;INTERIOR FINISHINGDistempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
17DSR-2023, Vol.2, Page no.203 item no. 13.46.1;EXTERIOR FINISHINGFinishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
18DSR-2023, Vol.2, Page no. 181 item no. 11.43;Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based highpolymer modified quick-set tile adhesive (Water basedj conforming to IS: 15477, in average 3 mm thickfJes s.i) WaII [4.5 (3”0.125)]”[3—(2*0.I 25)]+4.20
19DSR-2023, Vol.1, Page no.132 item no. 8.31Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
20DSR-2023, Vol.-1, Page no.172 item no. 10.25.2;Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
217th Cozrigenda & Addenda (dtd 22.01.2020) of PWD SOR w.e.f 01.11.2017 of Item: 3 (I) A of Section - (B) - (IV): (Basic rate tacken for Howrah district from PWD sanitary & Plumbing schdule as per higher authority) Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the lO0mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thict gtet artificial store over t00 mm thick R.C.C (1:1.5:3) bottom slab including supplying, flttings and fixing all necessry specials, fittings, S.W tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefiling the sides of the tank with earth, removing spoils, fjlling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe & Mosquito proof mesh, should be follwed as per IS:2470, Part I. Payment will be made separetly on the basis of actual height based on relevant I.S.Code.(i) For 20 usersA) With Pakur variety. (Other than SAUL/TATA/RINL)
227th Cozrigenda & Addenda (dtd 22.01.2020) of PWD SOR w.e.f 01.11.2017 of Item: 3(I) A of Section - (B) - (IV) : (Basic rate tacken for Howrah district from PWD sanitary & Plumbing schdule as per higher authority) Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having \50 mm intermediate cement brick work (1:4) band all round and cemenl brick work (3:4) upto 0.90 metre from top with 20mm thick cement plastering [I:4) Io inside face upto the depth of cement brick work LSmm thick cement plaster {1:4) on outer face from top of the wel upto G.f. and 6 mm thicl‹ cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) Including R.C.C. cover slab of T00 mm thick with cement cone (I: 1.5:3) with stone chips witfi necessary reinforcement and shuttering including one 560 mm dia. A.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the Cover slab with necessary fitcings, making I acessary arrangements fa .pipe connections, excavation of well includii g shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement briEk work (1:6) and 1.00m inside dia.(Other than SAIL/TATA/RjNL)
23DSR-2023, Vol.2, Page no.245 item no. 17.15;Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
24DSR-2023, Vol.2, Page no.245 item no. 17.13.2;Providing and fixing white vitreous china water closet squatting pan (Indian type) :17.13.2 Orissa pattern W.C. pan of size 580x440 mm
25DSR-2023, Vol.2, Page no.246 item no. 17.18.1;Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 17.18.1 10 litre capacity - White
26DSR-2023, Vol.2, Page no.246 item no. 17.20.2;Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 17.20.2 Black solid plastic seat with lid
27DSR-2023, Vol.2, Page no.246 item no. 17.23;Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
28DSR-2023, Vol.2, Page no.246 item no. 17.24;Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
29DSR-2023, Vol.2, Page no.246 item no. 17.25.5;Providing and fixing white vitreous china wash basin including making allconnections but excluding the cost of fittings : 17.25.5 Flat back wash basin of size 450x300 mm
30DSR-2023, Vol.2, Page no.247 item no. 17.28.2.1;Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 17.28.2.1 32 mm dia
31DSR-2023, Vol.1, Page no.247 item no. 17.32.2;Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 17.32.2 Rectangular shape 453x357 mm
32DSR-2023, Vol.1, Page no.253 item no. 17.73.1;Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. Used as grab Bar for specially for differently abled, kids, and oldage persons ( 2 for bathroom & 1 for for grab bar)
33DSR-2023, Vol.-2, Page no.253 item no. 17.71;Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
34DSR-2023, Vol.-2, Page no.288 item no. 19.19.1.1;Providing and fixing in position pre-cast R.C.C. manhole cover and frameof required shape and approved quality. Rectangular shape 600x450 mm internal dimensions
35DSR-2023, Vol.-2, Page no.265 item no. 18.47; Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, wlth cover and suitable locking arrangement and making necessary holes tor inlet, outlet and overflow pipes but without fittings and the base support for tank.
36DSR-2023, Vol.-2, Page no.258 item no. 18.7.1; Providing and fixing Chlorinated Polyvlnyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brasr threaded fittings, including fiaing the pipe with clamps at 1.00 m spacing. Thls includes jointing of plpes & fittings with one step CPVC solvent cement and testing of joints complete as per direction a Engineer in Charge. T5 mm nominal dia Pipes
37DSR-2023, Vol.-2, Page no.266 item no. 18.55.1; Providing and fixing PTMT stop cock of approved quality and colour IS mm nominal bore, 86 mm long, welghlng not less than 88 gms
38DSR-2023, Vol.-2, Page no.266 item no. 18.54.1; Providing and fixing PTMT blb cock of approved quality and colour. IN mm nominal bore, 86 mm long, weighing not less than 88 gms
39Supply & installation of 1 H.P. mini centrifugal self-priming monobIock pump (Tullu pump) Motor set with ali necessary fittings & fixing complete (ISI Brand); (Lump sum) (Considering yvater source is readily available)
40Electrification work
41Modified Estimated Cost after using conectton factor on DSR 2023 on account of GST @ 0.973
42Add Cost index @ 123 of Kolkata As per Memo no. 34(1)/SDG(Kol)/Cost Index/2025/1316 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58624394
AUTHORITY Local Bodies
TENDER VALUE 5.53 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Zilla Parishad
Work Description Tender for Construction Of Community Sanitary Complex (Csc) At Nearkansra Primary School, Khosalpur Gp, Amta-1 Devlopment Block, Howrah Under Sbm(G) Fund Year 2026-27.
Basic Detail
Tender No WB/HOW/AMTA-I/NIET/6957/26-27
Bidding Type Tender
Location
City Howrah
State West Bengal
Key Dates
Publish Date 19 Nov 2026
Submission Date 27 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 5.53 Lakhs
Tender Fee Ref. Documents
EMD 11075
Exemption Available
Document List
09a6bb0d-ffb3-4e59-a34d-8513fad3f5c3.html
BOQ_5214589.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

09a6bb0d-ffb3-4e59-a34d-8513fad3f5c3.html

xls

BOQ_5214589.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender