Public Administrative Department Local Bodies Closing in 6 days TDR #58618135

Tender For Nagar Nigam Kota, Administrative Building, C-Block, Rooms 201, 202, 203, And Other Locations – Renovation Work 1 (Nit 34)

Issued by Local Bodies · Kota, Rajasthan
Tender Value
8 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
6 days left
EMD
16000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Nagar Nigam Kota, Administrative Building, C-Block, Rooms 201, 202, 203, And Other Locations – Renovation Work 1 (Nit 34)

BOQ

Name of Work:- uxj fuxe dksVk ds izkklfud Hkou ds lh&CykWd esa dejk ua- 201] 202] 203 esa ,oa vU; LFkkuks ij fjuksosku dk dk;ZA
Sl. No. Item Description
1WORK NAME
2Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)
3Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087 finished with a coat of aluminium primer on both sides & edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-sections 35 x15x1.5 mm size main runners and cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600x 1200 mm centre to centre including fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer ( aluminium frame work shall be paid separately.)
4Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood of lamination / painting quality and conforming to IS: 710
5Providing and fixing aluminium composite panel 5 mm thick by using 0.5 mm thick aluminium foil and 5 mm thick reflactive glass (sand bobbin ASHI India or equivalent) and framing of 2 mm thick aluminium section of 50 x 50 mm size silicon & glazing tap etc. complete up to IIIrd floor, pattern as approved by engineer in charge. (PWD BSR 2013 Item)
6Providing, stiching, fitting curtain made out of 100% polyster glow finished with wrinkle (crush) having weight 280gm per running mtr. In width of 124 cm cloth ( Net elevation area to be measured with blind cloth 2mm thick white based as per approved design ( Sample, color to be approved by the committee) as per direction of engineer in charge. Non SOR Item
7Providing RO System for pantry Room as per design and drawing of Architect as per design and drawing approved by Engineer in charge. Non SOR Item
8Providing SOFA Set with Cover as per design and drawing of Architect as per design and drawing approved by Engineer in charge. Non SOR Item
9Providing wooden table for RECEPTION COUNTERS/officers chambers of approved design with 19mm solid core board ISI marked water proof and 1mm thick mica at top and inside, Front having combination pattern with metalic laminate as per design and drawing of Architect as per design and drawing approved by Engineer in charge table with 8' length 2' width and 2'6\\" height as per design of Architect (Counter top area to be measured for payment) Non SOR Item Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58618135
AUTHORITY Local Bodies
TENDER VALUE 8 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Department Of Local Bodies
Work Description Tender For Nagar Nigam Kota, Administrative Building, C-Block, Rooms 201, 202, 203, And Other Locations – Renovation Work 1 (Nit 34)
Basic Detail
Tender No NNK/XEN/CIVIL/2026/599-613 nit 34
Bidding Type Tender
Location
City Kota
State Rajasthan
Key Dates
Publish Date 19 Nov 2026
Submission Date 26 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 8 Lakhs
Tender Fee 1000
EMD 16000
Exemption Available
Document List
174ffa0f-7905-43c8-b39f-002e1cc16baa.html
3401.pdf
BOQ_1075173.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

174ffa0f-7905-43c8-b39f-002e1cc16baa.html

pdf

3401.pdf

xls

BOQ_1075173.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender