Housing Urban and Rular Development Local Bodies Closing in 7 days TDR #58617931

Tender For Renovation Of Toilet Blocks (Boys & Girls) And Allied Works At Govt. Model Senior Secondary School, Rc I, Maloya, U.T., Chandigarh. (Ibm Scheme No. W1/2026/26664).

Issued by Local Bodies · Chandigarh, Chandigarh
Tender Value
85.41 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
7 days left
EMD
1.70 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of Toilet Blocks (Boys & Girls) And Allied Works At Govt. Model Senior Secondary School, Rc I, Maloya, U.T., Chandigarh. (Ibm Scheme No. W1/2026/26664).

BOQ

Name of Work:- Renovation of Toilet Blocks (Boys & Girls) and allied works at Govt. Model Senior Secondary School, RC I, Maloya, U.T., Chandigarh. (IBM Scheme no. W1/2026/26664).
Sl. No. Item Description
1Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
2All kinds of soil.
3Pipes, cables etc. not exceeding 80 mm dia.
4Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level
61:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
71:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
8Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
9Centering and shuttering including strutting, propping etc. and removal of form for :
10Suspended floors, roofs, landings, balconies and access platform
11Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
12Cold twisted bars
13Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
14Cement mortar 1:3 (1 cement :3 coarse sand)
15Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
16Granite stone slab of colour black, Cherry/Ruby red
17Area of slab over 0.50 sqm
18Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
19Providing and fixing Ist quality ceramic glazed wall tiles of size 600x300mm and above conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
20Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete :
21100x58x1.90
22Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
23250x16 mm
24Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
25150x10 mm
26Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete
27100 mm
28Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
29Profile B
30Fixing with adjustable lugs with split end tail to each jamb
31Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
32Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
3312 mm cement plaster finished with a floating coat of neat cement of mix :
341:3 (1 cement: 3 fine sand)
35Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
36Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour
37Old work (one or more coats)
38Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
39Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)
40Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead
41Of area 3 sq. metres and below
42Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
43Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
44Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
45W.C. pan with ISI marked white solid plastic seat and lid
46Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
47White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
48Providing and fixing white vitreous china water closet squatting pan (Indian type) :
49Orissa pattern W.C. pan of size 580x440 mm
50Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
51Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.
5210 litre (full flush) capacity-white
53Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
5432 mm dia
55Providing and fixing soil, waste and vent pipes :
56100 mm dia
57Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
5875mm diameter :
59Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
60Providing and fixing plain bend of required degree
61100 mm dia
62Sand cast iron S&S as per IS : 3989
6375 mm dia
64Sand cast iron S&S as per IS - 3989
65Providing and fixing heel rest sanitary bend
66100 mm dia
67Sand cast iron S&S as per IS - 3989
68Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
69100x100x100 mm
70Sand cast iron S&S as per IS - 3989
7175x75x75 mm
72Sand cast iron S&S as per IS - 3989
73Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :
74100 mm
75Sand cast iron S&S as per IS - 3989
7675 mm
77Sand cast iron S&S as per IS - 3989
78Providing and fixing terminal guard:
79100 mm
80Sand cast iron S&S as per IS - 3989
8175 mm
82Sand cast iron S&S as per IS - 3989
83Providing and fixing collar :
84100 mm
85Sand cast iron S&S as per IS - 3989
8675 mm
87Sand cast iron S&S as per IS - 3989
88Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :
89100 mm dia.
9075 mm dia.
91Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
92100 mm
9375 mm
94Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors.
95100 mm inlet and 75 mm outlet
96Sand Cast Iron S&S as per IS- 1729
97Provivding and fixing of PTMT 15 mm urinal spreader size 95x69x100mm with 1/2\\" BSP thread and shapes, weighhing not less than 60gms
98Providing and fixing PTMT urinal cock of approved quality and colour.
9915 mm nominal bore, 80 mm long, 42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gms.
100Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc
10125 mm dia nominal bore
102Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
10315 mm dia nominal bore
10420 mm dia nominal bore
105Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
10625 mm nominal bore
10720 mm nominal bore
108Providing and fixing uplasticised PVC connection pipe with brass unions :
10930 cm length
11015 mm nominal bore
111Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
11215 mm nominal bore
11320 mm nominal bore
11425 mm nominal bore
115Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
116Providing and fixing PTMT bib cock of approved quality and colour.
11715mm nominal bore, 86 mm long. Weighing not less than 88 gms.
118Providing and fixing PTMT pillar cock of approved quality and colour .
11915mm nominal bore, 107mm long. Weighing not less than 110 gms.
120Providing and fixing PTMT, push cock of approved quality and colour.
12115 mm nominal bore, 98mm long. Weighing not less than 75 gms.
122Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
12320 mm nominal bore, 120 mm long, weighing not less than 198 gms
124Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
125Cutting holes up to 30x30 cm in walls including making good the same:
126With common burnt clay F.P.S. (non modular) bricks
127Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
128Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
129100x100 mm size P type
130With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
131Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
132Providing & fixing looking glass of size 22\\"x16\\" with bevelled edge all side of approved make
133Providing and fixing white vitreous china flat back half stall urinal of size 420 x 395 x 635 mm with fittings, standard size C.P. brass flush pipe, spreaders and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Make as approved by EIC.
134Providing and fixing of chinaware Oval Shape wash basin. (Snow White). Cat. No. S2030104, Make Cera, Size: 560 x 470 x 190 mm complete in all respect to the entire satisfaction of EIC.
135Providing and fixing HCI P-Trap 100 mm.
136Providing and fixing of C.P. soap dish of make Viking, jainko, Cera or equivalent complete in all respects.
137Providing and fixing chinaware urinal partition of size 90x320x720mm complete in all respect. Make Cera cat no. S4090101
138Providing and fixing ISI Marked water proof 30 mm thick flush door shutters of pine frame sesoned and treated with seasoned pine filler and 2.5 mm gurjan core, fungus resistant , eco friendly with 1mm thick laminated on both side with phenol formaldehyde resin conforming to IS: 848;complete in all respect.
139Dismentaling glazed wall tiles including plaster and disposal of malba away from site at sutable making site for dumping of malba complete in all respect.
140Removal of cinder from depressed portion including stacking outside and felling after drying complete in all respect.
141Providing and fixing of C.P/SS long 32 mm bend.
142Providing & fixing Stainless steel grab rail of size 32 mm dia for disable toilets complete in all respect.
143Providing PVC pipe of 6kg/cm2 pressure 110 MM size complete in all respect.
144Providing and Fixing of drinking water cooler with storage capacity 400 ltr. (+/- 10%) have cooling cap 150 to 225 LPH. Full body stainless steel including storage tank SS grade refrigerant R-134A/R-32 complete in all respect conforming to IS 1475 Part-1 with upto dated amendments. Make:- Blue Star/Sidwal/Voltas/Climatrol.
145Providing and Fixing of Voltage Stabilizers with Nominal output- 230 Volts±10% complete in all respects Make Deol or Jewel, Volts, V-guard.
1465 KVA capcity
147P/F of Hi Flow water Filter-cum-Purifier including installation charges 3 Ltr/ Minute. Make Aqua guardrd/Kent/Usha /Pure-it. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58617931
AUTHORITY Local Bodies
TENDER VALUE 85.41 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Chandigarh Administration Engineering Department
Work Description Tender for Renovation Of Toilet Blocks (Boys & Girls) And Allied Works At Govt. Model Senior Secondary School, Rc I, Maloya, U.T., Chandigarh. (Ibm Scheme No. W1/2026/26664).
Basic Detail
Tender No PH7/2026/3274874
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 19 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 85.41 Lakhs
Tender Fee Ref. Documents
EMD 1.70 Lakhs
Exemption Not Available
Document List
2fc37269-8e1c-485f-a812-5af61aca08fd.html
BOQ_119393.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

2fc37269-8e1c-485f-a812-5af61aca08fd.html

xls

BOQ_119393.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender