Tender For Providing And Fixing Of Open-Air Gym Equipment And Jumbo 3-In-1 At The Park Near Ram Sharan Mandir, Park Near House No. 3090 And Green Belt Sector-15, Ward No. 12, Chandigarh, Under Wdf
Tender Value
3.32 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
6 days left
EMD
6657
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Of Open-Air Gym Equipment And Jumbo 3-In-1 At The Park Near Ram Sharan Mandir, Park Near House No. 3090 And Green Belt Sector-15, Ward No. 12, Chandigarh, Under Wdf
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing of Chest Press Double complete in all respects having following specifications.Size / Dimensions Length -1200 milimeterWidth- 700milimeterHeight – 1800milimeterMaximum weight -120 kilogramMaterial:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure strength, durability, and corrosion resistance. The main central pipe shall be an 80 mm NB GI pipe, while the handle frame and sheet frame shall each consist of 40 mm NB GI pipes. The connecting links shall be made of 32 mm NB GI pipes, and the footrest pipe shall also be 32 mm NB GI. The mild steel (MS) foundation plate shall have a minimum thickness of 12 mm. The foundation pipe shall consist of a GI pipe anchored 750 mm deep and supported with an MS angle of 25×25×4 mm for stability. The seat and backrest shall be made of high-density polyethylene (HDPE) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to enhance durability and resistance to corrosion. The movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. The closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (FRP) closing caps having a minimum thickness of 3 mm. All plastic components shall be UV-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.Colour:-Green, Paint finish- Power coated, UV resistant,Paint coating thickness (min) – 100 micrometer, Warranty - 3 years.Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 2 | Providing and Fixing of Parallel Bars complete in all respects having following specifications.Size/DimensionsLength- 900 millimeterHeight – 800 millimeterMaterial:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure strength and durability. The vertical or standing pipes shall be 40 mm NB with a thickness of 2.9 mm, and the horizontal pipes shall also be 40 mm NB with a thickness of 2.9 mm. The foundation pipe shall consist of a GI pipe anchored 500 mm deep and supported with a mild steel (MS) angle of 25×25×4 mm. The nominal bore of the foundation pipe shall be 40 mm NB with a thickness of 2.9 mm. The MS foundation plate shall have a minimum thickness of 12 mm. All nuts and bolts used for assembly shall be made of stainless steel to provide durability and resistance to corrosion. The open ends of all pipes, bearing bushes, and bases shall be fitted with fibre-reinforced plastic (FRP) caps having a minimum thickness of 2 mm. All plastic components shall be UV-stabilised and weather-resistant to ensure long-lasting performance under outdoor conditions.Colour:- Paint finish- Power coated, UV resistant, Paint coating thickness (min) – 80 micrometer, Warranty - 3 years.Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 3 | Providing and fixing of Three wheel shoulder Builder/ Arm wheel- outdoor Gym Equipment complete in all respects having following specifications.Size / Dimensions Height of central Pole from ground -1524 millimeterOutside diameter of first wheel - 850 millimeterOutside diameter of second wheel - 800 millimeterOutside diameter of third wheel - 650 millimeterHeight of first wheel from ground - 1220 millimeterHeight of second wheel from ground - 1200 millimeterHeight of third wheel from ground - 1180 millimeterMaximum weight -120 kilogramMaterial:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure quality and durability. The main central pipe shall be constructed using a 125 mm NB GI pipe, while the ring (wheel) shall be made of a 40 mm NB GI pipe. The spokes of the wheel shall consist of 15 mm NB GI pipes, with a total of six spokes per wheel. The foundation pipes shall be GI pipes anchored 750 mm deep, supported with mild steel (MS) angles of 25×25×4 mm, and shall have a nominal bore of 125 mm. The MS foundation plate shall have a minimum thickness of 12 mm. All nuts and bolts used for assembly shall be made of stainless steel to ensure durability and resistance to corrosion. The movement mechanism shall be equipped with ball bearings, which shall be self-lubricating and sealed to provide protection against rain, dust, and other environmental factors. The open ends of pipes, bearings, bushes, and bases shall be fitted with high-density polyethylene (HDPE) closing caps having a minimum thickness of 2 mm. All plastic components shall be UV-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.Colour:- Paint finish- Power coated, UV resistantPaint coating thickness (min) – 80 micrometerWarranty -4 years.Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 4 | Providing and fixing of double Surf Board - outdoor Gym Equipment complete in all respects having following specifications.Size / Dimensions Length -950millimeterWidth- 700millimeterHeight – 1300millimeter Maximum weight -120 kilogramMaterial :-All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure quality, strength, and durability. The main central pipe shall be made of 150 mm NB GI pipe with a thickness of 4.5 mm. The movement frame pipe shall be 32 mm NB with a thickness of 4 mm, while the connecting link pipes shall be 32 mm NB with a thickness of 2.6 mm. The handle frame pipe shall be 25 mm NB with a thickness of 2.6 mm. The foundation pipes shall consist of GI pipes anchored 500 mm deep and supported with mild steel (MS) angles of 25×25×4 mm, having a nominal bore of 100 mm. The MS foundation plate shall have a minimum thickness of 12 mm. The movement mechanism shall be equipped with ball bearings that are self-lubricating and sealed to provide protection against rain, dust, and other environmental factors. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to ensure long-lasting durability and corrosion resistance. The footrest shall be made of fibre-reinforced plastic (FRP) for strength and user comfort. The open ends of all pipes, bearings, bushes, and bases shall be fitted with GI closing caps having a minimum thickness of 3 mm. All plastic components shall be UV-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.Colour:- Paint finish- Power coated, UV resistant, Paint coating thickness (min) – 80 micrometer, Warranty - 2 years.Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 5 | Providing and fixing of Air walker/Stroller Single complete in all respects having following specifications.Size / Dimensions Length -1100 millimeterWidth- 460 millimeterHeight – 1480 millimeterMaximum weight – 100 kg.Material:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure strength, durability, and corrosion resistance. The main frame shall be made of 100 mm NB GI pipe, while the leg movement frame shall consist of 40 mm NB GI pipe, and the handle frame shall be constructed using 32 mm NB GI pipe. The movement mechanism shall be equipped with ball bearings that are self-lubricating and sealed to provide protection against rain, dust, and other environmental factors. The footrest shall be made of high-density polyethylene (HDPE) for enhanced durability and user comfort. The foundation pipes shall be GI pipes anchored 750 mm deep and supported with mild steel (MS) angles of 25×25×4 mm. The nominal bore of the foundation pipe shall be 100 mm, while the MS foundation plate shall have a minimum thickness of 10 mm. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to ensure long-lasting durability and corrosion resistance. The open ends of all pipes, as well as the bearings, bushes, and bases, shall be fitted with HDPE closing caps having a minimum thickness of 2 mm to provide a neat finish and additional protection. All plastic components shall be UV-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.Colour:- Paint finish- Power coated, UV resistant, Paint coating thickness (min) – 100 micrometer, Warranty - 3 years.Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 6 | Providing and fixing of Double Twister( One standing and One Sitting) outdoor Gym Equipment complete in all respects having following specifications.Size / Dimensions Length -1400 millimeterWidth- 680 millimeterHeight – 900 millimeterMaximum weight - 100 kilogramMaterial:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure quality, strength, and durability. The main central pipe shall be made of 100 mm NB GI pipe with a thickness of 4.5 mm. The standing/sitting twister frame pipe shall be 32 mm NB GI pipe with a thickness of 4 mm, while the rotating disk support pipe at the bottom shall be 80 mm NB GI pipe with a thickness of 3.2 mm. The handle frame pipe shall be 25 mm NB GI pipe with a thickness of 3.2 mm. The foundation pipes shall consist of GI pipes anchored 750 mm deep and supported with mild steel (MS) angles of 25×25×4 mm, having a nominal bore of 100 mm. The MS foundation plate shall have a minimum thickness of 10 mm. The movement mechanism shall be equipped with roller bearings that are self-lubricating and sealed to provide protection against rain, dust, and other environmental elements. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to ensure durability and corrosion resistance. The footrest shall be made of aluminum casting for enhanced strength and stability. The open ends of all pipes, as well as bearings, bushes, and bases, shall be fitted with fibre-reinforced plastic (FRP) closing caps having a minimum thickness of 2 mm to provide a smooth finish and additional protection. All plastic components shall be UV-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.Colour:- Blue, Paint finish- Power coated, UV resistantPaint coating thickness (min) – 80 micrometerWarranty - 2 years.Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 7 | Providing & Fixing of Jumbo 3 in 1:Area 4mx4m, Safe area 5mx5mStandard See Saw: This items provides a good entertainer for children. The seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 NB CI Pipe. The level is of 15 NB & 25 NB pipes. The bearing used is a heavy duty bush type.Double Swing: In the double sing the leg support is bending made of 40nb GI pipes and top pipe is 50nb GI pipes with GI Junction box with powder coating. The swing seat is made up of 10mm thick rubber belt. The belt seat is affixed on 6mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp.Wave slide: The wave slide chute shall be made up of 4mm thick of Fibre reinforced plastic with self pigmented. The wave shape should be in such manner that it will not give any jerk or bump to the rider. The chute has its end such as it causes safe landing of the child. The landing portion should be in horizontal with respect to the ground. There should be support provided made up of 25 NB GI pipe. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender