Tender For special repair To Rb In Judge Houses Sector 4 Chandigarh (House No 23 And Other Houses)
Tender Value
14.78 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
6 days left
EMD
29570
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To Rb In Judge Houses Sector 4 Chandigarh (House No 23 And Other Houses)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of green marble/ kota/ terrazo chips from dado or flooring including removing of malba to 50 meters complete in all respect and to the entire satisfaction of the Engineer in charge. |
| 2 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. Red sand stone |
| 3 | Providing and fixing 8 mm thick frameless toughened glass in the stairs railing/ Glazing in aluminium/UPVC section of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge . |
| 4 | Providing and fixing 2nd class teak wood (kiln seasoned) chowkhat 4 1/2\\" x 2 1/4\\"including cost of corner straps, iron hold fasts, hinges, screws,nails, fevicol etc. and spirit polish of chowkhats. Rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, disposal of rubbish to the dumping ground the rate further includes the cost of two coats Spirit polish complete in all respect and to the entire satisfaction of Engineer-in-Charge |
| 5 | Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side 4mm teak ply in the existing chowkhat. The rate includes the cost of all necessary stainless steel fittings and french spirit polish on teak ply complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 6 | Providing and fixing of cupboard shutter consisting of chowkhats frame of golden champ of 2 1/4\\" x 2 1/4\\" section with suitable rebate of 1\\" x 1/2\\" on outer side for shutter. The shutter are to be provided with 19mm thick commercial board pasted with 1mm mica on outer side amd 0.8 mm mica on inner side all around and fixed with chowkhat frame with piano hinges and screws etc. and provide with handle and magnetic catcher. chowkhat to be painted with two coats of special quality synthetic enamel paint after primer coat and preparation of surface. the complete frame is to be fixed with iron hold fasts, corners, straps, etc. complete in all respects and to the entire satisfaction ofthe Engineer in charge. |
| 7 | Providing and fixing 2'-0” deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, making shelves in cabinet 1mm mica on outer side & 0.8 mm thick inner side . The rate further includes the cost of lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface complete in position as per entire satisfaction of Engineer-in-charge. |
| 8 | French spirit polishing :One or more coats on old work |
| 9 | Providing and fixing golden champ jaffery on compound wall with frame of golden champ section 2” x 1.3/8” as horizontal member and vertical members fixed with golden champ and strips 4”x 3/8” @ 6” c/c on both faces sides faces of jaffery. The top of jaffery is to be covered with another strip of 2 x 1.3/8”. The complete panel is to fixed over existing wall and M.S. angle with iron nuts and bolts etc. The complete jaffery is to be painted with special quality over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) |
| 12 | Provding and installation of khaprail shape fibre sheet 3mm thick, fixing the sheet with the existing MS frame by self drilling screws, fixing of overlapping ridge at joints wherever required, including cutting to size and shape as required, cutting chase in wall and repairing the same, complete in all repsects and to the entire satisfaction of the Engineer in charge. |
| 13 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 14 | Providing and fixing heavy duty telescopic channel for drawers 18\\" to be fixed in the cabinet with superiior quality as approved complete in all respects and to the entire satisfaction of the Engineer in charge. |
| 15 | Providing and fixing Cupboard Locks to be fixed in the cabinets as approved complete in all respects and to the entire satisfaction of the Engineer in charge. |
| 16 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 17 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm |
| 18 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 19 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 20 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender