Tender For Running And Maintenance Of Various Judges Houses At Sector-4,5 And 7 (Under maintenance Booth Sector-7), Chandigarh(Ch To: 2216 (N.P.) maintenance And Repair )
Tender Value
5.72 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
14 days left
EMD
11442
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Running And Maintenance Of Various Judges Houses At Sector-4,5 And 7 (Under maintenance Booth Sector-7), Chandigarh(Ch To: 2216 (N.P.) maintenance And Repair )
BOQ
| Sl. No. | Item Description |
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4 |
| 2 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 3 | 12 mm cement plaster finished with a floating coat of neat cement of mix :DSR 13.7 |
| 4 | 1:4 (1 cement: 4 fine sand)DSR 13.7.2 |
| 5 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 6 | W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1 |
| 7 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.DSR 17.16A |
| 8 | Providing and fixing white vitreous china wash basin including makingall connections but excluding the cost of fittings :Flat back wash basin of size 550x400 mm DSR 17.25.2 |
| 9 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings as DSR 17.28 |
| 10 | 32 mm dia : DSR 17.28.1.1 |
| 11 | Providing and fixing soil, waste and vent pipes :DSR 17.35. |
| 12 | 75mm diameter : DSR 17.35.2 |
| 13 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 DSR 17.35.2.2 |
| 14 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors. DSR 17.60 |
| 15 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 16 | Sand Cast Iron S&S as per IS- 3989 DSR17.60.2.1 |
| 17 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. : DSR 18.10 |
| 18 | Internal Work - Exposed on Wall |
| 19 | 15 mm dia. nominal bore : DSR 18.10.1 |
| 20 | 20 mm dia. nominal bore : DSR 18.10.2 |
| 21 | Providing and fixing of forged brass / GM Gate Valve |
| 22 | size 20mm i/d DSR 18.17.1A |
| 23 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 24 | 45 cm length : DSR 18.21.2 |
| 25 | 15 mm nominal bore : DSR 18.21.2.1 |
| 26 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 27 | 15 mm nominal bore : DSR 18.46.1 |
| 28 | 20 mm nominal bore : DSR 18.46.2 |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 30 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 DSR 18.49 |
| 31 | 15 mm nominal bore. DSR 18.49.1 |
| 32 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51.1 |
| 33 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points ... DSR 18.53 |
| 34 | 15 mm nominal bore. DSR 18.53.1 |
| 35 | Providing and fixing of C.P. Brass Extension Nipple Size 15 mm x 50 mm of approved make and quality as per direction of EIC DSR 18.53A |
| 36 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 37 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms DSR 18.62.2 |
| 38 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 39 | With common burnt clay F.P.S. (non modular) bricks : DSR 18.76.1 |
| 40 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. : DSR 18.77 |
| 41 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.: DSR 18.78 |
| 42 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" i/d of approved make |
| 43 | Providing and fixing of Wall hung wash basin with full pedestal complete with C.I./MS brackets 32mm C.P. brass waste as per standard pattern including cutting and painting of brackets and making good the walls Make Cera Model CONCORD( Basin - 1022 & Pedestal 1121 ) or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 44 | Providing & Fixing Table Top Wash Basin Size 550 x 400 x 140 mm Make Cera model Calburt (S2020137) complete with CP Waste or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 45 | Providing & Fixing Table Top Wash Basin Size 500 x 420 x 200 mm Make Jaquar model Fonte FNS-WHT-40931 complete with CP Waste or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 46 | Providing and fixing of Anglular stop cock, With Wall Flange, Make Jaquar range Opal Prime Model OPP-CHR-15053PM or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 47 | Providing and fixing of Bib Tap with Wall Flange, Make Jaquar range Opal Prime Model OPP-CHR-15037PM or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 48 | Providing and fixing Single Lever Basin Mixer Without Popup Waste with 450mm Long Braided Hoses Make Jaquar range Opal Prime Model OPP-CHR-15011BPM or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 49 | Providing and fixing of chinaware Two Piece wall hung European Type Water Closet with all other fitting including EWC, Cistern, Seat Cover and fitting etc complete. Make CERA Model CRUSE / CAMPBELL or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 50 | P/F of chinaware One Piece Floor Mounted EWC complete with Cistern, Seat Cover and Twin Flush Fittings of make CERA Model CAMPBELL(Seat 2038/2099, Cistern 2118, Seat Cover 2328B, Twin Flush Fitting 2218 ) or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 51 | P/F of chinaware wall mounted/wall hanging Eurpeon Style W.C. 360MM x580mmx360mm of make ( JAQUAR) approved colour with all other fittings i.e seatcover Jaquar ARIA or equivalent model of other approved makes in the same range of Aor to the satisfaction of EIC |
| 52 | Providing and fixing of Single Lever 3-inlet Diverter Exposed parts kit Consisting of Operating Lever, Cartridge Sleeve, Wall Flange(with Seals), Button Assembley Sleeve and Button Cap (Compatible With ALD-193) Make Jaquar Model OPP-CHR-15193NKPM or equivalent in the same range of AOR |
| 53 | Providing and fixing Concealed Body for 3-inlet Singlr Lever Diverter with Button Assembly,Cartridge Sleeve but without Exposed Parts Make Jaquar Model ALD-CHR-193N |
| 54 | Providing and fixing of Sink Mixer with Swiniging Spout ( Wall Mounted Model ) with connecting Legs & Wall Flanges complete Make Jaquar range Florentine Model FLR-CHR-5309N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 55 | Providing and fixing of C.P. Towel Rail 600 mm long complete in all respects make Jaquar range Continental Model ACN-1111NM or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 56 | Providing and fixing of C.P. Towel Ring Square with round flange complete in all respects make Jaquar range Continental Model ACN-1121N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 57 | Providing and fixing of C.P. Tumbler Holder complete in all respects make Jaquar range Continental Model ACN-1141N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 58 | Providing and fixing of C.P. Towel Rack 600mm Long With Lower Hangers Complete in all respects Make Jaquar range Continental Model ACN-CHR-1185S or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 59 | Providing and fixing of Corner Glass Shelf ( with bracket ) make Jaquar range Continental Model ACN-1173N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 60 | Providing and fixing of Shower Arm Wall Mounted with Wall flange |
| 61 | SHA 479L450 / 450 mm long round or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 62 | Providing & fixing of Overhead Shower Square Shape Single Flow Make Jaquar Model |
| 63 | 150 mm / OHS 1605 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 64 | Providing and fixing of Hand shower Round Shape ( ABS body Chrome Plated with Gray Face Plate ) with Rubit Cleaning System make Jaquar Model |
| 65 | 80 mm dia / HSH 1937 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 66 | Providing and fixing Easy Flex Tube in Chrome Finish 1.5 mtr long with nuts complete make Jaquar Model SHA-549 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 67 | Providing and fixing of C.P. Toilet Roll Holder complete in all respects make Jaquar range Continental Model ACN-1151N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 68 | Providing & Fixing CP Soap Dispenser make jaquar Continental 1135N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 69 | Providing and fixing of C.P. Soap Dish Holder complete in all respects make Jaquar range Continental Model ACN-1131N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 70 | Providing & fixing Hand Shower (Health Faucet) (ABS Body) with 8mm Dia 1.2 Meter Long Easy Flexible Tube and Wall Hook Finish Chrome complete in all respects Make Jaquar Model ALD-CHR-573 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 71 | Providing and fixing of Gun metal peat valve ISI Marked |
| 72 | 15 mm dia nominal bore |
| 73 | Providing and fixing of C.P. brass Cup ( Heavy Duty ) of approved make |
| 74 | Providing and fixing bottle trap 32 mm size with 300 mm and 190 mm long wall connection pipes and wall flange Complete in all respect Make Jaquar or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 75 | Providing and fixing of Pneumatic pressure pump of 1HP with 24ltr cylinder, sensor and all electrical Connections, complete in all respect at site of make cromptom and kirloskar or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender