Tender For Repairing Of Electrical Wiring At Shyamli Guest House, Chirimiri Area. Nit No: Secl/Chrm/Em/E-Nit/26-27/50 Date: 19.11.2026
Tender Value
4.10 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
10 days left
EMD
5200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Korea → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Electrical Wiring At Shyamli Guest House, Chirimiri Area. Nit No: Secl/Chrm/Em/E-Nit/26-27/50 Date: 19.11.2026
BOQ
| Sl. No. | Item Description |
| 1 | Item Description |
| 2 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group A) |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required (2 X 4 sq. mm + 1 X 4 sq. mm earth wire) for power point wiring |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required (2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire) for light/fan/ exhaust fan/call bell |
| 5 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required (2 X 4 sq. mm + 1 X 4 sq. mm earth wire) for AC point wiring |
| 6 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required (2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire) |
| 7 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required |
| 8 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required |
| 9 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required |
| 10 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required |
| 11 | Supplying and erecting earth pit of minimum bore dia. 150 mm size, approved make safe earthing electrode consisting of pipe-in-pipe technology as per IS 3044-1987, made of corrosion-free GI pipe with constant ohm value surrounded by highly conductive compound with high charge dissipation, suitably for effective and maintenance-free earthing as mentioned below, with 3 metre pipe of 80 mm outer dia., 40 mm inner dia. and 14 mm terminal in soft rock/mars soil with 50 kg (two bags) back filling compound. |
| 12 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (single pole) |
| 13 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required (100 A) |
| 14 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required (200 A TP&N) |
| 15 | 200 amps. TPN, rising mains in metal enclosure with aluminium busbar including fixing clamp |
| 16 | Total Impact of GST for the Purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender