Housing Urban and Rular Development Government Departments Closing in 5 days TDR #58617883

Tender For General-Running Contract 2026-2027-Court Complex Kasasragod-General Electrical Work

Issued by Government Departments · Kasaragod, Kerala
Tender Value
84728
Estimated cost
Bid Submission
25 Nov 2026
5 days left
EMD
2118
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kasaragod → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for General-Running Contract 2026-2027-Court Complex Kasasragod-General Electrical Work

BOQ

Name of Work:- GENERAL-Running contract 2026-2027-Court complex kasasragod-General Electrical Work
Sl. No. Item Description
1Electrical works
2OD95712/2026-2027:Supply and renewing 36/45/50 mfd Capacitor suitable for compressor motor of 1TR/1.5TR/2TR AC unit in place of defective one
3OD95716/2026-2027:Charges for filling sufficient quantity of Freon 22/32/410A gas for existing AC unit including leak testing, rectifying defects if any, breezing and making the unit in good condition
4OD95710/2026-2027:Charges for dismantling the existing 1TR/1.5TR/2TR AC unit, servicing the whole unit using suitable plant water pressure pump and making the unit clean and good condition
590.3.19.3:Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture
690.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture
790.3.21.3:Supply & installation of light fittings on 'C/U' shaped flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture
8OD95714/2026-2027:Supply and fixing of 10 W LED bulk head fittings IP65 die cast aluminum Poly carbonate front cover directly on wall including drilling necessary holes, giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring making good the damages, colour washing etc as required.(Philips/Bajaj/Havells/Wipro
9OD95715/2026-2027:Supply and providing 9W LED bulb in the existing batten as required
1090.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
111.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
121.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
131.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
141.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
1590.5.1.3:Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell
1690.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator
171.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
1890.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply
19OD95713/2026-2027:Supply and providing Fan Capacitor suitable for Ceiling fan in the existing fittings as required.
20OD95711/2026-2027:supply , conveyance,, istallation, testing, commissioning of 250mm sweep light duty exhaust fan in plastic with all accessories
212.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole
222.10.4:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Triple pole
232.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
242.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required.40 amps
25OD95738/2026-2027:Charges for dismantling the borewell submersible motor pump. Motor scrapping, cleaning, removing the burnt winding, rewinding using suitable winding wire, varnishing, seating the winding in position, carrying out the brush work, reassembling the unit and making the unit in good condition including all connections Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58617883
AUTHORITY Government Departments
TENDER VALUE 84728
LAST DATE 25-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for General-Running Contract 2026-2027-Court Complex Kasasragod-General Electrical Work
Basic Detail
Tender No PWD/BLDG/TR/1990/2026_6_5_4/1
Bidding Type Tender
Location
City Kasaragod
State Kerala
Key Dates
Publish Date 19 Nov 2026
Submission Date 25 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 84728
Tender Fee 555
EMD 2118
Exemption Not Available
Document List
BOQ_1522516.xls
e763adaf-28a2-40d1-b178-73fc2261e303.html
materialslist.xls
Tendernotice_1.pdf
viewnit.pdf
viewsbd.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1522516.xls

html

e763adaf-28a2-40d1-b178-73fc2261e303.html

xls

materialslist.xls

pdf

Tendernotice_1.pdf

pdf

viewnit.pdf

pdf

viewsbd.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender