Housing Urban and Rular Development Government Departments Closing in 6 days TDR #58617714

Tender For Replacement Of Submersible Motor Along With Other Allied Works At Krishna Chander Park, Poonch

Issued by Government Departments · Jammu, Jammu and Kashmir
Tender Value
1.68 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
6 days left
EMD
4000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Replacement Of Submersible Motor Along With Other Allied Works At Krishna Chander Park, Poonch

BOQ

Name of Work:-
Sl. No. Item Description
1SITC of 7.5 HP, 415 V, 3-phase, 50 Hz submersible pump-motor assembly, suitable for the existing fountain system, along with 1 No. suitable DOL starter complete with overload protection, short-circuit protection, contactor, start/stop arrangement and necessary control accessories. Pump shall be selected for the required discharge and total head of the existing fountain system and shall be compatible with the existing delivery pipework and nozzle arrangement. The work shall include dismantling/removal of existing failed pump, installation, alignment, cable laying, electrical connections, testing and trial operation. Providing and fixing of suction mesh filter, suitably sized to match the pump suction/inlet connection, with adequate free-flow area and corrosion resistance, complete with suitable connection, support/fixing arrangement and accessories. The filter shall effectively prevent entry of debris/foreign matter without causing excessive suction loss. The item shall also include removal of accumulated debris, cleaning of the water body and minor repair/plastering of cracks wherever required for proper functioning. The complete job shall include labour, materials, transportation charges and applicable taxes.
2Providing & laying of 50 metres of 3-core × 6 sq.mm copper submersible cable.
3Providing & laying of 25 metres of 4-core × 1.5 sq.mm copper cable.
4SITC of 20 Nos. Chrome Plated fountain nozzles, of suitable type and size for the existing fountain arrangement, complete with suitable adaptors, threaded connections, fittings, locking arrangements and fixing accessories. Nozzles shall be compatible with the existing fountain pipework and shall be selected to provide satisfactory water discharge at the available pump pressure and flow. Each nozzle shall be securely fixed and properly aligned to achieve uniform fountain discharge. Complete with all material, labour, installation, transportation and applicable taxes.
5Repair and servicing of existing electrical control panel, including isolation/disconnection and subsequent reconnection of existing distribution lines. The existing panel comprises 100 A MCCBs – 2 Nos., including 1 No. for fountain, SPNs – 3 Nos. comprising 2 Nos. 32 A and 1 No. 40 A, 100 A copper bus bar, indication lamps and allied components. Work shall include checking and tightening of all incoming/outgoing terminals, inspection of MCCBs/SPNs, restoration of phase and neutral connections, replacement of defective internal wiring, ferrules, lugs, thimbles, terminal connectors and minor accessories wherever required, and proper reconnection of the pump starter and associated circuits. All connections shall be properly insulated, identified and dressed. The panel shall be tested for continuity, insulation, phase sequence, protection and satisfactory operation after completion. Existing 100 A components shall be retained only after confirming their serviceability and compatibility with the revised installation. Complete with labour, materials, transportation and applicable taxes.
6Repair and servicing of existing servo-controlled voltage stabilizer, including inspection, testing and fault diagnosis; cleaning and servicing of servo motor mechanism; replacement of 2 Nos. carbon brushes, wherever required; tightening of internal terminals and internal rewiring. The work shall include replacement, wherever found defective and required, of variable transformer coil, control PCB/controller card, digital voltmeter/ammeter display, 1 No. main contactor and 1 No. servo motor, with components of matching electrical rating and mechanically/electrically compatible with the existing stabilizer. The stabilizer shall be checked for input/output voltage, voltage regulation, servo operation, contactor operation, indication, protection and satisfactory operation under connected load. All replacement components shall be of suitable rating and compatible with the existing stabilizer. The job also includes the Providing and Filling of 30 litres of Transformer oil. Complete with labour, materials, transportation and applicable taxes.
7Rebate on account of old parts (absolute) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58617714
AUTHORITY Government Departments
TENDER VALUE 1.68 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Replacement Of Submersible Motor Along With Other Allied Works At Krishna Chander Park, Poonch
Basic Detail
Tender No MDJ/Tech/e-NIT/2026-27/89
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 19 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 1.68 Lakhs
Tender Fee 200
EMD 4000
Exemption Not Available
Document List
38fdfd92-4b5c-4ce7-a803-0c69a44b89a4.html
BOQ_1126166.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

38fdfd92-4b5c-4ce7-a803-0c69a44b89a4.html

xls

BOQ_1126166.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender