Bids Are invited for Custom Bid For Services - Hiring Of Services For Amc For Composite Civil Maintenance At Gti, Noida For A Period Of Two Years - Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As
Tender Overview
Project Description
Bids Are invited for Custom Bid For Services - Hiring Of Services For Amc For Composite Civil Maintenance At Gti, Noida For A Period Of Two Years - Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Getting Out And Disposal Of Excavated Earth Upto 50 M And Lift Upto 1.5 M, As Directed By Eic - All Kinds Of Soil , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50M And Lift Up To 1.5 M , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M. Surface Dressing. All Kinds Of Soil , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level: , 1:1.5:3 (1 Cement: 1.5 Coarse Sand:3 Graded Stone Aggregate 20Mm Nominal Size) , 1:3:6 (1 Cement: 3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level: 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 Graded Stone Aggregate 20Mm Nominal Size) , Centring And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Foundation, Footings, Bases Of Columns,Suspended Floors Roofs, Landing, Balconies And Access Platform, Lintels, Beams, Plinth Beams, Girders, Bressumes And Cantilevers,Columns, Pillars, Piers, Abutments, Posts And Struts,Etc , Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete: Tmt Bars. , Brick Work With Common Burnt Clay Non Modular Fps Bricks Of Class Designation 7.5 In Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) , Half Brick Masonry With Common Burnt Clay Non Modular Fps Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level And Up To Floor V Level In Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) , Brick Work With Modular Calcium Silicate Bricks Machine Moulded Conforming To Is:4139, Class Designation 10 Average Compressive Strength At All Levels : Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , P&F 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. , Granite Of Any Colour And Shade Area Of Slab Upto 0.50 Sqm. , Granite Of Any Colour And Shade Area Of Slab Over 0.50 Sqm. , Providing Edge Moulding To 18 Mm Thick Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Eic. Granite Work , Mirror Polishing On Marble Work/Granite Work/Stone Work Where Ever Required To Give High Gloss Finish Complete. , P&F In Wall Lining Flat Pressed Three Layer (Medium Density) Particle Board Or Graded Wood Pre-Laminated One Side Decorative Lamination And Other Side Balancing Lamination Grade I, Type Ii, Is : 12823 Marked, Including Priming Coat On Unexposed Arrangement And Screws Etc. Complete : 12 Mm Thick Sqm , P&F 1St Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacture) Of Approved Make In All Colours, Shades, Of Any Size As Approved By Eic In Skirting, Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Designing, Fabricating, Testing, Installing And Fixing In Position Curtain Wall With Aluminium Composite Panel Cladding, With Open Grooves For Linear As Well As Curvilinear Portions Of The Building , For All Heights And All Levels Etc. Including: Providing, Fabricating And Supplying And Fixing Panels Of Aluminium Composite Panel Cladding In Pan Shape In Metalic Colour Of Approved Shades Made Out Of 4Mm Thick Aluminium Composite Panel Material Consisting Of 3Mm Thick Fr Grade Mineral Core Sandwiched Between Two Aluminium Sheets (Each 0.5Mm Thick). The Aluminium Composite Panel Cladding Sheet Shall Be Coil Coated, With Kynar 500 Based Pvdf / Lumiflon Based Fluoropolymer Resin Coating Of Approved Colour And Shade On Face # 1 And Polymer (Service) Coating On Face # 2 As Specified Using Stainless Steel Screws, Nuts, Bolts, Washers, Cleats, Weather Silicone Sealant, Backer Rods Etc. Base Frame Work For Acp Cladding Is Payable Under The Relevant Aluminium Item , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Second Class Teak Wood , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is :2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is :2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Extra For Providing And Fixing Flush Doors With Decorative Veneering Instead Of Non Decorative Isi Marked Flush Door Shutters Conforming To Is: 2202 (Part I) On One Side Only , P&F Pre-Laminated Flat Pressed 3 Layer (Medium Density) Particle Board Or Graded Wood Particle Board Is : 3087 Marked, With One Side Decorative And Other Side Balancing Lamination Grade I, Type Ii Exterior Grade Is : 12823 Marked, In Shelves With Screws And Fittings Wherever Required, Edges To Be Painted With Polyurethane Primer (Fittings To Be Paid Separately). , 18 Mm Thick , 25 Mm Thick , Providing And Fixing Wooden Moulded Beading To Door And Window Frames With Iron Screws, Plugs And Priming Coat On Unexposed Surface Etc. Complete 50X12/50*20Mm , Fly Proof Stainless Steel Grade 304 Wire Gauge With 0.5 Mm Dia. Wire And 1.4Mm Wide Aperture With Matching Wood Beading/Aluminium Beading/Ss Beading, Base Frame To Be Paid Extra All Complete As Directed By Eic. , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses, Framed Work And Grills Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc. Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Et. Complete - Hot Finished Welded Type Tubes , P&F Stainless Steel (Grade 304) Railing Made Of Hollow Tubes,Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Eic, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). , Providing And Laying Ceramic Glazed Floor Tiles 300X300mm (Thickness To Be Specified By The Manufacturer) Of Ist Quality Conforming To Is: 15622 Of Approved Make In All Colours, Shades Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. , Providing And Laying Polished Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacture) With Water Absorptions Less Than 0.08% And Confirming To Is 15622 Of Approved Make In All Colour And Shade, Laid In 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. , Providing And Laying Polished Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacture) With Water Absorptions Less Than 0.08% And Confirming To Is 15622 Of Approved Make In All Colour And Shade, Laid With Cement Based High Polymer Modified Quick-Set Tile Adhesive (Water Based) Confirming To Is : 15477, In Average 6 Mm Thickness, Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete. , Kota Stone Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand) Including Skirting (If Required) Complete As Directed By Eic -- 25 Mm Thick , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. , P&F In Position Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) , Providing And Fixing Glass Mossaic Tiles On Finished Plain Wall Surface Of Size 20 Mm X 20 Mm X 4 Mm In All Colour, Design , Fixing In Customize Design As Per Direction Of Engineer-In- Charge. The Glass Mosaic Tiles To Be Fixed On The Wall Surface With The Help Of Approved Adhesive Applied At The Rate Of 2.5 Kg Per Sqm And Grouting Of The Same. The Rate Is Inclusive Of All Operation, Material And Required Pattern Approved By Engineer-In-Charge: , Crazy Ceramic Tile Flooring, With Under Layer 12 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand), With Joints Not Exceeding 5 Mm, Including Filling The Gaps With Ordinary Cement Mixture & Mixing With Synthetic Polyester Fibre, Triangular In Shape Having Specific Gravity Of 1.34 To 1.40, Cross Section Size Ranging From 10 To 40 Micron & Length Upto 6 Mm , Mixing Fibre @ 125 Grams Per 50 Kg Of Cement In Cement Mortar,Including Providing And Mixing Water Proofing Material In Mortar @ 1 Kg Per 50 Kg Of Cement, All Complete As Per Direction Of Engineer-In-Charge. , Grouting The Joints Of Flooring Tiles 600X600 Mm Having Joints Of 3 Mm Width, Using Epoxy Grout Mix Of 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg), Including Filling / Grouting And Finishing Complete As Per Direction Of Eic. , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. 75Mm Dia , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. 110Mm Dia , P&F False Ceiling Of 12.5 Mm Thick Tapered Edge Gypsum Moisture Resistant Board Conforming To Is: 2095- (Part I) : 2011 (Board With Bis Certification Marks) At All Height Including P&F Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Entre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Rimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills,Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting.
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by EIC - All kinds of soil | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by EIC - All kinds of soil |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5 M | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5 M |
| 3 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. Surface dressing. All kinds of soil | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. Surface dressing. All kinds of soil |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: |
| 5 | 1:1.5:3 (1 cement: 1.5 Coarse sand:3 graded stone aggregate 20mm nominal size) | 1:1.5:3 (1 cement: 1.5 Coarse sand:3 graded stone aggregate 20mm nominal size) |
| 6 | 1:3:6 (1 cement: 3 Coarse sand:6 graded stone aggregate 20mm nominal size) | 1:3:6 (1 cement: 3 Coarse sand:6 graded stone aggregate 20mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement: 1.5 Coarse sand: 3 graded stone aggregate 20mm nominal size) | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement: 1.5 Coarse sand: 3 graded stone aggregate 20mm nominal size) |
| 8 | Centring and shuttering including strutting, propping etc. and removal of form for: Foundation, footings, bases of columns,Suspended floors roofs, landing, balconies and access platform, Lintels, beams, plinth beams, girders, bressumes and cantilevers,Columns, Pillars, Piers, Abutments, Posts and Struts,etc | Centring and shuttering including strutting, propping etc. and removal of form for: Foundation, footings, bases of columns,Suspended floors roofs, landing, balconies and access platform, Lintels, beams, plinth beams, girders, bressumes and cantilevers,Columns, Pillars, Piers, Abutments, Posts and Struts,etc |
| 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete: TMT Bars. | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete: TMT Bars. |
| 10 | Brick work with common burnt clay non modular FPS bricks of class designation 7.5 in Cement mortar 1:4 (1 cement: 4 Coarse sand) | Brick work with common burnt clay non modular FPS bricks of class designation 7.5 in Cement mortar 1:4 (1 cement: 4 Coarse sand) |
| 11 | Half brick masonry with common burnt clay non modular FPS bricks of class designation 7.5 in superstructure above plinth level and up to floor V level in Cement mortar 1:4 (1 cement: 4 Coarse sand) | Half brick masonry with common burnt clay non modular FPS bricks of class designation 7.5 in superstructure above plinth level and up to floor V level in Cement mortar 1:4 (1 cement: 4 Coarse sand) |
| 12 | Brick work with modular calcium silicate bricks machine moulded conforming to IS:4139, class designation 10 average compressive strength at all levels : Cement mortar 1:4 (1 cement : 4 coarse sand) | Brick work with modular calcium silicate bricks machine moulded conforming to IS:4139, class designation 10 average compressive strength at all levels : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 13 | P&F 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. | P&F 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 14 | Granite of any colour and shade Area of slab upto 0.50 sqm. | Granite of any colour and shade Area of slab upto 0.50 sqm. |
| 15 | Granite of any colour and shade Area of slab over 0.50 sqm. | Granite of any colour and shade Area of slab over 0.50 sqm. |
| 16 | Providing edge moulding to 18 mm thick stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by EIC. Granite work | Providing edge moulding to 18 mm thick stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by EIC. Granite work |
| 17 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 18 | P&F in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : 12 mm thick sqm | P&F in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : 12 mm thick sqm |
| 19 | P&F 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades, of any size as approved by EIC in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | P&F 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades, of any size as approved by EIC in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 20 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. Base frame work for ACP cladding is payable under the relevant aluminium item | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. Base frame work for ACP cladding is payable under the relevant aluminium item |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 24 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) on One Side Only | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) on One Side Only |
| 25 | P&F Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). | P&F Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). |
| 26 | 18 mm thick | 18 mm thick |
| 27 | 25 mm thick | 25 mm thick |
| 28 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 50x12/50*20mm | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 50x12/50*20mm |
| 29 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading/aluminium beading/SS beading, base frame to be paid extra all complete as directed by EIC. | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading/aluminium beading/SS beading, base frame to be paid extra all complete as directed by EIC. |
| 30 | Structural steel work riveted, bolted or welded in built up sections, trusses, framed work and grills etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Structural steel work riveted, bolted or welded in built up sections, trusses, framed work and grills etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 31 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers et. complete - Hot finished welded type tubes | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers et. complete - Hot finished welded type tubes |
| 32 | P&F stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of EIC, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | P&F stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of EIC, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 33 | Providing and laying ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to Is: 15622 of approved make in all colours, shades laid on 20mm thick cement mortar 1:4 (1 cement: 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. | Providing and laying ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to Is: 15622 of approved make in all colours, shades laid on 20mm thick cement mortar 1:4 (1 cement: 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 34 | Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption's less than 0.08% and confirming to IS 15622 of approved make in all colour and shade, laid in 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. | Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption's less than 0.08% and confirming to IS 15622 of approved make in all colour and shade, laid in 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 35 | Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption's less than 0.08% and confirming to IS 15622 of approved make in all colour and shade, laid with cement based high polymer modified quick-set tile adhesive (water based) confirming to IS : 15477, in average 6 mm thickness, including grouting the joints with white cement and matching pigments etc. complete. | Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption's less than 0.08% and confirming to IS 15622 of approved make in all colour and shade, laid with cement based high polymer modified quick-set tile adhesive (water based) confirming to IS : 15477, in average 6 mm thickness, including grouting the joints with white cement and matching pigments etc. complete. |
| 36 | Kota stone flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab, including rubbing and polishing complete with base of cement mortar 1:4 ( 1 cement : 4 coarse sand) including skirting (if required) complete as directed by EIC -- 25 mm thick | Kota stone flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab, including rubbing and polishing complete with base of cement mortar 1:4 ( 1 cement : 4 coarse sand) including skirting (if required) complete as directed by EIC -- 25 mm thick |
| 37 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 38 | P&F in position Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) | P&F in position Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) |
| 39 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: |
| 40 | Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar,including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in-charge. | Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar,including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in-charge. |
| 41 | Grouting the joints of flooring tiles 600X600 mm having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of EIC. | Grouting the joints of flooring tiles 600X600 mm having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of EIC. |
| 42 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75mm dia | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75mm dia |
| 43 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia |
| 44 | P&F false ceiling of 12.5 mm thick tapered edge gypsum moisture resistant board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) at all height including P&F of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm entre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing rimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting. | P&F false ceiling of 12.5 mm thick tapered edge gypsum moisture resistant board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) at all height including P&F of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm entre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing rimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
TodayBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender