Tender For Providing Electrical Installation Work For New 4G Bts Sites Under Ph -Ix.2 Mobile Project Of Odisha Circle (34Nos Outdoor Sites).
Tender Value
30.64 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
61297
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Electrical Installation Work For New 4G Bts Sites Under Ph -Ix.2 Mobile Project Of Odisha Circle (34Nos Outdoor Sites).
BOQ
| Sl. No. | Item Description |
| 1 | Supply of hot pressed moulded SMC junction box , hinged door type of following size suitable for application for fixing electrical controls /switch gears/meters etc with provision for cable entry /exit from bottom /side, locking arrangments i/c supply and fixing of 2set 4 pole stud connectors, interconnections with suitable size single core PVC insulated copper conductor wire with copper sockets /lugs including fixing on existing M.S. angle stand etc as reqd. |
| 2 | a) Size not less than 400mm x 300mm x 190mm (inside Dimensions ) ( Make -Sintex,Model No JB-4030 or SS). |
| 3 | Making suitable angle base frame made of 40mm x40mm x5mm M.S. angle and 30mm x5mm M.S Flat for installation of SMC Junction Box i/c cutting , welding , fabricating, grouting the same on ground with required PCC work complete etc as reqd. |
| 4 | Supplying and fixing of 100A rating, 2 pole MCCB of thermal release range (80-100 )Amp , operating single phase ,240 volts, in the existing SMC junction box complete with connections, testing and commissioning etc. as required. ( Make - L&T ,( Model- DU100H )or SS ) |
| 5 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 6 | Providing and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 7 | Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 8 | Providing and fixing of earth bus of 50 mm x 5 mm GI strip of 400 mm length on surface with suitable size insulators, drilling holes for connections etc. complete as required. |
| 9 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed cable as required. |
| 10 | Supply of the following size PVC insulated & PVC sheathed Aluminium conductor armoured cable 650/1100 V. grade confirming to IS : 7098 (Part-1) 1988 etc. as required. (Make- Polycab/Havells/Glowstar/Finolex) |
| 11 | 2 core x 16 sq.mm |
| 12 | Laying/drawing of power cable upto 1.1kV grade of size not exceeding 35 Sqmm of as per following manner as required. |
| 13 | Directly in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 14 | In the existing GI /HDPE pipe. |
| 15 | on wall /surface |
| 16 | In existing masonary duct/On air |
| 17 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a). 2 X 16 sq. mm (19mm) |
| 18 | Supplying and laying of 40mm dia HDPE pipe of PN 8 for protection of cable complete as required.( Make : Oriplast /SS ) |
| 19 | Supplying & erection of 65mm dia G.I. pipe (medium class) of 6mtrs leghth with plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) of suitable size foundation including excavation and refilling and S/F of 40mm x 3mm G.I. Flat clamp with nut bolt on top portion of the pole for fixing of overhead cable etc complete as required |
| 20 | Sypplying and Fixing of 30 Watt LED street light Fitting on the existing GI bracket/pole i/c connection testing etc complete as required.( Make - Havells ( Model -ENDURA SUNDOWNSL30W) or SS make) |
| 21 | Sypplying and Fixing of 32mm dia L-class GI Pipe bracket for fixing of LED street light Fitting i/c connection testing etc complete as required. |
| 22 | Supplying and Drawing of 2core 4 sq mm weather proof AL conductor service cable on air etc complete as required. (Note : interconnection between Loop box to Street light fitting ) |
| 23 | Supplying & installation of SMC loop Box of size (155 x100 x60 )mm for street light loop box i/c S/F of 6A SP MCB & fixing the same on G.I Pipe/wall using G.I Nut Bolt ,stud connector with GI screws etc as req. (Make Sintex / SS ) |
| 24 | Charges for making co-ordination and liaison with supply company for obtaining Demand note / submitting test reports for energisation of LT line etc. complete as required.. Note : Application fees, Security, demand note charges, meter testing charges & Inspection fee or any other statutory charges pertaining to work shall be paid by BSNL . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender