Housing Urban and Rular Development Local Bodies Closing in 7 days TDR #58615874

Tender For .Construction Of The Statue Of Maharshi Vashistha And Development Work At Vashistha Kunj Housing Scheme, Ayodhya

Issued by Local Bodies · Ayodhya, Uttar Pradesh
Tender Value
38.19 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
7 days left
EMD
76400
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ayodhya → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for .Construction Of The Statue Of Maharshi Vashistha And Development Work At Vashistha Kunj Housing Scheme, Ayodhya

BOQ

Name of Work:- .Construction of the Statue of Maharshi Vashistha and Development work at Vashistha Kunj Housing Scheme, Ayodhya
Sl. No. Item Description
1Civil Work
2Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. All kind of soil-DSR 2023/ 2.6.1
3Earthwork in filling upto 8 km-SR
4Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)-DSR 2023 / 4.1.8
5Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in charge; for the following grades of concrete. Concrete of M25 grade with minimum cement content of 330 kg /cum-DSR 5.33.1.1
6Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more-DSR 5.22.6
7Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers-DSR 5.9.5
8Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement :6 coarse sand)- DSR 6.1.2
9brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)-(DSR 6.4.1)
10Supply, fabrication, and fixing of Corten steel back panel and canopy as per approved design, using 3 mm thick Corten steel sheets mounted over MS tubular framework (adequately sized for structural stability), including cutting, welding, surface treatment, pre-weathering, anchoring, and installation complete in all respects as per drawings and direction of Engineer-in-Charge.-MR
11CNC cutting of Corten steel panels used in back panel and canopy as per approved design, including layout, programming, precision cutting, edge finishing, handling, and all incidental works complete in all respects as per drawings and direction of Engineer-in-Charge.-MR
1212 mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand ( DSR 13.4.1)
13Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(DSR 13.80)
14Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) -DSR 13.47.1
15Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. -Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red -DSR 11.56.2
16Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineerin- Charge.Granite work-DSR 8.3.2
17Providing and laying factory made cobble shape paver block 80 mm thick, compressive strength >= M 30 steel mould compressive technology.(50% colour & 50% grey)-SR
18design work on back screen-SR
19Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works-DSR 10.25.2
20Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes-DSR 10.16.1
21Designing ,Fabricating,testing,installing &fixing in position Curtain wall with aluminium Composite Panel cladding,with open grooves for linear as well as curvilinear position of the building,for all heights and levels etc.including-(a) Structrual analyis and design and prepration of shop drawing for pressure equlisation or rain screen principals as required,proper drainage of water maketo make it weighttight including checking of all structural and functional design(b)Providing ,fabricating and supplying and fixing panels of aluminium composite panel cladding in Panshape in metallic colour of approved shadw made out of 4 mm thick aluminium composite panel material consisting of 3 MM thick fr grade mineral core sandwiched between two aluminium sheets(each 0.5 mm thick).Lumiflon bases fluropolymer resin coating of approved colour and shade on face #1 and polymer coating on face #2 as specified using stainless steel screws,whether silicon sealents,bracker rods etc.(C)The fastening brackets of aluminium alloy 6005 TS/MS with hot dip Galvanised with serrationsand and serrated washers to arrest the wind load movements SS316 p[ins as directed by Engineer in Charge.However for the purpose of payment onlythe actual area of external face with aluminium composite panels cladding shall be measured in sqm, up to two decimal places.- DSR 8.32
22Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.- (DSR 13.61.1)
23Sculpture (Guru Vashishtha) Supply & Installation of a Sculpture, Rishi figure will be made in High class fiber glass with green and brown patina like bronze sculpture and Rest of the bottom objects will be made in Corten Steel with High class finish with inside LED Light. Total work size: 5 ft. Height x 6 ft. Length x 6 ft. Width (Rishi Size: 4 ft. Height x 2.5 ft. Length x 2 ft. Width) Corten steel sheets ranging from 1.5 to 3 mm thick, known for its anti-rust properties and minimal maintenance, with an internal iron armature, PU coating, and color application as per the design and dimension of the objects will be made in the proportion of the main Rishi Sculpture. All costs—materials, design and conceptualization, transportation, installation, and artist fees—are included.Excluded: GST Pedestals
24Providing, fixing and Painting of CNC Cut Logo on 5 mm MS sheet size
258 layer Acryflex Synthetic system Paint (LDA approved rate)
26Horticulture works
27Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) , 0.60 cm dia and 0.6 cm deep ( Code no 2.14.3 DSR- 2025)-DSR 2.14.3
28Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm(code no 2.4 DSR-2025)-DSR 2.4.1
29Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).(code no 2.8 DSR-2025)-DSR 2.8
30Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge-DSR 2.9
31Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).-DSR 2.20
32Supply and mixing of Local Sand(@0.01CuM/Plant) including, cartage, loading, unloading all.
33Providing, stacking and Displaying Rhapis Palm having ht. 75 cm to 90 cm with 15 to 18 suckers, well developed, full of fresh and healthy leaves from bottom to top in 35 cm Plastic Pot/Cement Pot and as per direction of the officer-in-charge-DSR 5.31
34Providing and stacking of Chorisia speciosa height 150-165 cm. in poly bag size 25 cm as per direction of the officer-in-charge.-DSR 7.21
35Neelgiri grass turf with earth 50mm To 60mm thickness-DSR 10001
36Providing, stacking and Displaying Ixora dwarf different colour having 10 cm to 15 cm ht., well developed with fresh & healthy foliage with bloom in 15 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge-DSR 5.55
37Providing, stacking and Displaying Ixora singaporensis different colour having 30 cm and above ht., well developed with fresh & healthy foliage with bloom in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.-DSR 5.56
38Plantation and reffiling-DSR 2.57
39Electrical work
40Supply and laying of 3Corex6 sqmm aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.-SOR-2022/501/e
41Supply and laying of 4Corex16 sqmm aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Cable for Incomming supply-SOR-2022/501/I
42Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 and above protection complete in all respect (Agency should be provide the sample of lightg for approval in ADA Bollard light. hight should be 750mm to 1000mm ) Make-UP PWD)-SOR 2022/1442
43Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses/MCB, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect-SOR 2022/807 f/i
44S&F of 0.5 Amp. to 5 Amp. DP MCB (10 KA) C Curve-SOR 2022/1008
45Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.-SOR 2022/504D
46Supply and fixing of plain or pin type copper/Alluminium tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-SOR 2022/504/D
47Supply & Fixing of 40 Watt LED Surface Mounting Luminaire with PC Housing and opal finish cover confirming to IP 65 Complete in all respect for focus of sculture.-SOR 2022/1418(A)
48Supply and fixing and concealing of 32 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge-SOR 2022/150(A)
49Supply & Fixing of 9-10 Watt per meter(120 nos ) LED strips (IP-65) for backlight of CNC cutting for back side of sculture including suitable water proof driver-MR Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58615874
AUTHORITY Local Bodies
TENDER VALUE 38.19 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Ayodhya Farizabad Development Authority
Work Description Tender for .Construction Of The Statue Of Maharshi Vashistha And Development Work At Vashistha Kunj Housing Scheme, Ayodhya
Basic Detail
Tender No ADA 33 Tender DT 12-11-2026
Bidding Type Tender
Location
City Ayodhya
State Uttar Pradesh
Key Dates
Publish Date 19 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 38.19 Lakhs
Tender Fee 5900
EMD 76400
Exemption Not Available
Document List
b2d1ca63-8bb5-4ed9-b8df-c92dc2ab6a0a.html
BOQ_2292584.xls
DOCUMENT.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

b2d1ca63-8bb5-4ed9-b8df-c92dc2ab6a0a.html

xls

BOQ_2292584.xls

pdf

DOCUMENT.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender