Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #58615027

Tender For Spl/Repair Of Mt/Gun Shed Pillars & Repair Of Bldg No E-20, E-6, E-5, E-43, E-44, E-45, E-46, E-47, E-48, E-49, E-22 E-11, E-54, E-50, E-51, E-53, E-58, E-56, E-57, E-55 And Other Sanctioned Works Under Ge (West) Ferozepur Cantt

Issued by Statutory Bodies & Commissions/Committees · Firozepur, Punjab
Tender Value
43.55 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
18 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Spl/Repair Of Mt/Gun Shed Pillars & Repair Of Bldg No E-20, E-6, E-5, E-43, E-44, E-45, E-46, E-47, E-48, E-49, E-22 E-11, E-54, E-50, E-51, E-53, E-58, E-56, E-57, E-55 And Other Sanctioned Works Under Ge (West) Ferozepur Cantt

BOQ

Name of Work:- SPL/REPAIR OF MT/GUN SHED PILLARS & REPAIR OF BLDG NO E-20, E-6, E-5, E-43, E-44, E-45, E-46, E-47, E-48, E-49, E-22 E-11, E-54, E-50, E-51, E-53, E-58, E-56, E-57, E-55 AND OTHER SANCTIONED WORKS UNDER GE (WEST) FEROZEPUR CANTT
Sl. No. Item Description
1Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.
2Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.
3All as per item No 02 above here-in-before but using old bricks retrieved from demolition under item 01 hereinbefore including cleaning and removal of mortar from old bricks complete all as specified and directed.
4Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.
5Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified. Note :- Demolition of Mud puska to be cut in average thickness from top surface of roof for creating the slope complete all as specified and directed.
6M&L 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @ 3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane. Note: WPC shall be measured and paid separately complete all as specified and directed.
7M & L for applying evenly a tack coat of Industrial Bitumen 85/25 at the rate of 1.2 Kg per sqm incl cleaning surfaces complete all as specified and directed.
8M & L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (Wt not less than 150 gm/Sqm ) land on primed surface by forced applicatio complete all as specified and directed.
9M& L for applying two coats of solar reflactive bituminous based aluminium Paint @ 0.1 kg per sqm over APP membrane complete all as specified and directed.
10Supply only water proofing compound complete all as specified and directed.
11Brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed.
12All as per item srl No 7 here in before but using old brick tiles retieved from dismantling under item No 1 here in before including cleaning and removal of mortar from tiles.
13M & L Cover fillet in Plain Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate min radius of 75mm thick as in roof and parapet wall junction , roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, incl necessary sloping on roof including form work complete all as specified.
14Demoletion of reinforced cement concrete (reinforcement cut as required to facilitate demolition) (in Man holes) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
15Mild steel tmt bars 8 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to
16M & L plain cement concrete for nominal mix type( B-1) 1:2:4 using 20mm graded stone aggregate in plinth course,plinth band and similar work including necessary form complete as as specified and directed.
17M&L cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in foundation, filling and mass concrete and all other similar works complete all as specified and directed.
18Surface excavation n.exc 30 cm deep and averaging 15 cm deep complete all as specified and directed.
19M&L for 75 mm thik Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub bases,floors and paving etc. complete all as specified and directed.
20M & L for hardcore of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.
21M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
22Demolition of un-reinforced cement concrete in any position complete all as specified and directed.
23M&L Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed.
24M & L for 3 mm thick glass dividing stripps,38 mm and inserted in position to confirm to design complete all as specified and directed. width of strip complete all as specified and directed.
25Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm and not exc 4.00 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.
26Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed.
27S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle single composite unit with glazed and gauged shutter both dovetailed or welded and mild steel 8mm square bar grill welded to frame with one shop coat of zinc chromate primer complete all as specified and shown on drawing No. CEJZ/TD-1019/08 & CEJZ/TD-1020/08.
28Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.
29Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified.
30M & L for Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in bed block of hold fast, coping, including necessary form work complete all as specified.
31S&F for 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified.
32S&F in repair 1.00 mm laths thickness steel rolling shutters,without ball bearing,as specified including top cover,anchoring rod ,hasp and staple and one shop coat of primer,erected in position as indicated complete : push pull or manual type complete all as specified and directed.
33Ditto all as per item No 43 above but gear oprated type with bevel gear box and crank handle complete all as specified.
34S&F in repair safety lever locks mild steel with 4 levers for rolling shuters complete all as specified and directed.
35S&F in repair ball bearing for rolling shutters complete all as specified and directed.
36Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified
37Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide priming complete all as specified
38Preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of redoxide priming complete all as specified
39Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer
40M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 500gm/ litre and UV resirtance as per IS 15489.2004, Alkali & fungal resistance, dirt resistance extrior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre / 10sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm over new surfaces.
413mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.
42Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified as in repair.
43M&L for aluminium door handle, cast type, anodised 150 mm long and fixed with steel screws complete all as specified.
44S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.
45S&F for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified
46S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.
47M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate) noninal mix as in flooring /Hard standing complete all as specified . Note:- 1. flooring to be laid in alternate panels. 2. Dummy/ construction joints to be filled with Bituminous filler grade 'A'.
48M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified
49S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O
50Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.
51Rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair without using extra cement complete all as specified.
52Rendering 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and fair without using extra cement complete all as specified.
53Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.
54M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 1mm thick wall care putty complete all as directed.
55M&L for preparing newly plastered surfaces of wall and applying 2 coats of distemper oil emulsion over 1mm thick wall care putty complete all as directed of any shade on walls surfaces
56Preparation of old treated plastered surfaces including complete removal of existing treatment and applying two coats of cement base paint complete all as specified.
57Preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified
58Preparation of old plastered surfaces of walls & applying one coat coat of white wash complete all as specified.
59White wash in one coat on old plastered surfaces of ceiling including preparation of surfaces complete all as specified.
60Dismantling Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings
61Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layer not exc. 25cm hard and dense soil.
62S&F Roof trusses (framed), trussed, purlins, crame gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections), including distance pieces, cleats etc.
63Pre painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
64S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tesile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
65S&F in repair 5 mm thick coloured of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings all as per manufacturer’s fixing instructions complete all as specified and directed.
66Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed.
67M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete , all as specified and directed.
68M&L fancy designed 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to GI frame work in ceiling and all other similar works complete all as specified and directed.
69M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggt as in coping, apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating including use and waste of formwork complete all as specified.
70M&L rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/ concrete work surfaces complete all as specified
71M&L for preparation of new plastered surfaces and applying three coats of white wash complete all as specified and directed.
72Removal of excavation materials n.exc 50 m and depositing where directed at a level n.exc 1.5m above the startong point Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58615027
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43.55 Lakhs
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Spl/Repair Of Mt/Gun Shed Pillars & Repair Of Bldg No E-20, E-6, E-5, E-43, E-44, E-45, E-46, E-47, E-48, E-49, E-22 E-11, E-54, E-50, E-51, E-53, E-58, E-56, E-57, E-55 And Other Sanctioned Works Under Ge (West) Ferozepur Cantt
Basic Detail
Tender No 802026/GE-09/E8
Bidding Type Tender
Location
City Firozepur
State Punjab
Key Dates
Publish Date 19 Nov 2026
Submission Date 09 Dec 2026
Open Date 16 Dec 2026
Finance
Tender Value 43.55 Lakhs
Tender Fee 500
EMD 88000
Exemption Available
Document List
66bbac65-a75e-44b9-86f4-113098c00d5e.html
BOQ_896992.xls
Tender09.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 25 days

Tender Documents

Download All (ZIP) ↓
html

66bbac65-a75e-44b9-86f4-113098c00d5e.html

xls

BOQ_896992.xls

pdf

Tender09.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender