Agriculture Boards / Undertakings / PSU Closing in 9 days TDR #58614889

Tender For annual repair maintenance electrical installation At Fsd Amdalavalasa For The Year 2026-27. Sub Head: Electrification To Renovated Depot Office Building With New False Ceiling, Providing And Fixing Of Metal Doors To Damaged Db Doors, Recti

Issued by Boards / Undertakings / PSU · Srikakulam, Andhra Pradesh
Tender Value
5.76 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
9 days left
EMD
11530
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Srikakulam → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for annual repair maintenance electrical installation At Fsd Amdalavalasa For The Year 2026-27. Sub Head: Electrification To Renovated Depot Office Building With New False Ceiling, Providing And Fixing Of Metal Doors To Damaged Db Doors, Rectification Of Internal And External Lighting Inside Depot Complex And Other Connected Works.

BOQ

Name of Work:- ARMO EI at FSD Amdalavalasa for the year 2026-27. Sub Head: Electrification to renovated Depot Office Building with new false ceiling, Providing and Fixing of metal doors to damaged DB Doors, Rectification of internal and external lighting inside depot complex and other connected works.
Sl. No. Item Description
1Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
28 way , Double door
3Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).
44 way (4 + 12), Double door
5Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
6Single pole
7Single pole and neutral
8Triple pole and neutral
9Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies,shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.
101200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)
11Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required
12Supplying and fixing 20A ,240V, SPN industrial type socket outlet with 2 pole and earth, metal enclosed plugtop along with 20A\\"C\\" curve, SPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc as required
13Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.Group C
14Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
153 x 1.5 sq. mm
16Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
172 X 6 sq. mm + 1 X 6 sq. mm earth wire
182 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire
192 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
204 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
21Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
225/6 A switch
233 pin 5/6 A socket outlet
24LED Panel light 2x2 ft. (System lumen efficacy ≥105<120 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
2536 watt
26Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
274 Module (125mmX75mm)
286 Module (200mmX75mm)
2912 Module (200mmX150mm)
30Supplying and fixing extra fan down rod of 20 mm dia, 2 ft length, including painting etc. as required.
31LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
3272 Watt
33Supplying and fixing of SMC Weatherproof Junction Box on pole/truss/wall of size 400mm x 300mm x 190mm with IP65/66 rating etc., as required at the site of work
34Supplying and fixing of 600mm x 900mm size metalic frame cover and 3 mm thick M. S. sheet cover plate panel with double hinges and knobe type locking arrangement including welding, painting and finishing the good etc., as required
35Supplying and fixing of 450mm x 900mm size metalic frame cover and 3 mm thick M. S. sheet cover plate panel with double hinges and knobe type locking arrangement including welding, painting and finishing the good etc., as required
36Supplying and fixing of 600mm x 600mm size metalic frame cover and 3 mm thick M. S. sheet cover plate panel with double hinges and knobe type locking arrangement including welding, painting and finishing the good etc., as required
37Supplying and fixing of 300 mm x 300 mm size metalic frame cover fabricated with 25 mm x 25 mm x 3 mm thick angle iron welded construction frame structured and 1.6 mm thick M. S. sheet cover plate panel with double hinges and knobe type locking arrangement including painting, making recess in wall of 300 mm Width x 300 mm Height x 150 mm Depth, masonary, plastering & finishing the good
38Supplying, installation, testing and commissioning of 40W LED well glass(clear type) made of high pressure die cast aluminium housing and fixing on truss/wall/pole with suitable clamps and nuts& bolts including connection etc as required( as per latest ISO/IEC specification)(IP66 protection luminar efficiency >105m/W, CRI>75)
39Supplying, installation, testing and commissioning of 1200 mm 20W LED Aluminium LTT8-20 tubelight with extruded Al body (single side connection) with in-built driver and efficacy of 100 lumens/W by fixing in the existing T8 LED box type luminaire with G13 lamp holders using necessary clamps and also dismantling the existing tube including giving connections etc. at site of work as required.(NABL certified as per ISO/IEC specification)
40Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required.
41Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
42Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
43CREDIT ITEMS
44Dismantled DBs, switchgears etc.,
45Dismantled metal scrap
46Dismantled obsolete Box type Tubelight fittings/old LED Street lights/flood lights/Well glass with its accessories etc.,
47Dismantled copper insulated wire Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58614889
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 5.76 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Food Corporation Of India
Work Description Tender for annual repair maintenance electrical installation At Fsd Amdalavalasa For The Year 2026-27. Sub Head: Electrification To Renovated Depot Office Building With New False Ceiling, Providing And Fixing Of Metal Doors To Damaged Db Doors, Rectification Of Internal And External Lighting Inside Depot Complex And Other Connected Works.
Basic Detail
Tender No 06/2026-27 ARMO AMDALAVALASA
Bidding Type Tender
Location
City Srikakulam
State Andhra Pradesh
Key Dates
Publish Date 19 Nov 2026
Submission Date 30 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value 5.76 Lakhs
Tender Fee Ref. Documents
EMD 11530
Exemption Not Available
Document List
a8e3d654-55e8-44fa-a83a-526c22c25cde.html
BOQ_982530.xls
MTRARMOAmdalavalasa.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

a8e3d654-55e8-44fa-a83a-526c22c25cde.html

xls

BOQ_982530.xls

pdf

MTRARMOAmdalavalasa.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender