Power Boards / Undertakings / PSU Closing in 16 days TDR #58614279

Tender For Idk/ Sp Constructing Ht Abc Line Using Psc Poles-2 Km &Installation Of 100 Kva Dtr Under Es Upputhara

Issued by Boards / Undertakings / PSU · Idukki, Kerala
Tender Value
9.81 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
24600
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Idukki → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Idk/ Sp Constructing Ht Abc Line Using Psc Poles-2 Km &Installation Of 100 Kva Dtr Under Es Upputhara

BOQ

Name of Work:- IDK/ SP CONSTRUCTING HT ABC LINE USING PSC POLES-2 KM &INSTALLATION OF 100 KVA DTR under ES Upputhara
Sl. No. Item Description
1Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.
2Drilling hole of various sizes on existing Channel/Cross Arm.
3Providing one Driven Earth using GI earth pipe of size 38.1mm dia, 2.5m length at minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in loose soil.
4Erection of Anchor clamp / dead end clamp for 11kV ABC of any size
5Fitting and erecting one HT Double Pole Structure using PSC pole in position including fitting 2 channel cross arms, digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).
6Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.
7Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
8Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole including digging and back filling pits in ordinary soil, drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).
9Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
10Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.
11Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.
12Stringing, shackling, fitting cross arms, insulators and binding, giving jumper connection etc. using ACSR Rabbit for Phase and ACSR Weasel for Neutral, for one km LT three phase 4 wire line including cutting and removing tree branches wherever necessary and conveyance of all materials (except poles) from stacking place.
13Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
14Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
15Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.
16Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.
17Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.
18Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles
19Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane
20Fitting and providing one Strut using HT PSC pole including digging and back filling pit in ordinary soil.
21Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil & backfilling.
22Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable
23Erection of suspension clamp for 11KV ABC of any size
24Transportin poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.
25Additional Additional rate for providing one disc set, PG clamp etc. complete, on any type of HT pole for making cut point.
26Fitting 5 channel cross arms, AB switch, DO fuse, LA(Ord), HT & LT connections upto OH lines, etc. on existing DP structure, Fixing distribution box/provision for one set (3No.) of LT fuses, , drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing & mounting of Transformer on poles.
27Fitting one Additional V cross arm in existing single pole including conveyance of materials.
28Fitting one Additional 2.4/3m Channel cross arm (75x40x6mm), in existing 11kV DP including conveyance of materials.
29Fitting one additional Fuse unit and giving connection from Transformer to fuse and Distribution box to LT OH line.
30Providing Transformer fencing to a height of 1.8 m above ground level using MS Angle frames of size ISA 50x50x6mm for outer frame, 2 runs of 40 x 6 MS flat for horizondal brasing and grills with MS rods 8 mm Dia @ 10cm c/c for verticals, providing gate with locking arrangements, providing danger board & name board, embeding the legs in cement concrete 1:2:4, footing of size 30cmx30cmx50cm, painting with synthetic enamel paint two coats over one coat of iron primer etc complete, incl cost of transportation.
31Cleaning and levelling of transformer yard/RMU, spreading 40 mm broken stone in yard for a thickness of 10 cm above bed of 10 cm thick 6 mm broken stone, after constructing a curb wall of height 20cm above ground and 10cm below level including cost of all materials and charges for conveying, spreading, consolidating etc.
32Installing one DTR Meter with box (normal size 40x25x100cm) on existing poles including fixing of 3 CTs on bus bar, laying and termination of control cable using proper lugs, fixing of meters, capacitors, control fuses and giving the complete connections including conveyance of materials.
33Erecting one 100kVA Transformer to existing DP and giving connections, including loading from TMR/SRS/other stacking place & unloading at site but excluding cost for transporting transformer.
34Transporting Transformers by hired vehicle to a distance upto 5km and carrying upto 2 numbers of 63/100/160/250kVA Transformers / Ring Main Units excluding loading& unloading charges.
35Quoted Amount of BOQ1 in figures
36GST Rate in percentage Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58614279
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 9.81 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Kerala State Electricity Board
Work Description Tender for Idk/ Sp Constructing Ht Abc Line Using Psc Poles-2 Km &Installation Of 100 Kva Dtr Under Es Upputhara
Basic Detail
Tender No PMU/ TDPA/E tender/73/2026-27/ dated 04.011.2026
Bidding Type Tender
Location
City Idukki
State Kerala
Key Dates
Publish Date 19 Nov 2026
Submission Date 07 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 9.81 Lakhs
Tender Fee 2360
EMD 24600
Exemption Not Available
Document List
8e3c859a-1aea-4684-a9d3-9a09a5f235ed.html
BOQ_1511830.xls
GCC.pdf
Generaltermsandconditions.pdf
SpecialConditionsS.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

8e3c859a-1aea-4684-a9d3-9a09a5f235ed.html

xls

BOQ_1511830.xls

pdf

GCC.pdf

pdf

Generaltermsandconditions.pdf

pdf

SpecialConditionsS.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender