Tender For Establishment Of Public Library At Nangali Pyt. Nangali Block Nssb Under Untied Year 2026-27 1St Call
Tender Value
36.18 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
19 days left
EMD
72360
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Establishment Of Public Library At Nangali Pyt. Nangali Block Nssb Under Untied Year 2026-27 1St Call
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority:EXECUTIVE ENGINEER REW DIVISION POONCH Name of Work: Establishment of Public Library at Nangali Pyt. Nangali Block NSSB Under Untied Year 2026-27 1st Call e-NIT No. 178 of REW Poonch 2026-27 Dated:- 19-11-2026 Advertised Cost: Rs 36.18 Lakhs Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # |
| 2 | Item Description |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : |
| 4 | Engagement of manual Labour for Clerence of site including disposal of same all job done |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 20 mm nominal size) with 20% stones |
| 8 | Supplying and laying of stone soling hand packed including ramming watering underflooring |
| 9 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand |
| 12 | Half brick masonry with common burnt clay (non-modular) bricks of class designation Cement mortar 1:4 ( 1 cement : 4 coarse sand) in superstructure above plinth level upto floor V level |
| 13 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelCold twisted bars |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for: Stairs (excluding landings) except spiral staircases. |
| 21 | Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3(1 cement: 3 fine sand) including curing |
| 22 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 23 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood |
| 24 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30mm thick |
| 25 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 50 x 12 mm |
| 26 | Providing and fixing 30mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood |
| 27 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.150 mm tower bolts(D) |
| 28 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.100 mm tower bolts(W/V) |
| 29 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.Link/Godrej AI Drop lock type. |
| 30 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.Simple Aldrop. |
| 31 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.125mm handle. |
| 32 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.100 mm handle. |
| 33 | Providing and fixing bright finished brass hard drawn hooks and eyes 150 mm |
| 34 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work. |
| 35 | Painting of Synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work. |
| 36 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 37 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 38 | Finishing walls with water proofing cement paint of required shade on New work |
| 39 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 40 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 41 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia |
| 42 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe, 16mm dia. |
| 43 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 |
| 44 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 45 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore |
| 46 | roviding and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 47 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including paintingof fittings and brackets, cutting and making good the walls wherever required.White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 48 | Providing and fixing of 50 litre geyser of approved quality and make complete job |
| 49 | P/F door tee 100mm dia PVC of approved and make type B. |
| 50 | P/F plain bend 100mm dia PVC of approved and make type B. |
| 51 | P/F 100mm dia PVC Collar of approved and make type B. |
| 52 | P/F 75mm dia PVC Collar of approved and make type B. |
| 53 | P/F soil waste disposal pipe 100mm dia complete job done. |
| 54 | P/F soil waste disposal pipe 75mm dia complete job done. |
| 55 | P/F of PVC Cowel Cover over vent pipe of approved |
| 56 | P/F of 100*75mm reducer PVC of approved Quality. |
| 57 | P/F of MS stays and clamps for PVC pipes 75mm. |
| 58 | P/F Brass angle valve of approved quality. |
| 59 | Providing and fixing brass bib cock of approved quality.20 mm nominal bore |
| 60 | P/F of lighting points/charging points which shall include wiring for lighting points in1.5sq mm PVC insulated multi copper wire and 2.5sq mm and 6Amp thick PVC conduit with bends junction box etc. 6 Amp s pole MCB ,2 way DB for housing MCB and hylen sheets recessed in wall with accesories all job done. |
| 61 | P/F of heating points which shall include wiring for lighting points in2.5sq mm PVC insulated multi strand copper wire and 4 sq mm and PVC insulated multistrand copper wire for heating submains.16 Amp switch socket combined 2mm thick PVC conduit with bends junction boxes etc.10amp s pole,2 way DB for housing MCB with and hylen sheets recessed in wall accesories all job done. |
| 62 | P/F of Fan points which shall include fan points in 1.5sq mm PVC insulated multi strand copper wire and 1200 mm ceiling fan with rose and square and PVC square 350 watt electronic fan dimmer 2mm thick PVC conduit with bends junction boxes etc. 6amp s pole, MCB 10Amp DP MCB 2way DB for housing MCB with and hylen sheets recessed in wall accesories all job done. |
| 63 | supplying and fixing following way horizntal type three pole and neutral sheet steel, MCB distribution board, 415 volts, on surface/recess. Complete with tinned copper bus bar,neutral bus bar, earth bar,din bar,interconnections powdered painted complete. |
| 64 | Supplying and fixing air conditioner of approved brand and quality. |
| 65 | Carriage of Stone & Agg. 40mm/20mm avg. Lead by 05 KM |
| 66 | Carriage of Sand only |
| 67 | Carriag of Brick from avg. lead of 200KM |
| 68 | P/F of Aluminium work including 5mm thick Glass panes complete job done. |
| 69 | Add provision for SB/Inaguration Stone,site clearance paid as per actual LMR |
| 70 | Providing and fixing specified pre-laminated medium density board with one side decorative and other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required, (fittings to be paid separately).MDF board conforming to IS: 14587 edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand. |
| 71 | Engage carpenter 1st class for fitting of item no 53 |
| 72 | Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc |
| 73 | Providing and fixing CCTV Cmaeras of Approved quality including fixing complete. |
| 74 | Providing and fixing LED of Approved Quality including fixing complete |
| 75 | Providing Sitting chairs. |
| 76 | Providing and fixing wifi of approved quality including fixing complete(Airtel/jio). |
| 77 | providing and fixing inverter and stabilizer of Approved quality including fixing Complete. Total in Figures 3618003.41 3618003.41 INR Thirty Six Lakh Eighteen Thousand &Three and Paise Forty One Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender