Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #58612424

Tender For Special Rep To Bldg No P-293 (Vidhyanchal Guest Room) At Eme School,Vadodara.

Issued by Statutory Bodies & Commissions/Committees · Vadodara, Gujarat
Tender Value
34.10 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
17 days left
EMD
68200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Rep To Bldg No P-293 (Vidhyanchal Guest Room) At Eme School,Vadodara.

BOQ

Name of Work:- SPECIAL REP TO BLDG NO P-293 (VIDHYANCHAL GUEST ROOM) AT EME SCHOOL,VADODARA.
Sl. No. Item Description
1Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each
2-Ditto- as per item No 1 above but area n.exc. 1.5 Sqm each
3S & F for mild steel work as in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., Fe-290 (Gde E-165) complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
4M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by Engr-in-Chagre /GE.
5M&L 35mm thick 2nd calss hard wood (factory made) glazed and skeleton shutters, open rebated and prerpared to receive glass, gauge, etc edges of trimming plain chamfered or rounded fitted with cut and metered beads for securing/ gauge etc sizes of members of shutters as specified in SSR Part-I Section 8.20 (a) and all as specified.
6S&F of Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
7S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as specified and at the directions of Engineer-in-charge.
8S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. all as specified and directed.
9S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter with decorative laminate of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)SS screws complete all as specified and directed.
10Demolition of wall and ceiling boards, fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness, including cover fillets,all as specified.
11Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers with G.I. wire mesh to hanging and size of grid 605x605 mm Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre (Fillets, metal frame work and G.I. wire mesh paid separately) complete
12M&L for Solid PVC Wall Lining consisting of thickness not less than 5mm Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as directed by Engr-in-Charge.
13Providing and fixing WPC charcoal fluted/louver wall panelling of approved make, size and profile, having minimum thickness of 18-20 mm, fixed vertically/horizontally on aluminium/GI framework or treated wooden battens with approved adhesive and stainless steel fasteners, including edge trims, corner mouldings, cutting and fitting around openings, making good disturbed surfaces and all accessories required for complete installation, finished in approved shade and pattern, complete as directed by Engineer-in-Charge
14Providing and fixing aluminium composite panel cladding of approved colour and shade, minimum 4 mm thick, comprising of two aluminium sheets each of minimum 0.5 mm thickness bonded to a non-toxic polyethylene / FR core, conforming to relevant IS standards, fixed on aluminium framework made of extruded aluminium sections of approved size, duly fixed to RCC / brick masonry with approved anchor fasteners. Panels shall be machine cut, grooved, bent and fixed using aluminium cleats / SS screws / rivets as approved. Joints shall be uniform and sealed with approved silicone sealant. The work includes all necessary framework, fittings, fixtures, sealants, scaffolding, cutting, bending, wastage, labour and tools, complete all as specified and as directed by Engineer-in-Charge.
15Dismantling wrought iron or mild steel work of any description not otherwiseprovided for railing etc complete all as specifid and directed.
16M & L for mild steel work as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed
17Material and Labour for CNC laser-cut sheet panel for gate, made out of 2 mm thick MS sheet (IS 513 / approved make), laser cut to approved design, pattern and dimensions using CNC laser cutting machine, complete as per approved desgine, specifications and directions of Engineer-in-Charge
18Demolition of cement concrete (Unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level).
19M & L for 75 mm thick PCC 1:3:6 mix type C2 using 40mm graded stone aggregate as in paving finishing cone surface (plinth protection) even and smooth without using extra cement.
20Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.
21M & L for 25 mm thick cement concrete in flooring type Bo, 1:2:4 (12.5mm graded aggregate) for laying floor tiles.
22M&L for vitrified colour tile 9 to 10 mm thick area of each tile, exceeding 0.40 sqm but not exceeding 1.20sqm , as in floors etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile color including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 (Tile pattern and decoration may be as suggested by Engineer-in-charge)
23M&L for vitrified colour tile 9 to 10 mm thick area of each tile, exceeding 0.40 sqm but not exceeding 1.20sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:3 (Tile pattern and decoration may be as suggested by Engineer-in-charge)
24M&L for non skid colour ceramic tile 7 to 8 mm thick (Matt finished) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm , as in floors etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile color including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 (Tile pattern and decoration may be as suggested by Engineer-in-charge)
25M & L for glazed ceramic coloured wall tiles in vertical surface 300x 200/350x250/450/350mm &7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid overincluding 10 mm thick rendering as in vertical serfaces of wall finishes with CM 1:3 to receive wall tiles (Tile pattern and decoration may be as suggested by Engineer-in-charge)
26M & L for 18 to 20 mm thick machine cut green marbel stone in single piece in riser of steps, skirting, dado, window (Jambs/Cills), and pillar laid over cement screed and jointed with base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick plastering with cement mortar 1 : 4 complete all as specified
27M & L for 18 to 20 mm thick machine cut green marbel stone as in flooring, in steps in single piece over cement screed and jointed with base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed with cement mortar 1 : 4 complete all as specified
28M&L for 20-25 mm thick beeswax polished machine cut kota stone slab as in flooring , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
29S & F Mortice lock, vertical type, size 100 mm 4 lever brass type complete all as specified and directed.
30Supply and fixing 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete all as specified and directed.
31S&F 300 mmBrass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed
32S&F 150mm extruded brass handles, fabricated type polished all as specified.
33S&F 150 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed
34S & F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring etc and all as specified and directed
35S & F magnetic ball catcher of suitable size for cup board shutter all as per sample approved by Engr-in-Charge complete all as specified and directed
36S & F adjustable door spring capsule type of medium size all as per sample approved by Engr-in-Charge complete all as specified and directed
37S & F in repairs aluminum door seal of suitable section fixed to door shutter with screw complete all as specified.
38Providing and fixing 4 mm thick solar reflective glass of approved make and shade in existing/new steel, aluminium or uPVC window frames, including cutting to required size, removal of damaged glass where necessary, fixing with glazing clips, approved quality rubber/EPDM gaskets, glazing beads, sealant and all necessary fixtures and fittings, complete in all respects. The glass shall be capable of reducing solar heat gain and glare while maintaining adequate visible light transmission, all as specified and directed by the Engr-in-Charge.
39S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm dia and fixed with tinned tacks of galvanized wire staples and wooden bedding.
40Demolition of brick/stone massonry work built in cement mortar including all quoins, arches, pillars etc complete all as directed.
41Material & labour for brick work old size bricks built in CM (1:6) straight or curved exceeding 6mtr mean radius complete all as specified and directed.
42Taking down cement plaster from brick/concrete surface including racking out joint hacking for key scrubbing down with water etc complete all as specified and directed.
43M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for fair finished complete all as specified and directed.
44M & L for 15mm thick rendering in two layer on brick work or concrete surface of wall. 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement surface finished even and smooth without using extra cement over 10mm thick plaster in cement mortor 1:6 complete all as specified and directed. (Note : WPC shall be measured & paid separately)
45M&L Rendering 05 mm thick on fair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement)
46Supply only liquid water proofing compound (Dr Fixit Pidifin/ Fosroc/Sika)
47M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 2mm average thick water proof birla/ equivalent wall care putty and one coat of alkali resitant primer all as specified and as directed.
48M & L for prepartion newly plastered surface of ceiling and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed.
49M& L removing all existing loose treatment and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.
50M & L for complete removal of old existing treatment completely by scrapping and or rubbing of wall and applying two coats of oil bound distemper over a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed.
51M&L for preparation of newly wooden surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
52M&L for preparation of newly steel surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
53M&L for preparation of old steel surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint complete all as specified and directed.
54S & F in repairs 25mm dia stainless steel 202 grade tubular curtain rod as directed
55S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed
56Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth for bore of pipe 15/20 mm complete all as specified.
57Taking down steel tubing and connection including cleaning for refixing the same in new or old position all as directed of following size fixed on wall and ceilings:
5815mm dia
5920mm dia
60S & F 20mm dia galvanised iron tubing (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with necessary fittings and fixed to wall / ceiling or laid in floor jointed with tuflon tape all as specified.
61S & F 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
62S&F in repairs 60cm long CP Brass 20mm dia D type tubular towel rail with flanged ends.
63S & F in repairs C.P stainless steel grating of size 150 x 150 mm.
64S&F 600x450mm bevelled edge mirror of selected quality glass 6mm thick with PVC moulded frame and mounted on AC building board or commercial ply wood and fixed with wooden ply with chromium plated brass screws and cup washers.
65S&F in repair Vitreous china premium/ 1st quality wash down water closet Wash down water closet wall hung type EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified etc. complete including making good to floor. complete all as specified and as directed.(Make Jaguar/Cera/Essco)
66S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.(Make Jaguar/Cera/Essco)
67S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band (flush pipe) 32mm complete all as specified. (Make Jaguar/Cera/Essco)
68S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (Make Jaguar/Cera/Essco)
69S&F in repairs cabinate mirror rectangular shape with selected quality mirror and PTMT frame with opened door shutter with acrylic frame oustside mirror at famed of overall size 450 mm X 600 mm with sheles in side suitabele for Bath room complete all as specified and directed.
70S&F in repair vitreous china Wash hand basin, white , size 550x400 mm oval type below counter basin except taps, CP waste coupling but incl brackets all as specified. Make cera/Hindware (Make Jaguar/Cera/Essco)
71M&L Granite 20mm thick colour as approved by Engr-in-Charge (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms including cutting and nisking hole for oval wash hand basin and like in cement mortar (1:4) including pointing in white cement (1:2) using markie rusi with admixture of pigment to match with shade of granite over 15mm thick screed bed in cement mortar 1:6) complete all as specified and directed.
72M&L for Granite 18 to 20mm thick colour as approved by Engr-in-Charge (table rubbed and polished) for wall lining veneering to wall; 12mm thick in cement mortar (1:3) including isinting in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
73Supply and fixing CP Centre hole Wash Basin mixer three in One 15 mm bore pipe complet all as specified.
74Supply and fix PVC (SWR) Floor trap of size 75mm setting and jointing with solvent cement.
75Supply and fix PVC (SWR) Gully trap of size 125/110mm setting and jointing with solvent cement.
76S & F in repairs 15 mm bore CP stop cock/Angle cook cast copper alloy,fency type screwed down high pressure with capston head screwed for iron pipe (Make Jaguar/Cera/Essco)
77S & F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete all as specified. (Make Jaguar/Cera/Essco)
78S & F in repair CP wall mixer three in one system for mixing hot and cold wather screwed down for iron pipe 15 mm bore and fixed complete all as specified and directed. (Make Jaguar/Cera/Essco)
79S & F in repair Toilet Paper holder of chromium plated fixed to all with chromium brass screw complete all as directed. (Make Jaguar/Cera/Essco)
80S & F in repair 15 mm bore MS chromium plated shower rose of size 125 mm heavy grade with accessories completed all as specified. (Make Jaguar/Cera/Essco)
81S & F in repairs Chromium plated soap dish heavy duty fixed with brass screw complete all as directed. (Make Jaguar/Cera/Essco)
82Dismantling of water storage tank of 500 ltrs capacity.
83S & F rotational moulded PVC water storage tank 1000 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type Four-layered, white coloured with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I, including S&F tank adopter and Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed
84Supply & fix in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.
85Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.
86Taking down soil waste and vent pipe (any size or pattern) including all fittings complete all as specified and directed.
87S & F 110mm PVC (SWR) WC connector with lip ring all as specified and as directed.
88S & F 110mm PVC (SWR) WC connector bent type to fit WC outlet all as specified and as directed.
89S & F 110mm PVC (SWR) junction single, (Single T, 'Y' type) equal or unequal all as specified and as directed.
90S & F 75mm PVC (SWR) junction single, (Single, 'Y' type T) equal or unequal all as specified and as directed.
91S&F 40mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe
92S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 75mm bore pipe all as specified and as directed
93S & F 110mm PVC (SWR) vent cowl all as specified and as directed
94S & F 75mm PVC (SWR) vent cowl all as specified and as directed
95S&F PVC (SWR) bends without access door suitable for 75mm Bore pipe fixed complete.
96S&F PVC (SWR) pipes, 75 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches fixed complete
97S& F PVC (SWR) pipes, 110 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches fixed complete
98S & F PVC (SWR) bends without access door suitable for 75 mm mm bore pipe fixed complete.
99S & F PVC (SWR) bends with access door suitable for 100 mm mm bore pipe fixed complete.
100S & F in repair PVC connection 15mm bore with PTMT nut of length 450mm complete all as specifed and directed.
101M&L for cement concrete 1:3:6 type C-1 using 20mm graded sotne aggregate as in coping bed plate for hold fast etc including necessary from work etc complete all as specified and directed.
102M & L for complete removal of loose / cracked concrete , from RCC roof projection,chajja,fins,facia, roof bands etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement if required complete and applying three coat of white wash/two coat of cement base pint to match with the existing surface as directed by the Engr- in -Charge . (Reiforcement will be measured and paid saperately under respective item.
103Material and labour MS TMT bars 8-10 mm dia, cut to length bent to shape required including cranking/ Binding/ hooping of coloumns/hooking ends and binding with and including MS wire ( annealed) not less then 0.9 m dia or securing with clips complete
104Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, etc ( except tube light fittings), removing materials for taking credit and making good disturbed surface of wall, floors, etc complete all as directed by Eng-in-Charge.
105Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity.
106M&L for concealed point wiring with 1.5 Sqmm PVC-FRLS insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes made out of Pre-galvanized iron (GI) or cold-rolled closed-annealed (CRCA) mild steel with powder-coated or zinc-plated finishes for corrosion resistance , thickness ranges from 1.0 mm to 1.2 mm (20 Gauge) for structural rigidity ,Depth of box is between 45 mm and 60 mm to accommodate bulky wiring and modular mechanism frames & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge. incl cutting and chasing in stone/brick masonry all as specified and directed by Engr-in-charge .Note:- (i) Modular switch , socket and plate colour andmodel will be decided by Engineer- in-charge (ii) Catalogue of approved make shall be provided by contractor.
107One light point controlled by one switch.
108One ceiling /wall/exhaust fan point controlled by one switch .
109One bell point controlled by one bell push
110One 3 pin socket outlet 5 Amps independent board.
111One 3 pin socket outlet 5 Amps on the same board with other switch.
112One light point controlled by two Nos two way switches
113All as per item No. 104 here-inbefore but with 2.5 sqmm PVC insulated multistranded flexible unsheathed copper conductor inclusive of 2.5 sqmm PVC insulated multistranded flexible copper conductor for one independent 6 pin 16 Amp socket.
114S&F Modular switch, one way, 6 Amp 230, 1 module all as specified and directed by Engr in charge.
115S&F Modular switch, two way, 6 Amp 230, 1 module.
116S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt
117S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt .
118S&F socket Modular 6 Amp-2/3 pin combined 2 module
119S&F Modular bell push 6A one module .
120S & F modular ceiling rose surface polycarbonate body three terminal.
121S & F for Bell, AC, 230 volts, single pole complete all as specified and directed
122Supply and fixing LED batten lights fitting made of Aluminium extrusion 1x 20W (4 feet) , input voltage 140-270 V AC,CCT 6500K, Lumin efficency 100 lm/watt ,surge protection upto 4KV , Voltage protection upto 440 V AC.PF >0.9 , connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr -in -charge. Including Taking down old Tublight fittingsNote :-Warrenty on light should be of minimum 02 Years provided by the contractor.(i) CCT will be decided by Engineer-in-charge(ii) Warrenty on light should be minimum 03 years provided by the contractor.
123S&F round LED recess mounted downlighter 3 watt , input voltage 220 to 240 Volt AC , 50 Hz ,made of pressure die-cast aluminium heat sink & clear PC as a cover in white with independent driver ,(CRI) ≥ 80,Lumin 85 lumin/W , CCT will decided by Engineer-in-Charge complete all as specified and directed.Note (i) CCT will be decided by Engineer-in-charge(ii) Warrenty on light should be minimum 03 years provided by the contractor.
124Supply and fix of 7W LED picture light/mirror light made of aluminum/metal adjustable flexible neck ,input voltage 220 to 240 Volt AC,50 Hz Warm White (~3000K), Lumen Output ~350 to 585 lumens, (CRI) >80 complete all as specified and directed. Note (i) CCT will be decided by Engineer-in-charge(ii) Warrenty on light should be minimum 03 years provided by the contractor.
125Supply and fix of LED Rope 24 W ,220 Volt AC with high brightness for indoor applications CCT will decided by Engineer-in-Charge complete all as specified and directed. Note (i) CCT will be decided by Engineer-in-charge(ii) Warrenty on light should be minimum 03 years provided by the contractor.
126Supply and Fix of Universal Rope Driver Kit suitable for LED Rope lightNote (i) CCT will be decided by Engineer-in-charge(ii) Warrenty on light should be minimum 03 years provided by the contractor.
127Supply and Fix Rope light jointer for LED Rope LightNote (i) CCT will be decided by Engineer-in-charge(ii) Warrenty on light should be minimum 03 years provided by the contractor.
128S & F Decorative wall mounting with different finishes with soda glass type suitable for 7.5 W A60 LED Lamp with E27 base input voltage 220 to 240 volt AC complete all as specified and directed. Note (i) CCT will be decided by Engineer-in-charge(ii) Warrenty on light should be minimum 03 years provided by the contractor.
129Supply and fix of 3W LED bed side reading light made of polycarbonate adjustable flexible neck ,input voltage 220 to 240 Volt AC,50 Hz Warm White (~3000K), Lumen Output 220 lumens, (CRI) >80 complete all as specified and directed. Note (i) CCT will be decided by Engineer-in-charge(ii) Warrenty on light should be minimum 03 years provided by the contractor.
130S & F of BLDC White colour ceiling fan complete with blades electronic regulator , down rod and accesories from existing roof / trus to fall ceiling, and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE,Winding material 100 % copper ,350RPM air velocity 215m3/min,anti rust blades five star rated with brushless direct current motor including ceiling fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV ceiling fan complete all as specified and directed.Note : 1) Old ceiling fans shall be deposited to AGE E/M store yard for re issue to other buildings after repair/servicing or suryed off as per procedure in vogue etc.2). 02 years guarantee to be provided by the contractor.
131Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep mettalic body with all accessories (like mosquito net,shutter & louvers,nut fastner etc) including making hole in stone /brick wall grouting &making good in all aspects all as specified and directed. Note : 1) Old unserviceable Exhaust fans shall be deposited in MES store yard.
132Supply & fix wall mounted fan AC single phase 220 - 240 V of size 400 mm sweep ,1350 RPM ,50Hz PVC body with all accessories all as specified and directed.
133Supply and fix electric water heater, storage type, steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated horizental type complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and directedNote : 1) Old unserviceable water heater shall be deposited in mes store yard.
134Taking down and refixing connecting electric meter any type incl S & F suitable board close recessed type of suitable size All as specified and directed by Engir -in-Charge
135S & F Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.Note : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.
136S & F Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.Note : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.
137S&F double door metallic sheet metal enclosure DB double door VTPN suitable for housing 125 MCCB as incomer 4 Way 415 Volts with 160 Amps rated bus bars.
138S & F sheet metal enclosures (double door) for DBs where MCBs to be used single pole and neutral 12 way 240 V with 200 amps rated bus bar fixed on wall complete with all acessories including blanking plates for empty space complete all as specified and directed
139S & F MCB single pole, having rupturing 10KA, 6 amps to 32 amps as ordered 240 Volts
140S & F MCB Single pole and neutral (SPN), having rupturing 10KA, 240 V 40 to 63 amps as ordered.
141S & F MCCB 125 Amp , 10KA, 240/415 V four pole as directed.
142S&F Modular AC box metal enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as directed by Engineer-in-Charge
143S & F of LED street light fitting 35 Watt 230 V AC CCT 5700K Lumens ≥100 lm/watt outdoor type with high pressure die cast Aluminium housing high power led as lighting source and lens embedded pc cover having top opening seperate driver compantment and impact resistance of IK 07 WITH 10KV,OEM driver,PF 0.9, built in surge protection device heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection . including bracket made out of GI pipe light grade 32mm bore not less than 1.20m long bent to shape required fixed to pole with suitable size 2 Nos clamps made out of 25X3mm flat iron with nut, bolts and washers complete complete all as specified and directed.Note :- The warranty on light should be minnimum of 2 Years .
144Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.5 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron medium grade pipe 40mm bore in wall/floor/and GI Pipe 20 mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 3 of SSR 2009 ( Part-I).Notes (a) The unit rate shall include for GI protection pipe, GI watering pipe, wire mesh, funnel and excavation, RCC pit cover, test point, galvanised iron strip from top of earth plate upto 7.5 metres above ground level and if GI protection pipe is less than 7.5 metres, no price adjustment shall be made.(b) PCC pit shall be provided at least 50cm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction, elbow etc shall be deemed to be included in the unit rate.(c) If the testing result of earthing is not found below 3 Ω then the contractor shall do another earthing work at his own cost and nothing shall be permissible on this account.(d) Earthing work will be carried out in presence of MES representative. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58612424
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 34.10 Lakhs
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Rep To Bldg No P-293 (Vidhyanchal Guest Room) At Eme School,Vadodara.
Basic Detail
Tender No 8139
Bidding Type Tender
Location
City Vadodara
State Gujarat
Key Dates
Publish Date 19 Nov 2026
Submission Date 09 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 34.10 Lakhs
Tender Fee 500
EMD 68200
Exemption Available
Document List
119f3eaf-2fef-4414-9ea8-15f65427afaa.html
BOQ_896981.xls
Tendernotice_1.pdf
Tenderpages8139.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

119f3eaf-2fef-4414-9ea8-15f65427afaa.html

xls

BOQ_896981.xls

pdf

Tendernotice_1.pdf

pdf

Tenderpages8139.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender