Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #58612420

Tender For Provn Of 23X Water Tank 1000 Ltr Capacity At Mes Bldg No.P-08,P-09,P-10,P-14,P-15 & P-106 At Unit Location 5 Sikh Li, , Shed For Cook House Building Np P-16 At Unit Loction Of 5 Sikh Li, Laundry Shop At Unit Location Of 5 Sikh Li, Comman W

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
47.92 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
18 days left
EMD
85840
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of 23X Water Tank 1000 Ltr Capacity At Mes Bldg No.P-08,P-09,P-10,P-14,P-15 & P-106 At Unit Location 5 Sikh Li, , Shed For Cook House Building Np P-16 At Unit Loction Of 5 Sikh Li, Laundry Shop At Unit Location Of 5 Sikh Li, Comman Washing & Bath Area At Cod, Vehicale Repair Cum Washing Ramp Near Mt Area Of 505 Abw And Addn/ Altrn To Kitchen Roof Treatment, Shed, Path, Fencing And Other Connected Items In Bldg No P-3 At Kirby Place Under Ge (North) Delhi Cantt -10

BOQ

Name of Work:- PROVN OF 23X WATER TANK 1000 LTR CAPACITY AT MES BLDG NO.P-08,P-09,P-10,P-14,P-15 & P-106 AT UNIT LOCATION 5 SIKH LI, , SHED FOR COOK HOUSE BUILDING NP P-16 AT UNIT LOCTION OF 5 SIKH LI, LAUNDRY SHOP AT UNIT LOCATION OF 5 SIKH LI, COMMAN WASHING & BATH AREA AT COD, VEHICALE REPAIR CUM WASHING RAMP NEAR MT AREA OF 505 ABW AND ADDN/ ALTRN TO KITCHEN ROOF TREATMENT, SHED, PATH, FENCING AND OTHER CONNECTED ITEMS IN BLDG NO P-3 AT KIRBY PLACE UNDER GE (NORTH) DELHI CANTT -10
Sl. No. Item Description
1Excavation in trenches n exc 1.50m wide and n.exc 1.50 m depth for foundation etc in hard soil.
2Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified
3M&L PCC 1:4:8 type D2(40mm graded aggregate) as in fdn filling.
4M&L RCC 1:2:4 type B1(20mm graded aggregate ) as in cills lintel band etc.
5M&L in MS bar 10mm dia and over cut to lengfth bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than o.9mm dia or securing with clips CTD bars.
6All as per item No 7 above but 5mm dia and over up to and including 10mm dia in stirrups spacers and binders.
7M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter,complete all as specified.
8Returning filling including spreading, levelling and well ramming in layers not exc 25cm.complete all as specified.
9Removing execavated soil to a distance exc 250mtr but n.exc 500 mtr and depositing where directed.
10M&L moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick spread levelled and rammed including watering.complete all as specified.
11M&L hard core of gauge n.exc 63mm , degorited spread and levelled in layers n.exc 15mm thick watered and rammed to a tree surface with broken bricks.complete all as specified.
12M&L 75 mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate complete all as specified.
13M&L cement concrete type B1 1:2:4 (20mm graded aggregate) as in sub base of floor 25mm thick,complete all as specified.
14M&L for machine cut kota stone slab flooring 18-20 mm thick over 20mm thick cement screed bed using cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
15M&L for machine cut kota stone riser/skirting 15-20 mm thick over 15mm thick rendering using cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and beewax polishing complete.
16Supplying & fixing of PVC water storage tank 1000 ltr capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 20 mm - 210 gms ) . Note : (i) GI inlet, outlet & wash out pipe will be measured paid for separately.
17S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.
18S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.
19Cutting Holes in brick walls built in cement mortar superficial area n,exc 150 sqcm, complete as specified and as directed.
20S&F 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed.
21S&F 15 mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed.
22M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (external surfaces) finished even and smooth all as specified and directed by GE including taking down existing grit plaster of any thickness working heigh up to 32 mtrs with double scaffolding all as specified and directed by Engr-in-Charge.
23M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint over a coat of cement primer.
24Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed
25M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even all as specified and directed by GE.
26M&L preparing newly plastered or unplastered surface of wall and applying three coats of white washing complete all as specified and directed.
27M&L for Preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 1mm thick wall care putty on plastered surfaces preparatory to distempering complete.
28M&L brick work in CM ( 1:4 ) with using sub class `B ` modular brick straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and directed.
29S&F 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed.
30S&F Bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. (Make : ESSCO/Marc/Cera).
31S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
32S&F 110mm dia PVC bends of any radius acess door.
33S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door.
34S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.
35S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.Note: MTC and Screw Out Test will be provided by Contractor”
36Supply and fixing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of density 650 kg/cbm manufactured by an ISO-9001-2015 certified company. Door to be panelled with SS mosquito and XTN aluminium mesh for additional strength and safety purpose (confirming as per IS 4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19x6mm size steel screws, etc. complete all as specified& directed.”Note: MTC and Screw Out Test will be provided by Contractor
37S&F factory made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board / Laminated Board where shall be required, size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made froms Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws including taking dowm. All as per direction of GE, Material test certificate and authentication should be compulsory provided by the manufacturing company: For WC/Bathroom/Toilet/Kitchen & Cabinets and cupboard .”
38S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps 30 mm complete all as specified.
39S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified and directed.
40S&F 300mm extruded section SS sliding door bolt with hasp and staple and fixing bolt and nut (ISI Marked)
41S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed.
42S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed.
43M&L for Gypsum board 12 mm thick (Gyproc) for seamless false ceiling to flat surface fixed with screw over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish complete as per manufacturer instruction.
44S&F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section ,Tube etc), including distance pieces, cleats etc. confirming to Fe -290- Grade E-165 including cutting, welding & necessary fittings such as nut bolt, plate etc. complete all as specified and directed.
45M&L for preparation of new steel and iron surfaces of any description n.exc 10 cm width or girth and applying two coats of synthatic enamel paint over one coat of red oxide primer complete all as specified.
46S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
47Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat
48M&L RCC 1:2:4 type B1(20mm graded aggregate ) as in cills lintel band etc.
49M&L RCC M-25 using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like
50M&L M-25 design mix Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, roof beam,etc; basement slabs, under-reamed piles and mass concrete
51M&L Formwork to sides of pillars, posts, struts, piers, columns, and stanchions
52M&L RCC M25 for Columns, pillars, piers, posts and struts
53M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate
54M&L cement concrete type B1 1:2:4 (20mm graded aggregate) as in sub base of floor 25mm thick
55Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), and rubbish off the premises complete all as specified and directed.
56M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and directed.
57M&L Glazed ceramic / Digital elevation coloured tiles in vertical surface 300x600x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match as specified as diracted.
58M&L for 10mm thick rendering in CM (1:4) as in vertical surfaces of skirting dados repairs to steps complete all as specified and directed.
59S&F for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors/skirting etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match complete all as specified and as directed.
60M&L Granite 18-20 mm thick colour as approved ( of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over 15mm thick screed bed in cement mortar 1:6) including moulding, polishing the edges including dismantling all as specified and directed
61M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement.complete all as specified and as directed.
62M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and directed.
63S & F ceramic counter top wash hand Basin Glossy finishes, size 22x16x8 inch size including CP waste coulping, PVC connection 450 mm long, waste pipe and removing the exisitng Basin, cutting for and pinning ends of brackets or erecting stand complete all as specified.
64S & F 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipes or connections including necessary packing union and cap.
65S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality, mounted on 6 mm thick AC plain building board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers all complete as specified and as directed.
66S&F 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed.
67S & F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified and directed
68S&F fancy type pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore.
69S&F in repair 15 mm bore angle cock CP with flage complete all as specified and direcrted
70S&F swivel shower of CP with shower arm 150 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed (Make : ESSCO/Marc/Cera).
71S&F Bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. (Make : ESSCO/Marc/Cera).
72S&F stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. (Make : ESSCO/Marc/Cera).
73S&F for brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges.
74S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard and railing 60 cm long.
75S & F Stainless steel Soap dish, of approximate size 125mm complete all as specified and directed.
76S&F in repair CP towel ring complete all as specified and directed.
77S& F in repair for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
78S & F in repair 40mm (HDPE) of pressure rating 6 Kg/f/CM2 fixed complete to walls ceilings or in floors etc
79M&L for salt-glazed stoneware gully traps, square or round mouthed, type `P' 150x100mm
80S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
81S&F 110mm dia PVC bends of any radius acess door.
82S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door.
83Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawing complete all as Specified.
84S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as Specified.
85S&F 100 mm butt hinges stainless steel complete all as specified and directed.
86S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified and directed.
87S&F aluminium handles 125 mm size cast type anodised complete all as Specified.
88S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete.
89S&F 150 mm dia oval shape brass handle cromium plated fancy type polished bright finish
90S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed.
91S&F 12mm thick toughened or tampered glass (tuffen glass) thermal and chemical treated with heavy strength of fine polished edge as in doors/partition etc, with SS long body handle, pivots and locking arrangements of heavy duty accessories. It made from annealed glass via a thermal tempering process and toughening process. The glass compressive strength should be minimum 69 mps itching and cluster work as per sample kept in GE's office complete all as specified and directed by manufacturer's instruction and Engineer-In-Charge.
92S&F Double action floor spring hydraulically regulated made up of min 1.25mm thick stainless steel foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for toughen glass shutters complete.
93M & L Cement concrete type C2 1:3:6 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified
94M&L cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight including necessary form work and complete all as specified.
95M&L for PCC type B1, (1:2:4) using 20mm graded stone aggregate as in saucer drain and other similar works as in roof kerb,coping,padding etc, complete all as specified and directed.
96Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as specified and directed.
97M&L for rendering 10mm thick in CM 1:4 on roof suraces with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and directed.
98M&L for laying of APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) removing and Cleaning existing damaged APP membrane from roof surface and clean all cement mortar and vegitation, plants with roots properly.(b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per litere at 25 degree centigrade on prepared surface.(c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch application with 10cm side laps and 15cm end lap over hot bitumen 85/25 grade @ 1.2 Kg/Sqm overbituminous primer before Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e) Top of membrane shall be provide with solar reflective bituminous aluminum paint as prescribed by manufacture of membrane.
99M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof padding, string courses copings or as floors.
100M&L for PCC 1:5:10 ,type E-2 using 40mm graded crushed stone aggregate as in sub base and mass conc
101M&L for providing and laying 60mm thick factory made chamfered concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks,, lawns, drive ways or light traffic parking etc of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
102S&F Stainless steel basket (plain) of size 50cmx37cmx10cm made of 4mm thick S.S. wire approved quality with suitable arrangement for fixing Telescope basket (channel) 11/25 inch length two way extruded MS galvanised over rollers of approved Make
103S&F Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm made of 4mm thick S.S. wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved Make
104S&F Stainless steel plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm thick S.S wire aproved quality with suitable arrangement for fixing Telescope basket (channel) 18//25 inch length two way extruded MS galvanised over rollers of approved make.
105S&F Stainless steel partition basket of size 50cmx37cmx16cm made of 4mm thick S.S. wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extrude MS galvanised over rollers of approved make.
106S&F Stainless steel cutlary basket of size 50cmx37cmx10cm made of 4mm thick S.S. wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (Channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make.
107S&F Stainless steel basket (plain) of size 50cmx37cmx16cm made of 4mm thick S.S wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make.
108S&F Stainless steel bottol full out of size 50cmx40cmx16 cm in two tier made of 4mm thick S.S wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make.
109S&F Telescope basket/drawar (channel) 18/25 inch length extruded MS galvanised over rollers of approved make
110Mild steel angle iron posts and struts, MS flat iron fillet securing chain link fencing confirming to FE-290 E-165 as in fencing including cutting tops for required shape, drilling holes,bolting, notching for wire including all necessary drilling of similar work, complete all as specified and directed.
111M&L, preparation of new surface, priming with red oxide / zinc chromate and two coats of synthetic enamel (ordinary tint) painting to steel and iron surface of any description over 10cm in width or girth not otherwise described.
112Supply only Chain link fencing including wires, mesh of size 50x50mm, weight not less than 3.0 Kg/Sqm confirming to IS, type standards rails, straining bolts etc including provision of binding wire, complete all as specified and directed.
113Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and directed.
114Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
115S & F in Repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc.as directed (each line wire to be measured).
116S&F MS screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other, or screwed both ends, each screwed end to be fitting with washer and one hexagonal or square nut n.exc. 5cm long and dia of shank 8 to 10 mm etc.
117Material & labour for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for up to required module etc complete and making good to the disturbed surfaces to match the existing complete all as specified and directed for for One light / bell point controlled by one, one way switch 06 Amps
118All as per above Item No 117 here-in-before but one Ceiling / exhaust fan point controlled by one, one way switch 5/6 Amps
119All as per above Item No 117 here-in-before but one 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 06 Amps switch
120All as per above item No Item No 117 here-in-before but one 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch
121All as per above Item No 117 here-in-before but one 5 pin, 15 Amps socket outlet point on independent board 2.5 sqmm nominal cross sectional area controlled by one, one way 15 Amps switch
122All as per above Item No 117 here-in-before but with point wiring 4 Sqmm single core FRLS cables and earth continuity wire of 4 Sqmm single core FRLS cable for one 3 pin, 15/16 Amps socket outlet point on independent board controlled by one, one way 15/16 Amps switch
123S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete all as specified & directed
124S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete
125S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete
126S&F modular socket outlet 02 in 01, 05 pin, 6/16 Amps, 02 module with shutter complete
127S&F ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete
128S&F surface mounting LED integrated aluminium housing batten luminaire not less than 20 W, 4 feet fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V and all accessories pre-wired including connecting up with copper conductor wire of suitable size with connector block complete.
129S&F in surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete
130S&F surface mounted LED building security light fitting in high pressure die cast aluminium housing not less than 35 watt fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V including light grade GI tube mounting size 40MM bracket of suitable size & length, bend to shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete and one coat of primer and one coat of synthetic enamel paint after coating of primer on GI bracket and pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core complete all as specified and as directed.
131Supply and fixing of exhaust fan, steel body, AC, single phase, 230 V of size 300mm sweep with blades, frame & louver having 1400 RPM speed, 1600 CMH and including making of holes of suitable size complete all as specified and as directed.
132Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, including electronic fan regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete .
133Supply and fix electric water heater, storage type 50 ltrs capacity, BEE star rated, vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adapter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode having adustable knobe for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure having heating element 2 KW and minium two year warranty on product, minimum three years on heating element complete all as specified and as directed.
134S&F sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 'C' curve, 240 Volt complete
135Supply and laying or fixing or passing through pipe/on wall of 1100V grade, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 16 sqmm 2 core nominal cross section Fixed on wall/roof/duct complete
136M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls all as specified & directed.
137S&F MCB DB 8 Way, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs and making fully covered entry of cable by good quality PVC conduit up to 2 mtr making good to the disturbed surface and DB should be fixed on wooden frame in alignment clamp properly as per requirement on site complete all as specified and directed by Engineer in charge.
138Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning by using suitable copper lugs complete:-
139SP 5 To 32 AMP
140SPN/DP 40 to 63 AMP
141TP 40 AMP
142S&F sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 415 volts, metal double door suitable for MCCB 100 amps as incomer and MCB SP as outgoing along with cable end box for above DB and flush to wall including all cutting etc in wall complete as directed. (Note :- MCCB & MCB SP will be measured seperately)
143S&F MCCB 100 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete
144S&F Industrial type TPN enclosure with a three pin and neutral and earth plug and socket complete with and including 32 Amps MCB, four pole, AC, 415 volts and flush to wall including all cuttings & chases etc in wall complete as directed.
145M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete.(Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.)
146Supply & fix heavy duty high pressure portable type Car Washer complete with in-line filter, pressure gauge, valve spanner, V- belt, pulley mounted on wheeled plateform duly enclosed in sheet metal enclosure having following specifications :(a) Working Pressure - 550 PSI(b) Discharge - 300 Gln/Hr(c) No of Nozzles - 01 Trigger Gun(d) Motor rating - 3 HP, Single Phase, 1440 RPM(e) Standard Pipe length - 10 mtr
147Supply & fix A Direct On-Line (DOL) starter connects a 3-phase industrial induction motor directly to the full 415V supply voltage to deliver immediate full starting torque. Key Components of a DOL Starter : MCCB or Fuses : Provides critical short-circuit protection for the incoming power line.Magnetic Contactor: An electromagnetic switch controlled by push buttons to turn the motor ON and OFF.Thermal Overload Relay (OLR): Monitors current draw and trips the circuit if the continuous duty motor overheats or draws excessive current.
148Supply and laying or fixing or passing through pipe in repair of 1100V grade, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 10 sqmm 2 core nominal cross section complete
149S&F Industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB SPN, AC, 230 volts of 63 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all as complete.
150Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft soil & getting out including levelling of bottom surface to required level complete
151Returning filling , including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete
152Removing excavated material /soil from site to a distance not exc 50mtr away and depositing where directed and level not exc 1.5mtr from the starting point complete
153Sub class ‘B bricks, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and as directed
154Sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.
155Cutting of existing GI pipe any size including necessary tools, labour, dewatering and making the pipe ready for further connection as required at site complete all as specified & directed
156Supply & Laying GI pipe 20 mm dia bore, medium grade ISI marked including all fittings complete
157S&F heavy duty brass/gun metal Ball valve, 20 mm bore with handle head, screwed both ends for iron pipe, ISI Marked complete Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58612420
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 47.92 Lakhs
LAST DATE 10-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of 23X Water Tank 1000 Ltr Capacity At Mes Bldg No.P-08,P-09,P-10,P-14,P-15 & P-106 At Unit Location 5 Sikh Li, , Shed For Cook House Building Np P-16 At Unit Loction Of 5 Sikh Li, Laundry Shop At Unit Location Of 5 Sikh Li, Comman Washing & Bath Area At Cod, Vehicale Repair Cum Washing Ramp Near Mt Area Of 505 Abw And Addn/ Altrn To Kitchen Roof Treatment, Shed, Path, Fencing And Other Connected Items In Bldg No P-3 At Kirby Place Under Ge (North) Delhi Cantt -10
Basic Detail
Tender No GE/NORTH-140/2026-27
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 19 Nov 2026
Submission Date 10 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 47.92 Lakhs
Tender Fee 500
EMD 85840
Exemption Available
Document List
1b177680-b2e6-472b-9957-d9f254851637.html
BOQ_896946.xls
Gen140.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
html

1b177680-b2e6-472b-9957-d9f254851637.html

xls

BOQ_896946.xls

pdf

Gen140.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender