Tender For Mechanical Construction Of Master Service Corridor Of Project Inrp, Nrb, Barc Tarapur
Tender Value
251.20 Crore
Estimated cost
Bid Submission
17 Dec 2026
26 days left
EMD
2.61 Crore
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palghar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mechanical Construction Of Master Service Corridor Of Project Inrp, Nrb, Barc Tarapur
BOQ
| Sl. No. | Item Description |
| 1 | Structural Work consisting of MS Rolled and Tubular Products:[Refer Chapter-1 of technical specifications for Item No. 1.01 to Item No. 1.04] |
| 2 | Supply, cutting, welding, Fabrication, Bolting, Erection of Structural Steel of MS rolled single / built-up sections conforming to IS 2062 for staircase, edge angles, gratings, column, beams, cross members, railings, handrails, ladders from box column sections, built-up sections, channels, angles, M.S Plain Plates and chequered Plates , connection plates, etc., including applying a priming coat of approved steel primer etc complete all as per Technical Specifications, drawings and as directed by the Engineer in charge. |
| 3 | Providing, supplying, cutting, welding, fabricating, bolting, hoisting and fixing in position structural steel members like trusses, columns/beams, etc. using MS ( IS 2062) hollow / square / rectangular tubular sections including applying a priming coat of approved steel primer of approved make all as per specifications, drawings and as directed by the Engineer in charge |
| 4 | Providing and Painting with Epoxy PU paint using 2 coats of (120 Micron dry film thickness) Epoxy PU high build coating as finishing coat over a priming coat of EPILUX-13 High Build primer of 50 micron thickness over steel surfaces at all locations prepared and applied as per technical specifications including preparation of surface by cleaning with wire brush and rubbing, scraping , applying sand paper , making free of Rust, dust, dirt etc. filling the holes, joint, cracks if any using epoxy putty complete. all as per manufacturers technical data and as directed at site to achieve minimum overall dry Film thickness of 170 micron (50 Micron primer Coat + 120 micron finishing Coat). |
| 5 | MS Rack Structural modification work including cutting & re-welding of existing MS Structure, fabrication, erection, testing, installation and PU epoxy painting as per detail technical specifications [Refer Chapter 1], drawings and as directed by the Engineer in charge. |
| 6 | Manufacture, inspection, factory testing, procurement and delivery of ERW Carbon Steel Pipe as per IS 1239 Class Heavy or ASTM A 53 grade B Sch 40 or ASTM A 106 grade B(as per applicable services specified in chapter-2 of technical specification) to site as per approved procedure and technical specification etc.( Item No. 2.01 to Item No. 2.06) [Refer Chapter-2 of technical specifications for item No. 2.01 to item No. 2.91] |
| 7 | NB 25 |
| 8 | NB 40 |
| 9 | NB 50 |
| 10 | NB 80 |
| 11 | NB 100 |
| 12 | NB 150 |
| 13 | Manufacture, inspection, factory testing, procurement and delivery of ERW Carbon Steel Pipe as per IS 3589 with minimum standard thickness of 9.52 mm or ASTM A 53 grade B or ASTM A 106 grade B(as per applicable services specified in chapter-2 of technical specification) to site as per approved procedure and technical specification etc. .( Item No. 2.08 to Item No. 2.15) |
| 14 | NB 200 Sch 40 |
| 15 | NB 250 Sch 40 |
| 16 | NB 300 Sch Std |
| 17 | NB 350 Sch Std |
| 18 | NB 400 Sch Std |
| 19 | NB 500 Sch Std |
| 20 | NB 600 Sch Std |
| 21 | NB 700 Sch Std |
| 22 | Manufacture, inspection, factory testing, procurement and delivery of pipe fittings, material as per ASTM A 234, Gr. WPB, and dimension as per ASME B 16.9 BW to site as per approved procedure and technical specification etc..( Item No. 2.17 to Item No. 2.76) |
| 23 | Elbows .( Item No. 2.18 to Item No. 2.31) |
| 24 | 25NB Sch 40 |
| 25 | 40NB Sch 40 |
| 26 | 50NB Sch 40 |
| 27 | 80NB Sch 40 |
| 28 | 100NB Sch 40 |
| 29 | 150NB Sch 40 |
| 30 | 200NB Sch 40 |
| 31 | 250NB Sch 40 |
| 32 | 300NB Sch Std |
| 33 | 350NB Sch std |
| 34 | 400NB Sch std |
| 35 | 500NB Sch std. |
| 36 | 600NB Sch std |
| 37 | 700NB Sch std |
| 38 | Tees.( Item No. 2.33 to Item No. 2.51) |
| 39 | 25x25x25NB Sch 40 |
| 40 | 40x40x25NB Sch 40 |
| 41 | 100x100x50NB Sch 40 |
| 42 | 100x100x100NB Sch 40 |
| 43 | 150x150x80NB Sch 40 |
| 44 | 150x150x100NB Sch 40 |
| 45 | 150x150x150NB Sch 40 |
| 46 | 200x200x100NB Sch 40 |
| 47 | 200x200x150NB Sch 40 |
| 48 | 200x200x200NB Sch 40 |
| 49 | 300x300x200NB Sch Std. |
| 50 | 300x300x300NB Sch Std. |
| 51 | 400x400x150NB Sch Std. |
| 52 | 400x400x200NB Sch Std. |
| 53 | 400x400x250NB Sch Std. |
| 54 | 400x400x400NB Sch Std. |
| 55 | 500x500x500NB Sch Std. |
| 56 | 600x600x600NB Sch Std. |
| 57 | 700x700x700NB Sch Std. |
| 58 | Eccentric reducer( Item No. 2.53 to Item No. 2.72) |
| 59 | 40X25NB Sch 40 |
| 60 | 50X25NB Sch 40 |
| 61 | 50X40NB Sch 40 |
| 62 | 80X40NB Sch 40 |
| 63 | 100x50 NB Sch 40 |
| 64 | 100x80 NB Sch 40 |
| 65 | 150x80 NB Sch 40 |
| 66 | 150x100 NB Sch 40 |
| 67 | 200x100 NB Sch 40 |
| 68 | 200x150 NB Sch 40 |
| 69 | 300x150 NB Sch 40 |
| 70 | 300x200 NB Sch 40 |
| 71 | 300x250 NB Sch Std |
| 72 | 400x200 NB Sch std |
| 73 | 400x250 NB Sch std |
| 74 | 500x350 NB Sch std |
| 75 | 500x400 NB Sch std |
| 76 | 600x500 NB Sch std |
| 77 | 700x500 NB Sch std |
| 78 | 700x600 NB Sch std |
| 79 | Cap ( Item No. 2.74 to Item No. 2.76) |
| 80 | 100 NB |
| 81 | 150 NB |
| 82 | 400 NB |
| 83 | Manufacture, inspection, factory testing, procurement and delivery of coupling material as per ASTM A 105, and dimension as per ASME B 16.9 BW to site as per approved procedure and technical specification etc. of Size 25NB and Class 3000# |
| 84 | Supply, fabrication and installation of Steam Trap and Drain units of 25NB size as per technical specifications and drawings. Each unit shall includes supply and installation of 03 Nos MANUAL Operated GATE-VALVE as per ASME B16.34, PN 1.6, BRONZE, ASTM B 62 along with gasket, flanges and nut-bolts;01 Nos MANUAL Operated GLOBE-VALVE SC NPT(F) ASME B16.34, PN 1.6,BRONZE ASTM B 62 along with gasket, flanges and nut-bolts; 01 Nos STEAM TRAP,THERMODYNAMIC TYPE,SW,150#,ASTM A743 Gr.CA40;01 Nos COUPLING,HALF,SW,ASME B16.11,3000#,SA 105. |
| 85 | Erection of MS Piping: Taking physical measurement, Preparation of site drawings, handling, transportation and cleaning of pipes (inside & outside), cutting, laying & erection on supports as per drawing, submission of as-built drawings, return of balance material to INRP store, Hydro-testing/Pneumatic Testing of piping system along with fittings as per technical specification, drawings and directions of EIC. |
| 86 | Welding of MS Piping: Butt/socket/nozzle/fillet/mitre Welding of Carbon Steel (C.S.) pipes & fittings etc. by SMAW/GTAW process using E6013/E70S-2 & 100% LP examination of root and final pass of each weld as per technical specification, drawings and as directed by EIC. |
| 87 | Insulation of Chilled Water Line:Taking physical measuremet, Supply and installation of a multi-layer insulation system (10mm Aerogel + FR PIR + Vapour Barrier + Aluminium Cladding bonded with SS 304 bands) for chilled water piping, valves and fittings as per technical specifications drawings, and as directed by EIC.( Item No. 2.82 to Item No. 2.86) |
| 88 | 80 NB-100NB |
| 89 | 150NB-250NB |
| 90 | 400NB |
| 91 | 500NB |
| 92 | 600NB |
| 93 | Insulation of Steam line:Taking physical measurement, Supply and installation of a multi-layer insulation system (heat resistant paint + 10mm Aerogel with SS 304 wire netting+ Rockwool SS 304 wire netting+ Aluminium Cladding bonded with SS 304 bands) for steam piping, valves, and fittings as per technical specifications, drawings and as directed by EIC.( Item No. 2.88 to Item No. 2.91) |
| 94 | 50NB and Below |
| 95 | 80NB-100NB |
| 96 | 250NB |
| 97 | 400NB |
| 98 | Supply of SS Pipes: Supply / Manufacture, Inspection and Testing at supplier’s works , Marking, Packing, Safe Delivery at INRP site/Stores, BARC Tarapur and Guarantee of supplier / Manufacturer for Austenitic Stainless Steel Pipe conforming to ASTM A-312 TP 304L as per specification enclosed. ( Item No. 3.01 to Item No. 3.04 for supply of pipes) [Refer Chapter-3 of technical specifications for item No. 3.01 to item No. 3.08] |
| 99 | Size: 4”/100 NB, Schedule 10S Welded |
| 100 | Size: 4”/100 NB, Schedule 10S Seamless |
| 101 | Size: 6”/150 NB, Schedule 10S Seamless |
| 102 | Size: 8”/200 NB, Schedule 10S Welded |
| 103 | Erection of SS Piping:Taking delivery of FIM (pipes), transportation to site and erection of the same as per the approved piping layout drawing and technical specification. The work includes collection of FIM from department store, taking physical measurement, Preparation of site drawings, handling, transportation and testing of material as and when required, pickling and passivation of pipes and pipe fittings, bending, cutting, laying & Erection on supports, submission of as-built drawings, return of balance FIM/scrap, Hydro-testing/Pneumatic testing of piping along with fittings as per drawing, technical specifications and as per directions of EIC. |
| 104 | Butt Welding of SS Piping:Butt/Nozzle/Miter welding of SS304L pipes, fittings, etc. by GTAW process using ER 308L filler wires with argon purging and shielding including LP examination on root and final pass of joints along with supply of all consumables and filler wires as per technical specifications, drawings and as directions of EIC. |
| 105 | Fillet/Flange welding of SS304L pipes, fittings, etc. by GTAW process using ER 308L filler wire with argon purging/shielding including LP examination (root and final) of pipes along with supply of all consumables and material as per technical specifications, drawings and as directions of EIC. |
| 106 | Radiography inspection of Butt/Miter Joints using X-ray /Gamma ray source for SS/MS piping at various elevations including arrangement of Radiography equipment/camera, tools, darkroom, pits at site, supply of all consumables like films, chemicals etc. to carryout radiography as per approved procedure and technical specifications. Re-shoots, retake, repair and 2% audit radiography joints will not be counted for measurement. The contractor shall provide digitised radiographs as well as hard copy along with other inspection reports. |
| 107 | Fabrication & Erection of SS Duct and Transformation pieces (Circular to Rectangular and vice versa): Collection and handling of Departmental FIM (SS 304L, 3 mm thick coils, 6 mm SS plate), preparation of fabrication/erection drawings, De-coiling of issued FIM, cleaning, cutting, forming, fit-up, manual or automated welding using GTAW/MIG technique, DPT, installation and complete erection of SS Ducts/ Transformation pieces on supports as per approved drawings, technical specifications and direction of EIC. The scope also includes fabrication, erection, welding of SS 304L pad plates, SS clamps and shim plates as per Technical Specifications, drawings and directions of EIC. [Refer Chapter-4 of technical specifications] |
| 108 | Supply, Fabrication and Erection of MS Supports: Structural Steel Works of MS rolled single / built-up sections conforming to IS 2062 for Saddle Supports/Shoe supports/Sliding Support for Ducts and Pipes, Stiffeners for Ducts, Clamps for pipe supports. The scope includes supplying, cutting, welding, bending, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge [Refer Chapter-5 of technical specifications] |
| 109 | Electrical Works [Refer Chapter-6 of technical specifications for item No. 6.01 to item No. 6.75]) |
| 110 | Cable trays (Item No. 6.02 to item No.6.08) |
| 111 | SITC of Hot dip Galvanised Iron ladder type cable tray fabricated out of 2 mm thick sheet steel having 450 mm width, side channel of 100 mm, rungs spaced at 250 mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long grove for adjustment with solid cover 1.2 mm thick and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per attached tender drawings and technical specification. |
| 112 | Supply and Installation of Hot dip Galvanised ladder type cable tray fabricated out of 2 mm thick sheet steel having 150 mm width, side channel of 100 mm, rungs spaced at 250 mm, single length not less than 2.5 mtr with two coupling/joint plates per tray length having one long grove for adjustment with solid cover 1.2 mm thick and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per attached tender drawings and technical specification. |
| 113 | Supply and Installation of Hot dip Galvanised perforated type cable tray fabricated out of 2 mm thick sheet steel having 150 mm width, side channel of 100 mm, cross perforation not more than 17.5%, single length not less than 2.5 mtr with two coupling/joint plates per tray length having one long grove for adjustment with solid cover 1.2 mm thick and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per attached tender drawings and technical specification. |
| 114 | Supply and Installation of Hot dip Galvanised ladder type cable tray fabricated out of 2 mm thick sheet steel having 600 mm width, side channel of 100 mm, rungs spaced at 250 mm, single length not less than 2.5 mtr with two coupling/joint plates per tray length having one long grove for adjustment with solid cover 1.2 mm thick and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per attached tender drawings and technical specification. |
| 115 | Supply and Installation of Hot dip Galvanised perforated type cable tray fabricated out of 2 mm thick sheet steel having 450 mm width, side channel of 100 mm, cross perforation not more than 17.5%, single length not less than 2.5 mtr with two coupling/joint plates per tray length having one long grove for adjustment with solid cover 1.2 mm thick and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per attached tender drawings and technical specification. |
| 116 | Supply and Installation of Hot dip Galvanised perforated type cable tray fabricated out of 2 mm thick sheet steel having 300 mm width, side channel of 100 mm, cross perforation not more than 17.5%, single length not less than 2.5 mtr with two coupling/joint plates per tray length having one long grove for adjustment with solid cover 1.2 mm thick and all suitable accessories ( Couplers / Tees / bends / cross member / connectors, nuts and bolts ) as per attached tender drawings and technical specification. |
| 117 | SITC of 25mm x 6mm GI strip along trays using suitable size GI saddel/clamp including interconnection of different tier cable trays, hardwares, etc as per tender technical specifications . |
| 118 | POWER CABLES(Item No. 6.10 to item No.6.60) |
| 119 | 6.35/11kV( E ), 3C x 400 Sq. mm, XLPE insulated Aluminium Conductor cable suitable for 6.6kV resistance earthed system as per IS 7098( Part - 2) and detailed tender technical specifications. (item No. 6.11 & 6.12) |
| 120 | Supply |
| 121 | Underground Laying normally at a depth of 1mtr from ground level as per tender drawings and technical specifications. The scope also includes collcetion and transportation of FIM cables from INRP stores. |
| 122 | Supply and Making of straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for underground 6.35/11kV( E ), 3C x 400 Sq. mm, XLPE insulated Aluminium Conductor cable. |
| 123 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Power cable (A2XWY (P)) of size 3.5C x 400 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 124 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Power cable (A2XWY (P)) of size 3.5C x 150 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 125 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Power cable (A2XWY (P)) of size 3.5C x 120 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 126 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Power cable (A2XWY (P)) of size 4C x 25 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 127 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Power cable (A2XWY (P)) of size 2C x 240 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 128 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Power cable (2XWY (P)) of size 2C x 50 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 129 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Power cable (2XWY (P)) of size 2C x 35 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 130 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Power cable (2XWY (P)) of size 2C x 16 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 131 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Power cable (2XWY (P)) of size 2C x 10 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 132 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Power cable (2XWY (P)) of size 2C x 4 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 133 | Supply, Underground Laying normally at a depth of 800 mm from ground level of Power cable (A2XWY (P)) of size 3.5C x 400 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988 and as per tender drawings and technical specifications |
| 134 | Supply, Underground Laying normally at a depth of 800 mm from ground level of Power cable (A2XWY (P)) of size 3.5C x 240 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988 and as per tender drawings and technical specifications |
| 135 | Supply, Underground Laying normally at a depth of 800 mm from ground level of Power cable (A2XWY (P)) of size 3.5C x 185 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988 and as per tender drawings and technical specifications |
| 136 | Supply, Underground Laying normally at a depth of 800 mm from ground level of Power cable (A2XWY (P)) of size 3.5C x 150 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988 and as per tender drawings and technical specifications |
| 137 | Supply, Underground Laying normally at a depth of 800 mm from ground level of Power cable (A2XWY (P)) of size 3.5C x 120 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988 and as per tender drawings and technical specifications |
| 138 | Supply, Underground Laying normally at a depth of 800 mm from ground level Power cable (2XWY (P)) of size 4C x 25 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 139 | Supply, Underground Laying normally at a depth of 800 mm from ground level Power cable (2XWY (P)) of size 4C x 6 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 140 | Supply, Underground Laying normally at a depth of 800 mm from ground level Power cable (2XWY (P)) of size 2C x 10 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 141 | Supply, Underground Laying normally at a depth of 800 mm from ground level Power cable (A2XWY (P)) of size 2C x 185 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 142 | Supply, Underground Laying normally at a depth of 800 mm from ground level Power cable (2XWY (P)) of size 2C x 35 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 143 | Supply, Underground Laying normally at a depth of 800 mm from ground level Power cable (2XWY (P)) of size 2C x 50 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 144 | Supply, Underground Laying normally at a depth of 800 mm from ground level Power cable (2XWY (P)) of size 2C x 16 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 145 | Supply, Underground Laying normally at a depth of 800 mm from ground level of Power cable (A2XWY (P)) of size 2C x 240 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988 and as per tender drawings and technical specifications |
| 146 | Supply, Underground Laying normally at a depth of 800 mm from ground level of Power cable (A2XWY (P)) of size 2C x 300 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988 and as per tender drawings and technical specifications |
| 147 | Supply, Underground Laying normally at a depth of 800 mm from ground level of Power cable (A2XWY (P)) of size 2C x 4 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988 and as per tender drawings and technical specifications |
| 148 | Supply, Underground Laying normally at a depth of 800 mm from ground level of Power cable (A2XWY (P)) of size 2C x 6 Sq.mm, Aluminium conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988 and as per tender drawings and technical specifications |
| 149 | Supply and Making of straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for outdoor and underground of following size of cables of 1.1 kV grade (Item No. 6.41 to item No.6.60) |
| 150 | 3.5C X 400 Sqmm, A2XWY |
| 151 | 3.5C X 300 Sqmm, A2XWY |
| 152 | 3.5C X 240 Sqmm, A2XWY |
| 153 | 3.5C X 185 Sqmm, A2XWY |
| 154 | 3.5C X 150 Sqmm, A2XWY |
| 155 | 3.5C X 120 Sqmm, A2XWY |
| 156 | 4C X 50 Sqmm, 2XWY |
| 157 | 4C X 25 Sqmm, 2XWY |
| 158 | 4C X 6 Sqmm, 2XWY |
| 159 | 2C X 10 Sqmm, 2XWY |
| 160 | 2C X 185 Sqmm, A2XWY |
| 161 | 2C X 35 Sqmm, 2XWY |
| 162 | 2C X 50 Sqmm, 2XWY |
| 163 | 2C X 16 Sqmm, 2XWY |
| 164 | 2C X 240 Sqmm, A2XWY |
| 165 | 2C X 300 Sqmm, A2XWY |
| 166 | 2C X 4 Sqmm, 2XWY |
| 167 | 2C X 6 Sqmm, 2XWY |
| 168 | 5C x 2.5 Sq.mm, 2XWY |
| 169 | 10C x 2.5 Sq.mm, 2XWY |
| 170 | CONTROL CABLES(Item No. 6.62 to item No.6.65) |
| 171 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Control cable (2XWY (P)) of size 5C x 2.5 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 172 | Supply, Laying and Dressing over cable trays at a height of 6 mtrs (approx) of Control cable (2XWY (P)) of size 10C x 2.5 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath FRLSH of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 173 | Supply, Underground Laying normally at a depth of 800 mm from ground level Control cable (2XWY (P)) of size 5C x 2.5 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 174 | Supply, Underground Laying normally at a depth of 800 mm from ground level Control cable (2XWY (P)) of size 10C x 2.5 Sq.mm, Copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type ST - 2 inner sheath and outer sheath of extruded PVC type ST2 (P) and ST2 (Y), of 1.1 kV grade as per IS 7098 (Part - 1) 1988. |
| 175 | Fire Barrier(Item No. 6.67 to item No.6.69) |
| 176 | Supply and fixing of Water based fire stop/fire barrier with min 3 hr fire rating for cable opening and suitable for retrofitting along with fire sealant,making frames, finishing, etc as required |
| 177 | Making the opening in brick masonry for door / window / clear story opening including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface including disposal of mulba/rubbish to the nearest dumping ground. |
| 178 | Supply and Fixing of Fire retardent cable coating paint with min 30min fire rating for horizontal and vertical cable runs |
| 179 | Excavation and UG Cable Dressing(Item No. 6.71 to item No.6.75) |
| 180 | Excavation in all type of soils , normally to a depth of 1000 mm below ground level, back filling, dewatering (If necessary), consolidation shoring, disposal of excess earth and as per the attached tender drawings and technical specification. |
| 181 | Supply and Fixing of Cable Route Markers with Tagging arrangement as per tender technical specification. |
| 182 | Supply, laying and fixing of 300 mm dia RCC pipe NP2 class( light duty ), inclusive of road cutting of width 800mm and depth 1000 mm complete with RCC collars, jointing with cement mortar 1:2( 1 cement: 2 fine sand ), 100mm thick encasing the pipe with concrete of 1:2:4 grade, backfilling and concreting (1:2:4 ) with M30 grade and as per the attached tender drawings and technical specification. |
| 183 | Supply, laying and fixing of solid concrete bricks (230x110x70mm) and crush sand bedding cover of min 75mm thickness around the cables laid underground and as per the attached underground Cable Route Section tender drawings and technical specifications. (1 Lot : 30000 Bricks and 55 m3 Crush sand) |
| 184 | Supply and Fixing of 500 mm x 250 mm x 50 mm RCC tiles as per the attached drawing and detailed technical specification |
| 185 | Supply, laying, testing of Instrumentation cables (item No. 7.01 to Item No. 7.34) |
| 186 | Supply of 20 Pair, 0.5 mm dia copper conductor , Jelly filled, Armoured, Telephone Cable as per attached specifications. |
| 187 | Laying of 20 Pair, 0.5 mm dia copper conductor , Jelly filled, Armoured, Telephone Cable as per attached specifications. |
| 188 | Supply of 50 Pair, 0.5 mm dia copper conductor , Jelly filled, Armoured, Telephone Cable as per attached specifications. |
| 189 | laying of 50 Pair, 0.5 mm dia copper conductor , Jelly filled, Armoured, Telephone Cable as per attached specifications. |
| 190 | Supply of 100 Pair, 0.5 mm dia copper conductor , Jelly filled, Armoured, Telephone Cable as per attached specifications. |
| 191 | Laying of 100 Pair, 0.5 mm dia copper conductor , Jelly filled, Armoured, Telephone Cable as per attached specifications. |
| 192 | Supply of 200 Pair, 0.5 mm dia copper conductor , Jelly filled, Armoured, Telephone Cable as per attached specifications. |
| 193 | Laying of 200 Pair, 0.5 mm dia copper conductor , Jelly filled, Armoured, Telephone Cable as per attached specifications. |
| 194 | Supply of 2 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 195 | Laying of 2 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 196 | Supply of 4 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 197 | Laying of 4 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 198 | Supply of 5 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 199 | Laying of 5 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 200 | Supply of 10 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 201 | Laying of 10 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 202 | Supply of 20 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 203 | Laying of 20 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 204 | Supply of 25 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 205 | Laying of 25 pair, 1.5 Sq. mm, Flexible, Overall Aluminum Mylar screen with drain wire, Copper, Multistranded conductor, armoured, FRLS PVC Sheathed (Inner and Outer) as per attached specifications |
| 206 | Supply of 23AWG armoured UTP cable as per attached specifications. |
| 207 | Laying of 23AWG armoured UTP cable as per attached specifications. |
| 208 | Supply of 6 Core armoured single mode (9/125 micro meter) Single tube loosely buffered Optical fiber cable as per attached specifications. |
| 209 | Laying of 6 Core armoured single mode (9/125 micro meter) Single tube loosely buffered Optical fiber cable as per attached specifications. |
| 210 | Supply of 40mm HDPE pipe as per attached specifications. |
| 211 | Laying of 40mm HDPE pipe as per attached specifications. |
| 212 | Supply of 24-core Single Mode (9/125 um) multi-tube loosely buffered armoured Fiber optic cable |
| 213 | Laying, dressing and testing of 24-core Single Mode (9/125 um) multi-tube loosely buffered armoured Fiber optic cable |
| 214 | Supply of Outdoor type 24 core FOC jointing kit suitable for splicing and fixing of 24 core armoured fiber optic cable along with OTDR reports |
| 215 | Installation of Outdoor type 24 core FOC jointing kit suitable for splicing and fixing of 24 core armoured fiber optic cable along with OTDR reports |
| 216 | Splicing of fiber optic cores and terminations along with OTDR reports |
| 217 | Installation of 9U wall mounted network racks along with all accessories(cable managers, patchpanels, etc.) |
| 218 | Installation of 42U floor mounted network racks along with all accessories(cable managers, patchpanels, etc.) |
| 219 | Installation of fully loaded drawout type LC type 24-port LIU fiber patch panel along with all accessories |
| 220 | Miscellaneous Civil Work (Item No. 8.01 to Item No. 8.08) |
| 221 | Earth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete and as directed by the Engineer-in-charge.From 0.00 to 1.50 m depth from average ground level |
| 222 | Labour charges for murum filling under floors of specified thick in layers of not exceeding 150 mm thickness including consolidation etc. complete (using murrum available at site) |
| 223 | Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specifications and drawings but excluding the cost of Form work shuttering, centering Complete at all levels |
| 224 | Providing and laying in position Reinforced Cement Concrete of Grade M-60 using 20mm maximum size aggregates and crushed sand of approved quality including weigh batching, mechanical mixing, transporting , placing, vibrating, including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications, at all levels and elevations |
| 225 | Providing , centering ,shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels and elevations |
| 226 | Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractorUsing TMT bars of specified grades confirming to IS 1786 (Latest). TMT bars to be supplied by vendors using virgin materials. |
| 227 | Supplying, Stacking and Laying of 150 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge |
| 228 | Providing and Fixing Mechanical Anchor Fastener including drilling in concrete as per requirement for fixing Eps or other structures as per specifications and drawings. With Threaded bolt with cone of Carbon steel strength 8.8, hot dip galvanized to min.50 µm; Sleeve of Carbon steel hot dip galvanized min. 50µm; Hexagon nut Steel grade 8, hot dip galvanized min. 50µm and Washer According to DIN 125-1, 140 HV, hot dip galvanized min. 50µm (item No. 8.09 to item No 8.10) |
| 229 | 16 MM diameter 200 mm Long |
| 230 | 20 mm diameter 200 mm Long |
| 231 | Third Party Inspection(TPI) Services :QA and QS Coverage on various systems during procurement and construction/fabrication stages of this said work at Constuction site i.e. INRP Tarapur and Across India including allied expenses. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysDec 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender