Tender For Construction Of Community Center Cum Bhog Ghar Near Mangala Mandir, W.No.17
Tender Value
10 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
10000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jharsuguda → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Center Cum Bhog Ghar Near Mangala Mandir, W.No.17
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation in hard soil with all leads and lifts including dressing and levelling the bed in layers not exceeding 0.3 m in depth including dewatering if necessary with cost of all labour and T&P work etc. Complete. |
| 2 | Supplying, filling in F&P with clean course good river sand including watering, ramming, poking & compacting & cost, conveyance royalties, taxes of all materials, labour, T&P etc. Complete |
| 3 | Cement concrete (1:4:8) with 40 mm size hand broken hard granite metal including all cost of materials, labour, conveyance, royalty, Tools and Plants water for curing etc. all complete,as per O.P.W.D. specification required for the work to finished items of work. |
| 4 | R.C.C work of M20 grade with 20 mm and down grade crusher broken hard granite chips including hosting and laying all cost of materials, labour, conveyance, royalty, Tools and Plants water for curing etc. all complete,as per O.P.W.D. specification required for the work to finished items of work. ( See Page no-50,Item no 4 of AoR-06) |
| 5 | Brick work with Flyash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in foundation and plinth. |
| 6 | Brick work with Flyash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Super Structure including all charges. |
| 7 | 12mm thick cement plaster in cement morter(1:6) including all cost, rayality, conveyance etc all complete |
| 8 | Labour for fixing G.C.I. Sheet 0.30mm thick in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. excluding cost of fitting(See Page no-125,Item no 32 of AoR-06)A) Roof |
| 9 | B)Ridges |
| 10 | Iron work wrought and put up in trusses and record racks |
| 11 | Iron work wrought and put up in grated doors, windows and cage latrines etc. complete as per the direction of engineer incharge |
| 12 | Painting two coats with approved paint on new wood/iron work |
| 13 | Providing M. S. Reinforcement for R.C.C. work including cutting, bending, binding & tying the grills & placing in position with cost of M. S. Rod and binding wire of 18 to 20 gauge including cost of all materials, labour, T&P etc. Complete. |
| 14 | Rigid and smooth centering and shuttering for CC works including false work and dismentalling then after casting including cost of materials complete in ground floor.A) Lintel |
| 15 | B) Plinth Beam |
| 16 | Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1(1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles (See Page no-89,Item no 16 of AoR-06) |
| 17 | Priming 1 coat with any approved Primer (wood) including cost of primer etc. complete (See Page no-93,Item no 1 of AoR-06) |
| 18 | Weather coat painting two coats with 100% Acrylic emulsion paint (1st. quality) exterior grade over a coat of water bond cement primer of approved make & shade manufactured by reputed manufacturer like (NEROLAC/ASIAN/BERGER/DULOX) or equivalent to make an ever finished surface in all floor and height with all scaffolding and staging charges including cost, conveyance & taxes of all materials labour & T&P etc. complete |
| 19 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade exculding cost of paint (For 10 Sqm.) (See Page no-99,Item no 20 of AoR-06) |
| 20 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, TSP etc. required for the complete in all respect. |
| 21 | Electric connections and fittings Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender