Power Boards / Undertakings / PSU Closing in 11 days TDR #58611363

Tender For Replacement Of Acsr Bare Conductor By Covered Conductor Acs 232 Sq.Mm In 33 Kv Chinimill To Majrashila Feeder Under Edsd Gadarpur Under Edd-Ii, Rudrapur Under The Head Of Capital (S.I.).( Rates Should Be Quoted Without Gst) (Gst Will Paid

Issued by Boards / Undertakings / PSU · Udam Singh Nagar, Uttarakhand
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Dec 2026
11 days left
EMD
4.21 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Udam Singh Nagar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Replacement Of Acsr Bare Conductor By Covered Conductor Acs 232 Sq.Mm In 33 Kv Chinimill To Majrashila Feeder Under Edsd Gadarpur Under Edd-Ii, Rudrapur Under The Head Of Capital (S.I.).( Rates Should Be Quoted Without Gst) (Gst Will Paid Extra)

BOQ

Name of Work:- Replacement of ACSR bare conductor by Covered Conductor ACS 232 Sq.MM in 33 KV Chinimill to Majrashila Feeder under EDSD Gadarpur under EDD-II, Rudrapur under the head of Capital (S.I.).( Rates Should be Quoted without GST) (GST will paid extra)
Sl. No. Item Description
1Annexure-A (LABOUR CHARGES)
2Chemical Earthing including digging of pit of size 2.5 Mtr depth and make hole of size 150 mm. Placing of earthing electrode (to be supplied by contractor), connecting the same with G.I. Strip (to be supplied by contractor) of size 35x6 mm for a minimum lenght 6 m. treatment of soil with highly condctive substance as per IS 30343 complete in all respect, result of earthing resistance to be recroded in M.B. before and after installation of earthing. The earth resistance after earthing should be less than 1 Ohm.
3Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESPO schedule and local approved drawing.
4Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work.
5Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual.
6Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8(1 cement:4 graded stone20 mm niminal size: 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESPO cnstruction manual
7Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.
8Painting of SP-55 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.
9Providing and fixing of Danger Board and number plate complete by providing clamps of M.S. Flat 50x6 mm and Nuts & Bolts, danger Boards of M.S. Sheet 2 mm Thick 11''x7'' size (Including cost of all material).
10Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 0-20 Km)
11Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 0-20 Km)
12Headload cartage of SP-55 Pole from road to site (distance 0-1 Km)
13Headload cartage of small material(distance 0-1 Km)
14Straightning of Tilted STP Poles as per direction of Engineer in charge.
15Back Cartage of Petty Material (Distance 0-20 Km)
16Fixing of 33 KV 90KN Tension Clamp with IPC
17Fixing of 33 KV Suspension Ties.
18Fixing of 33 KV IPC for CC to CC Conductor.
19Fixing of 33 KV IPC for CC to Bare Conductor.
20Fixing of 33 KV Mid Span Jointing Kit.
21Fixing of 33 KV Bimetalic lugs.
22Fixing of IPC with AL. Bail for Earthing.
23Back Head Load Cartage of Petty Material (Distance 0-1 Km)
24Laying Spreading & Sagging of Covered Conductor for 33 KV.
25Removing old conductor by opening Jumper.
26Annexure-B (SUPPLY ITEMS)(As per UPCL Norms)
27Supply of Holding Clamp for SP-55 with N/B
28Supply of 33 KV 90 KN Tension Clamp with BAIL & IPC
29Supply of 33 KV Suspension Ties on every Pin Insulator.
30Supply of 33 KV IPC for CC to CC Conn. in every sec.
31Supply of 33 KV IPC for CC to Bare Conn. both end.
32Supply of 33 KV mid span Jointing Kit
33Supply of 33 KV Biometalic crimping lugs.
34Supply of 33 KV IPC with Al. BAIL for Earthing.
35Supply of 33 KV Polymer Pin Insulator with Pin-D
36Supply of 33 KV Polymer Disk Insulator-D
37Supply of 33 KV ACS AL-59, 232 Sq.mm. Covered Conductor. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58611363
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 04-12-2026
Authority
Authority Name Uttarakhand Power Corporation Limited
Work Description Tender for Replacement Of Acsr Bare Conductor By Covered Conductor Acs 232 Sq.Mm In 33 Kv Chinimill To Majrashila Feeder Under Edsd Gadarpur Under Edd-Ii, Rudrapur Under The Head Of Capital (S.I.).( Rates Should Be Quoted Without Gst) (Gst Will Paid Extra)
Basic Detail
Tender No EDC(USN)88/2026-27
Bidding Type Tender
Location
City Udam Singh Nagar
State Uttarakhand
Key Dates
Publish Date 19 Nov 2026
Submission Date 04 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 11800
EMD 4.21 Lakhs
Exemption Not Available
Document List
3fad3eb0-3c0f-4ba2-947a-6f9fe5ae2a83.html
BOQ_120862.xls
FormAandB.pdf
GeneralInstruction88202627.pdf
TechnicalSpecification33KVACS.pdf
Tendernotice_1.pdf
TN88202627tenderdocument3_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

3fad3eb0-3c0f-4ba2-947a-6f9fe5ae2a83.html

xls

BOQ_120862.xls

pdf

FormAandB.pdf

pdf

GeneralInstruction88202627.pdf

pdf

TechnicalSpecification33KVACS.pdf

pdf

Tendernotice_1.pdf

pdf

TN88202627tenderdocument3_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender