Health and Family Welfare Government Departments Closing in 15 days TDR #58610518

Tender For Setting Up Of E-Sewa Kendra In Porta Cabin In Subordinate Court Campus At Vandavasi In Tiruvannamalai District.

Issued by Government Departments · Tiruvannamalai, Tamil Nadu
Tender Value
4.17 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
15 days left
EMD
4170
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruvannamalai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Setting Up Of E-Sewa Kendra In Porta Cabin In Subordinate Court Campus At Vandavasi In Tiruvannamalai District.

BOQ

Name of Work:- Setting up of E-Sewa Kendra in Porta Cabin in Subordinate Court campus at Vandavasi in Tiruvannamalai District.
Sl. No. Item Description
1Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.
2Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means
3Brick work in Cement Mortar 1:5 (One Cement and Five Crushed Stone Sand) using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. Other type of bond shall be done as directed by the Executive Engineer in charge.
4For Foundation and Basement
5Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
6Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means
7For Foundation and Basement
8Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.
9Supplying, fabricating, and transporting a fully finished 20' x 10' prefabricated office container. The side sheet has a thickness of 1.6mm, the roof sheet is 2mm thick, and the bottom sheet is 28mm thick. It features an 8mm MDF interior wall lining mounted on a 35x35mm wooden frame with thermocol insulation, a ceiling finish and finishing with 1mm thick Vinyl flooring. The container includes 6 work-stations, each of size 2'x4' with laminate finish and one executive MD table measuring 2'x 4 1/2' for the video conference room. Providing an additional 2 nos of MS entrance door with rain cutter and an internal access UPVC door closer and Stopper of size 3'x7'. Internal full partitions are included for the video conference cabin between e-sewa center. It has 5 nos of UPVC sliding windows with lock of size 3'x2' to improve lighting and ventilation. The electrical setup includes conduits, basic wiring, and 22-watt LED lights (6 nos), along with 2 nos of outer bulkhead lights and 6 nos of 6-amp switches & Sockets and 10 nos of 10-amp switches & sockets and provisions for 5 nos of wall-mounted fans of approved quality. This includes all costs for fabrication, fitting, outer two coat of enamel paint, finishing, loading, transportation, fixing in position and installation etc. complete complying with standard specification.
10GST @ 18% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58610518
AUTHORITY Government Departments
TENDER VALUE 4.17 Lakhs
LAST DATE 04-12-2026
Authority
Authority Name Public Health Department.
Work Description Tender for Setting Up Of E-Sewa Kendra In Porta Cabin In Subordinate Court Campus At Vandavasi In Tiruvannamalai District.
Basic Detail
Tender No D1/F.1013/26-27/6TN-4/18.11.26
Bidding Type Tender
Location
City Tiruvannamalai
State Tamil Nadu
Key Dates
Publish Date 19 Nov 2026
Submission Date 04 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value 4.17 Lakhs
Tender Fee Ref. Documents
EMD 4170
Exemption Available
Document List
699613f5-8f2f-463b-89db-1235f842cb1b.html
BOQ_873987.xls
TenderCondition.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

699613f5-8f2f-463b-89db-1235f842cb1b.html

xls

BOQ_873987.xls

pdf

TenderCondition.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender