Bids Are invited for Custom Bid For Services - Erection Earthing Pole Painting And Allied Electrical Works At Mahadeopuri Ug Mines - Erection Of Rs Joist/H-Beam/Steel Tubular/Steel Rail Poles Of Length Exceeding 7 M But Not Exceeding 10 M, Including
Tender Overview
Project Description
Bids Are invited for Custom Bid For Services - Erection Earthing Pole Painting And Allied Electrical Works At Mahadeopuri Ug Mines - Erection Of Rs Joist/H-Beam/Steel Tubular/Steel Rail Poles Of Length Exceeding 7 M But Not Exceeding 10 M, Including Cement Concrete 1:3:6 Foundation, Muffing, Excavation, Backfilling And All Incidental Works Complete. , Erection Of Rs Joist/H-Beam/Steel Tubular/Steel Rail Poles Of Length Exceeding 10 M But Not Exceeding 15 M, Including M-10 Cement Concrete Foundation/Base, Muffing, Excavation, Backfilling And All Incidental Works Complete. , Supplying And Erecting Complete Galvanized Stay Set Comprising 19 Mm Dia × 1.8 M Long Stay Rod, 300 × 300 × 7.5 Mm Anchor Plate, Thimble, Stay Clamp, 19 Mm Dia × 600 Mm Turnbuckle And 7/4.00 Mm Dia G.I. Stay Wire, Including M-10 Cement Concrete Foundation, Excavation, Refilling And All Necessary Accessories, Complete As Required. , Supply, Fabrication And Erection Of Angle/Channel/Flat Iron Fittings For Overhead Lines And Substations, Including D-Brackets, Cross-Arms, Top Clamps, V-Cross-Arms, Back/Support Clamps And Similar Fittings, Complete With Required Nut-Bolts, Drilling, Fabrication, Welding, Cutting, One Coat Of Red Oxide Primer And Two Coats Of Aluminium Paint, As Per Specifications And As Required. , Supplying And Erecting 11 Kv Porcelain Pin Insulator Complete With Long Steel Head Gi Pin, Nut, Washer And All Necessary Fittings And Accessories, As Required. , Supplying And Erecting 11 Kv Porcelain Disc Insulator For 11 Kv Overhead Lines, Complete With Galvanized Insulator Fittings Of Ball-And-Socket Type, Galvanized Strain Clamp, Bolts, Nuts, Washers And All Necessary Accessories, As Required. , Supply And Fixing Of Anti-Climbing Device With 2-Ply G.I. Barbed Wire Weighing 1 Kg Per Pole, Complete With Necessary Fittings And Accessories, As Per Mpmkvvcl Specifications And As Required. , Supply, Laying And Fixing Of G.I. Earth Coil Made Of 4 Mm Dia G.I. Wire With 120 Turns Of Approximately 50 Mm Dia, Including 3 M Long Tail, Duly Connected And Earthed With The Pole In The Existing Earth Pit, Complete As Per Specifications And As Required. , Supplying And Fixing 33/11/0.4 Kv Enamel-Coated Danger Board Of Size 200 × 250 Mm, Including Suitable Clamps And Fixing Hardware On Existing Ht/Lt Structures/Poles, Complete As Per Specifications And As Required. , Supplying And Fixing Limit Switch With Necessary Accessories And Arrangements On Existing Ht/Lt Structures/Poles, Including Ab Switch Handle And Interlocking Arrangement With Distribution Panel Main Incoming Lt Switchgear/System, Complete As Required And As Per Specifications. , Supplying, Drawing And Laying Of 11Kv Grade Arial Bunch Cable :- 3X70 + 1X70 Sq.Mm Pvc-Insulated Xlpe Aerial Bunched Power Cable With H2/H4 Grade Aluminium Solid/Stranded Conductors Conforming To Is 7098 (Part-Ii), Complete With Aluminium Alloy Messenger Wire Of Approved Make, Including All Necessary Materials, Fittings, Accessories, Handling And Installation In Air, Complete As Per Specifications , Providing And Making Cable End Termination With Heat-Shrinkable Termination Kit 11 Kv Xlpe Cable O.D. Termination 3 X 70-120 Sq. Mm., Complete With All Necessary Accessories Including Cable Lugs, Suitable For 33 Kv/11 Kv 3-Core Xlpe Insulated Aluminium Conductor Cable, Including Connection, Testing And Commissioning, Complete As Per Specifications And Accepted Standards. , Supplying And Drawing Of Stranded Aluminium Conductor Steel Reinforced (Acsr) 0.1 Sq Inch (100 Sq.Mm Al. Eq.)- (Dog) Of Approved Make Conforming To Is 398:1976, Including Stringing, Making Off, Binding At Existing Insulators, Jointing, Jumpering, Tearing Off, Connecting And Clearing Of Obstacles, If Any, Complete As Required And As Per Specifications. , Supplying And Drawing Of Stranded Aluminium Conductor Steel Reinforced (Acsr) 0.05 Sq Inch (55 Sq.Mm Al. Eq.)- (Rabbit) Of Approved Make Conforming To Is 398:1976, Including Stringing, Making Off, Binding At Existing Insulators, Jointing, Jumpering, Tearing Off, Connecting And Clearing Of Obstacles, If Any, Complete As Required And As Per Specifications. , Supplying And Drawing 13 Sq. Mm (4 Mm Dia.) G.I. Guard Wire/Earth Wire/Bearer Wire, Including Stringing, Binding At Existing Insulators/Brackets, Jointing, Jumpering, Connecting, Providing Cradle And Clearing Of Obstacles, If Any, Complete As Required And As Per Specifications. , Supply And Erection Of Approved-Make, Maintenance-Free Earthing Electrode Of Pipe-In-Pipe Technology Conforming To Is 3043:1987, Comprising Corrosion-Free 2.0 M Long G.I. Pipe-In-Pipe Earthing Electrode , Comprising Outer G.I. Pipe Of 50 Mm Dia With 80–200 Micron Galvanizing And Inner G.I. Pipe Of 25 Mm Dia With 200–250 Micron Galvanizing, Complete With 12 Mm Dia Connection Terminal, Installed In Normal Soil With 25 Kg (One Bag) Of Ul-Listed Bentonite Backfilling Compound Around The Electrode Up To Ground Level, Conforming To Relevant Indian/International With All Necessary Accessories And As Required. With Constant Ohmic Value, Surrounded By Highly Conductive Earth-Enhancement Compound Having High Charge-Dissipation Characteristics, Suitable For Effective And Maintenance-Free Earthing, Complete With All Necessary Accessories, Installed In An Earth Pit Of Minimum 150 Mm Bore Diameter, Complete As Required And As Per Specifications. , Removing Of Old Paint From Steel And Other Metallic Surface And Making Surface Even. , Providing And Applying One Coat Of Red Oxide Zinc Chromate Primer Over New Steel And Other Metallic Surfaces, Including Thorough Surface Preparation, Supply Of Primer And All Materials, Labour, Tools And Tackles, Complete As Required And As Per Specifications. , Prima Coat With Aluminium Paint, Brushing Complete With Material And Labour Including Preparation Of Surface
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | Erection of RS Joist/H-Beam/Steel Tubular/Steel Rail poles of length exceeding 7 m but not exceeding 10 m, including cement concrete 1:3:6 foundation, muffing, excavation, backfilling and all incidental works complete. | Erection of RS Joist/H-Beam/Steel Tubular/Steel Rail poles of length exceeding 7 m but not exceeding 10 m, including cement concrete 1:3:6 foundation, muffing, excavation, backfilling and all incidental works complete. |
| 2 | Erection of RS Joist/H-Beam/Steel Tubular/Steel Rail poles of length exceeding 10 m but not exceeding 15 m, including M-10 cement concrete foundation/base, muffing, excavation, backfilling and all incidental works complete. | Erection of RS Joist/H-Beam/Steel Tubular/Steel Rail poles of length exceeding 10 m but not exceeding 15 m, including M-10 cement concrete foundation/base, muffing, excavation, backfilling and all incidental works complete. |
| 3 | Supplying and erecting complete galvanized stay set comprising 19 mm dia × 1.8 m long stay rod, 300 × 300 × 7.5 mm anchor plate, thimble, stay clamp, 19 mm dia × 600 mm turnbuckle and 7/4.00 mm dia G.I. stay wire, including M-10 cement concrete foundation, excavation, refilling and all necessary accessories, complete as required. | Supplying and erecting complete galvanized stay set comprising 19 mm dia × 1.8 m long stay rod, 300 × 300 × 7.5 mm anchor plate, thimble, stay clamp, 19 mm dia × 600 mm turnbuckle and 7/4.00 mm dia G.I. stay wire, including M-10 cement concrete foundation, excavation, refilling and all necessary accessories, complete as required. |
| 4 | Supply, fabrication and erection of angle/channel/flat iron fittings for overhead lines and substations, including D-brackets, cross-arms, top clamps, V-cross-arms, back/support clamps and similar fittings, complete with required nut-bolts, drilling, fabrication, welding, cutting, one coat of red oxide primer and two coats of aluminium paint, as per specifications and as required. | Supply, fabrication and erection of angle/channel/flat iron fittings for overhead lines and substations, including D-brackets, cross-arms, top clamps, V-cross-arms, back/support clamps and similar fittings, complete with required nut-bolts, drilling, fabrication, welding, cutting, one coat of red oxide primer and two coats of aluminium paint, as per specifications and as required. |
| 5 | Supplying and erecting 11 kV porcelain pin insulator complete with long steel head GI pin, nut, washer and all necessary fittings and accessories, as required. | Supplying and erecting 11 kV porcelain pin insulator complete with long steel head GI pin, nut, washer and all necessary fittings and accessories, as required. |
| 6 | Supplying and erecting 11 kV porcelain disc insulator for 11 kV overhead lines, complete with galvanized insulator fittings of ball-and-socket type, galvanized strain clamp, bolts, nuts, washers and all necessary accessories, as required. | Supplying and erecting 11 kV porcelain disc insulator for 11 kV overhead lines, complete with galvanized insulator fittings of ball-and-socket type, galvanized strain clamp, bolts, nuts, washers and all necessary accessories, as required. |
| 7 | Supply and fixing of anti-climbing device with 2-ply G.I. barbed wire weighing 1 kg per pole, complete with necessary fittings and accessories, as per MPMKVVCL specifications and as required. | Supply and fixing of anti-climbing device with 2-ply G.I. barbed wire weighing 1 kg per pole, complete with necessary fittings and accessories, as per MPMKVVCL specifications and as required. |
| 8 | Supply, laying and fixing of G.I. earth coil made of 4 mm dia G.I. wire with 120 turns of approximately 50 mm dia, including 3 m long tail, duly connected and earthed with the pole in the existing earth pit, complete as per specifications and as required. | Supply, laying and fixing of G.I. earth coil made of 4 mm dia G.I. wire with 120 turns of approximately 50 mm dia, including 3 m long tail, duly connected and earthed with the pole in the existing earth pit, complete as per specifications and as required. |
| 9 | Supplying and fixing 33/11/0.4 kV enamel-coated danger board of size 200 × 250 mm, including suitable clamps and fixing hardware on existing HT/LT structures/poles, complete as per specifications and as required. | Supplying and fixing 33/11/0.4 kV enamel-coated danger board of size 200 × 250 mm, including suitable clamps and fixing hardware on existing HT/LT structures/poles, complete as per specifications and as required. |
| 10 | Supplying and fixing limit switch with necessary accessories and arrangements on existing HT/LT structures/poles, including AB switch handle and interlocking arrangement with distribution panel main incoming LT switchgear/system, complete as required and as per specifications. | Supplying and fixing limit switch with necessary accessories and arrangements on existing HT/LT structures/poles, including AB switch handle and interlocking arrangement with distribution panel main incoming LT switchgear/system, complete as required and as per specifications. |
| 11 | Supplying, drawing and laying of 11KV grade arial bunch cable :- 3x70 + 1x70 sq.mm PVC-insulated XLPE aerial bunched power cable with H2/H4 grade aluminium solid/stranded conductors conforming to IS 7098 (Part-II), complete with aluminium alloy messenger wire of approved make, including all necessary materials, fittings, accessories, handling and installation in air, complete as per specifications | Supplying, drawing and laying of 11KV grade arial bunch cable :- 3x70 + 1x70 sq.mm PVC-insulated XLPE aerial bunched power cable with H2/H4 grade aluminium solid/stranded conductors conforming to IS 7098 (Part-II), complete with aluminium alloy messenger wire of approved make, including all necessary materials, fittings, accessories, handling and installation in air, complete as per specifications |
| 12 | Providing and making cable end termination with heat-shrinkable termination kit 11 KV XLPE cable O.D. termination 3 x 70-120 sq. mm., complete with all necessary accessories including cable lugs, suitable for 33 kV/11 kV 3-core XLPE insulated aluminium conductor cable, including connection, testing and commissioning, complete as per specifications and accepted standards. | Providing and making cable end termination with heat-shrinkable termination kit 11 KV XLPE cable O.D. termination 3 x 70-120 sq. mm., complete with all necessary accessories including cable lugs, suitable for 33 kV/11 kV 3-core XLPE insulated aluminium conductor cable, including connection, testing and commissioning, complete as per specifications and accepted standards. |
| 13 | Supplying and drawing of stranded aluminium conductor steel reinforced (ACSR) 0.1 sq inch (100 sq.mm Al. EQ.)- (Dog) of approved make conforming to IS 398:1976, including stringing, making off, binding at existing insulators, jointing, jumpering, tearing off, connecting and clearing of obstacles, if any, complete as required and as per specifications. | Supplying and drawing of stranded aluminium conductor steel reinforced (ACSR) 0.1 sq inch (100 sq.mm Al. EQ.)- (Dog) of approved make conforming to IS 398:1976, including stringing, making off, binding at existing insulators, jointing, jumpering, tearing off, connecting and clearing of obstacles, if any, complete as required and as per specifications. |
| 14 | Supplying and drawing of stranded aluminium conductor steel reinforced (ACSR) 0.05 sq inch (55 sq.mm Al. EQ.)- (Rabbit) of approved make conforming to IS 398:1976, including stringing, making off, binding at existing insulators, jointing, jumpering, tearing off, connecting and clearing of obstacles, if any, complete as required and as per specifications. | Supplying and drawing of stranded aluminium conductor steel reinforced (ACSR) 0.05 sq inch (55 sq.mm Al. EQ.)- (Rabbit) of approved make conforming to IS 398:1976, including stringing, making off, binding at existing insulators, jointing, jumpering, tearing off, connecting and clearing of obstacles, if any, complete as required and as per specifications. |
| 15 | Supplying and drawing 13 sq. mm (4 mm dia.) G.I. guard wire/earth wire/bearer wire, including stringing, binding at existing insulators/brackets, jointing, jumpering, connecting, providing cradle and clearing of obstacles, if any, complete as required and as per specifications. | Supplying and drawing 13 sq. mm (4 mm dia.) G.I. guard wire/earth wire/bearer wire, including stringing, binding at existing insulators/brackets, jointing, jumpering, connecting, providing cradle and clearing of obstacles, if any, complete as required and as per specifications. |
| 16 | Supply and erection of approved-make, maintenance-free earthing electrode of pipe-in-pipe technology conforming to IS 3043:1987, comprising corrosion-free 2.0 m long G.I. pipe-in-pipe earthing electrode , comprising outer G.I. pipe of 50 mm dia with 80–200 micron galvanizing and inner G.I. pipe of 25 mm dia with 200–250 micron galvanizing, complete with 12 mm dia connection terminal, installed in normal soil with 25 kg (one bag) of UL-listed bentonite backfilling compound around the electrode up to ground level, conforming to relevant Indian/International with all necessary accessories and as required. with constant ohmic value, surrounded by highly conductive earth-enhancement compound having high charge-dissipation characteristics, suitable for effective and maintenance-free earthing, complete with all necessary accessories, installed in an earth pit of minimum 150 mm bore diameter, complete as required and as per specifications. | Supply and erection of approved-make, maintenance-free earthing electrode of pipe-in-pipe technology conforming to IS 3043:1987, comprising corrosion-free 2.0 m long G.I. pipe-in-pipe earthing electrode , comprising outer G.I. pipe of 50 mm dia with 80–200 micron galvanizing and inner G.I. pipe of 25 mm dia with 200–250 micron galvanizing, complete with 12 mm dia connection terminal, installed in normal soil with 25 kg (one bag) of UL-listed bentonite backfilling compound around the electrode up to ground level, conforming to relevant Indian/International with all necessary accessories and as required. with constant ohmic value, surrounded by highly conductive earth-enhancement compound having high charge-dissipation characteristics, suitable for effective and maintenance-free earthing, complete with all necessary accessories, installed in an earth pit of minimum 150 mm bore diameter, complete as required and as per specifications. |
| 17 | Removing of old paint from steel and other metallic surface and making surface even. | Removing of old paint from steel and other metallic surface and making surface even. |
| 18 | Providing and applying one coat of red oxide zinc chromate primer over new steel and other metallic surfaces, including thorough surface preparation, supply of primer and all materials, labour, tools and tackles, complete as required and as per specifications. | Providing and applying one coat of red oxide zinc chromate primer over new steel and other metallic surfaces, including thorough surface preparation, supply of primer and all materials, labour, tools and tackles, complete as required and as per specifications. |
| 19 | Prima coat with aluminium paint, brushing complete with material and labour including preparation of surface | Prima coat with aluminium paint, brushing complete with material and labour including preparation of surface |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender