Housing Urban and Rular Development Local Bodies Closing in 10 days TDR #58608768

Tender For Orathanadu Block - Pugf- 2026-27 - Renovation Of Iwsc In Ambethkar Nagar At Vadaseri Panchayat In Orathanadu Block.

Issued by Local Bodies · Thanjavur, Tamil Nadu
Tender Value
3.07 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
10 days left
EMD
3100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Orathanadu Block - Pugf- 2026-27 - Renovation Of Iwsc In Ambethkar Nagar At Vadaseri Panchayat In Orathanadu Block.

BOQ

Name of Work:- ORATHANADU BLOCK - PUGF- 2026-27 - Renovation of IWSC in Ambethkar nagar at Vadaseri Panchayat in Orathanadu Block.
Sl. No. Item Description
1Renovation of IWSC in Ambethkar nagar at Vadaseri Panchayat in Orathanadu Block.
2Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil including curing neat finishing, etc., complete complying with standard specifiction.
3Clean removal of Cement Plaster from Walls (SOR 25-26, Page No : 32, Unique Code : W-0104, Rate : Rs.9.06 / Sq.m)
4Chipping of cement concrete and Roughening the Surface (SOR 25-26, Page No : 32, Unique Code : W-0104, Rate : Rs.43.20/ Sq.m)
5Supplying and Filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers
6Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification
7Brick work using country bricks of size 83/4\\"x41/4\\"x23/4\\" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.
8Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
9Providing Granolithic Floor Finish of the following thickness with Plain Cement Concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) (25mm Thick )
10Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
11White washing one coat wth freshly burnt white shell lime in all floor includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer
12Re Painting Distempering the Old Walls and Ceiling One Coat with best Oil Bound Distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer
13Re Painting the Walls with Two Coats with First Class Quality Plastic Emulsion Paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358
14Re Painting the new Iron Works Two Coats with Syntactic Enamel Paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)
15Re Painting the Old Iron Works Two Coats with Syntactic Enamel Paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)
16Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat M.Sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.
17Wiring with 2x1.50 Sqm sqm PVC Insulated SC Unsheathed Copper Conductor of 1100 Suitable PVC Rigid pipe on wall and ceilling with PVC accessories.
18Supply and fixing of WT bulk head fitting with guard Phillips/bajaj/Crompton suitable for 11w CFL Lamp SD 87
19Supply and Fixing of bulb fittings with guard (Phllips / bajaj /Crompton)suitable for 11 W CFL lamp SD 80
20Cost, supply and PVC Water Tank 500 Lit
21GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58608768
AUTHORITY Local Bodies
TENDER VALUE 3.07 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Orathanadu Block - Pugf- 2026-27 - Renovation Of Iwsc In Ambethkar Nagar At Vadaseri Panchayat In Orathanadu Block.
Basic Detail
Tender No Rc.No.2846/2026/B2 dated.18.11.2026
Bidding Type Tender
Location
City Thanjavur
State Tamil Nadu
Key Dates
Publish Date 19 Nov 2026
Submission Date 03 Dec 2026
Open Date 03 Dec 2026
Finance
Tender Value 3.07 Lakhs
Tender Fee Ref. Documents
EMD 3100
Exemption Not Available
Document List
b61a9a91-96a0-474a-9fe8-281ef0783e8e.html
BOQ_873887.xls
PriceBidPIWSCVadaseri.pdf
TechinalBidIWSCVadaseri.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

b61a9a91-96a0-474a-9fe8-281ef0783e8e.html

xls

BOQ_873887.xls

pdf

PriceBidPIWSCVadaseri.pdf

pdf

TechinalBidIWSCVadaseri.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender