Tender For Reconstruction Of Stores Godown At South Gate
Tender Value
20.78 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
20 days left
EMD
1.23 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reconstruction Of Stores Godown At South Gate
BOQ
| Sl. No. | Item Description |
| 1 | Reconstruction of Stores Godown at South Gate BOQ Reconstruction of Stores Godown at South Gate SL NO DESCRIPTION UNIT QTY RATE (RS) AMOUNT (RS) Preamble: All dismantled serviceable materials shall be stacked at the designated location within the campus, as per the directions of the Engineer-in-Charge. The unserviceable materials shall be removed and disposed of outside the campus as per the directions of the Engineer-in-Charge. |
| 2 | Demolishing cement concrete manually/ by mechanical means includingdisposal of material to the appropriate disposal area as per direction of Engineer-in-charge. |
| 3 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. |
| 4 | Demolishing block work manually/ by mechanical means including stackingof serviceable material and disposal of unserviceable material to theappropriate disposal area as per direction of Engineer-in-charge. In cement mortar. |
| 5 | Demolishing stone rubble masonry manually/ by mechanical meansincluding stacking of serviceable material and disposal of unserviceablematerial to the appropriate disposal area as per direction of Engineerin-charge. |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutterincluding chowkhats, architrave, holdfasts etc. complete and stackingto the appropriate disposal area as per direction of Engineerin-charge.Of area beyond 3 m² . |
| 7 | Dismantling roofing including ridges, hips, valleys and gutters etc., andstacking the material to the appropriate disposal area as per direction ofEngineer-in-charge.G.I. Sheet. |
| 8 | Dismantling steel work in built up sections in angles, tees, flats and channelsincluding all gusset plates, bolts, nuts, cutting rivets, welding etc.including dismembering and stacking to the appropriate disposal areaas per direction of Engineer-in-charge. |
| 9 | Dismantling steel work in frames, trusses, purlins and rafters upto 10metres span and 5 metres height including stacking to the appropriatedisposal area as per direction of Engineer-in-charge. Of sectional area 40 cm² and above. |
| 10 | Earth work in surface excavation for stripping, seating of bund, Road way bymanual means for lowering & levelling the ground for all works other thanfoundation & depth in Ordinary rock and soft rock upto 300mm depth as perdrawing and technical specifications, including setting out, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. |
| 11 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 12 | Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 13 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 14 | Disposal of building rubbish / malba / similar unserviceable, dismantledor waste materials by mechanical means, including loading, transporting,unloading to approved municipal dumping ground or as approved byEngineer-in-charge to the appropriate disposal area. |
| 15 | Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates. |
| 16 | Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finishedlayers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. |
| 17 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / softannealed steel wire and other ancilary operations complete as per drawing and technical specification. |
| 18 | Providing Size Stone masonry with hard stone in foundation & plinth withCement mortar 1:6 (1 cement : 6 coarse sand) |
| 19 | Providing and constructing load bearing wall with Solid Concrete blocksof size 400x150x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005including cost of all materials, labour, scaffolding and curing, usagecharges of machinery etc complete as per technical specifications. |
| 20 | Supplying and fixing of 75mm thick including all necessary supporting frame work internal Aerocon panel sandwich panel of 4mm thick fiber reinforced cement bonded plain sheets on either side enclosing a light weight core composed of portland cement, binders and a mix of silicaceous and micacious material aggregate with tongue and groove arrangement. The aerated panels should have excellent acoustic properties and fire rated for four hours (3-inch-thick panels) including two coats of paint complete finish. Make: Birla or equivalent. The rate to include all other accessories, materials, scaffolding charges, transportation charges and other incidental charges etc complete and as directed by Engineer - In - Charge. |
| 21 | Cutting and finishing of vents in aerocon panel of required size and neat pop finish at the sides and edges. The rate to include all other accessories, materials, scaffolding charges, transportation charges and other incidental charges etc complete and as directed by Engineer - In - Charge. |
| 22 | Finishing walls with Acrylic Smooth exterior paint of required shade :Newwork (Two coat applied @ 1.67L/10 m² over and including priming coat ofexterior primer applied @ 2.20 kg/10 m²) with paint of approved qualityto give an even shade, after thoroughly brooming the surface to remove alldirt, dust, mortar drops and foreign matter including preparing the surfaceeven and sand paper smooth, cost of materials, labour complete as perspecifications and as per directions of Engineer-in-charge. |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. |
| 24 | Providing and fixing factory made single extruded WPC (Wood PolymerComposite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (SuspensionGrade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for100 g) fabricated with miter joints after applying PVC solvent cement andscrewed with full body threaded star headed SS screws having minimumframe density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) &1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus ofelasticity 900 N/mm2 and resistance to spread of flame of Class A categorywith property of being termite/borer proof, water/moisture proof and fireretardant and fixed in position with M.S hold fast/lugs/SS dash fastenersof required dia and length complete as per direction of Engineer-InCharge.(Including all relatable fixtures ) Size 62 x 125mm |
| 25 | Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges. 35 mm thickness(Including all relatable fixtures ) |
| 26 | Providing & fixing of 3-track x 2-panel sliding windows made out of multichambered UPVC(Matching to RAL-9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) andlead free, gaskets -grey colour having isolated drainage and reinforced withGalvanized Iron profile through-out the window frame. The outer framehaving an overall size of 108mm width x 45mmheight with reinforcementof 1mm thickness and Sash with overall size of 39mm x 75mm with GIreinforcement of 2mm and powder coated mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) |
| 27 | Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUFSheet) having modular density 40kg/m2 and size 1.06m width and 7.60mlength sheets roof having external sheet of 0.5mm steel, bottom sheet of0.40mm steel with powder coated finish. The precoated sheet shall be ofminimum 240MPa steel conforming to IS 14246 : 1995 and shal have zinccoating with minimum 120gsm as per IS 277:1992,.The roofing system shallhave suitable water proof over lapping arrangments and GRIHA ceritifed.The fasting shall be of self tapping screws of required length with PVC head along with washer pre-painted aluminium cap unit with build in seal arrangments. The entire roof shall be firmly fastened to the existng frame including all lead and lifts, loading & unloading ,usage charges of machinery and equipments, transportation charges,labour charges and all other incidental charges etc.,complete as per standard technical detailed specifications and as directed by the Engineer in charge of work. 50mm thickness |
| 28 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. |
| 29 | Providing and fixing Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes including cost of materials, labour, usagecharges of machinery complete as per specifications and as per directionsof the Engineer-in-Charge. |
| 30 | Providing and fixing Structural Steel work in single section, fixedwith or without connecting plate, including cutting, hoisting, fixing inposition and applying a priming coat of approved steel primer all completeincluding cost of materials, labour, usage charges of machinery completeas per specifications and as per directions of the Engineer-in-Charge. |
| 31 | Providing and laying 52 mm thick cement concrete flooring with concretehardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) andtop layer 12 mm thick cement hardener consisting of mix 1:2 (1 cementhardener mix : 2 graded stone aggregate 6 mm nominal size) by volume,hardening compound mixed @ 2 L per 50 kg of cement or as per directionof Engineer incharge. |
| 32 | Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (approx. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide). Total 0.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender