Tender For Renovation Of Social Welfare Department 3Rd Floor Additonal Town Hall Building Sector-17, Chandigarh. (E.I. Work) (Ibm Scheme No. W1/2026/26768).
Tender Value
18.72 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
37450
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Social Welfare Department 3Rd Floor Additonal Town Hall Building Sector-17, Chandigarh. (E.I. Work) (Ibm Scheme No. W1/2026/26768).
BOQ
| Sl. No. | Item Description |
| 1 | DSR Item No. 1.10Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 2 | Group-C |
| 3 | DSR Item No. 1.15Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required. |
| 4 | Group-C |
| 5 | DSR Item No. 39.17 Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C. Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg |
| 6 | 1 Run of cable |
| 7 | DSR item No.1.31Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 8 | DSR item No.1.32Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 9 | DSR Item No.1.21Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 10 | DSR Item No. 1.17Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 11 | 3 x 1.5 sq. mm |
| 12 | 3 x 2.5 sq. mm |
| 13 | 3 x 4 sq. mm |
| 14 | DSR item No.1.27Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 15 | 1 or 2 Module (75 mmX75 mm) |
| 16 | 8 Module (125 mmX125 mm) |
| 17 | 12 Module (200 mmX150 mm) |
| 18 | DSR item No.1.25Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 19 | DSR item No.1.24Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 20 | 5/6 amps switch |
| 21 | 3 Pin 5/6 A. socket outlet |
| 22 | Bell push |
| 23 | DSR item No.1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 24 | DSR ITEM NO. 8.7LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, (As per Completed Item on 12 of DNIT ) |
| 25 | 36 watt |
| 26 | DSR ITEM NO. 9.2Brush Less Direct Current (BLDC) MotorSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al bodyPower Factor not less than 0.9, (As per Completed Item on 13 of DNIT ) |
| 27 | 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 28 | DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 29 | Single pole |
| 30 | Triple pole and neutral |
| 31 | DSR Item No. 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator). |
| 32 | 4 way (4 + 12) Double door |
| 33 | Supply and fixing of 12 modules (200 mm x 150 mm) G.I box suitable for accommodate the following accessories along with modular base and cover plate for modular switches in recess / surface etc as required for Computer Point with 4 Nos. 5/6 Amp. modular switch and 4 Nos. 3 pin 5/6 Amp. modular socket outlet. (As per Completed Item on 16 of DNIT ) |
| 34 | Supply and Erection of fan hook for erection of ceiling fan. The hook shall be made out of ½” dia M.S. bar in ‘U’ shape formation. It shall be fixed after chasing the RCC Slab and making necessary repair, plastering to site in original position. The job includes the labour & petty material reqd. to complete the job. |
| 35 | Supply and fixing extra down rod of 15 mm dia G.I. pipe length to fix the ceiling fan. The job includes cost of cutting, making holes and cutting groove in pipe for proper tightening of rod to the fan motor. (As per Completed Item on 18 of DNIT ) |
| 36 | Supply & fixing of Computer jack & contact one module RJ45 of Molex/ R&M/ Panduit make including making connection etc. as required to complete the job to the entire satisfaction of Engineer-in-charge. |
| 37 | Supply & erection of Cabin Fan 16\\" sweep (metal body) oscillating type complete with aluminium blades & regulator. The fan should have regulator switch for speed regulation. The fan should be of Havells make V3/Crompton make Strom2/ Orient make Tornado-II only. (As per Completed Item on 20 of DNIT ) |
| 38 | Supply and laying of XLPE insulated PVC sheathed Aluminium conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of M.S. clamp of suitable thickness. (As per Completed Item on 21 of DNIT ) |
| 39 | 25 Sq.mm. 3.5 Core XLPE Armoured Aluminium conductor cable |
| 40 | LT PANEL: Supply, erection testing and commissioning of L.T. Cubical panel outdoor type double door with canopy, degree of protection IP–65 as per IS 8623/93 cold rolled sheet steel 1.6mm thick for frame work,(As per Completed Item on 22 of DNIT ) |
| 41 | Size of LT Panel 1524mm x 1524mm of suitable depth. |
| 42 | S/I/T/C of linear suspended luminaire 4’ long made up of extruded aluminium with PMMA diffuser for standalone and seamless end to end connectivity. The fitting is to be installed on existing surface with the help of two no. suitable length universal suspensions suitable for quick on site adjustment. (As per Completed Item on 23 of DNIT ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender