Tender For Reconductoring Acsr Conductor With Three Phase Abc Under Cherukol Vallappura Transformer Under Electrical Section Kozhencherry
Tender Value
7.56 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
3 days left
EMD
19000
Bank guarantee accepted
Document Fee
1888
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathanamthitta → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reconductoring Acsr Conductor With Three Phase Abc Under Cherukol Vallappura Transformer Under Electrical Section Kozhencherry
BOQ
| Sl. No. | Item Description |
| 1 | 205-Providing Stay for LT poles including digging & back filling pit in ordinary soil. |
| 2 | 119-Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil. |
| 3 | 206-Providing Strut using LT PSC pole including digging and back filling pit in ordinary soil. |
| 4 | 706-Labour charges for loading LT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle). |
| 5 | 207-Providing Fly stay for LT pole using LT PSC pole including digging and back filling pit in ordinary soil. |
| 6 | 706-Labour charges for loading LT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle). |
| 7 | 204-Erecting one LT PSC Pole in position including digging & back filling pit in ordinary soil. |
| 8 | 706-Labour charges for loading LT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle). |
| 9 | 702-Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle). |
| 10 | C-202526-4605-1-Fitting and erecting one HT PSC pole in position excluding fitting V cross arm and F top bracket, digging and back filling pit. |
| 11 | 112-Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing). |
| 12 | 451-Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work. |
| 13 | 452-Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work. |
| 14 | 610-Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole including disconnecting and reconnecting wires. |
| 15 | 407-Renewal of existing damaged/broken old LT stay in existing stay rod. |
| 16 | 405-Additional rate for refitting/redoing one Shackle Set, including reshacling one span, while renewing any type of LT pole. |
| 17 | 554-Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same. |
| 18 | 553-Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same. |
| 19 | 421-Straightening one slanted LT pole after unbinding the line and binding the line after work. |
| 20 | 568-Dismantling one section fuse from structure and bringing back to section store. |
| 21 | 221-Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt & nut etc. |
| 22 | 163-Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil & backfilling. |
| 23 | 726-Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges. |
| 24 | 1109-Erection of Anchor clamp / dead end clamp for LT ABC of any size |
| 25 | 1120-Installation of Pre-insulated straight through joints for 16sqmm cable |
| 26 | 1122-Installation of Pre-insulated straight through joints for 50sqmm cable |
| 27 | 1123-Installation of Pre-insulated straight through joints for 70sqmm cable |
| 28 | 1110-Erection of suspension clamp for LT ABC of any size |
| 29 | 1109-Erection of Anchor clamp / dead end clamp for LT ABC of any size |
| 30 | 2014-Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane |
| 31 | 1105-Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles |
| 32 | 1106-Stringing of 1.1 kV Aerial bunched cable of size 1 x 25 + 1 x 25 sqmm with bare/insulated Messenger through existing poles |
| 33 | 1109-Erection of Anchor clamp / dead end clamp for LT ABC of any size |
| 34 | 1110-Erection of suspension clamp for LT ABC of any size |
| 35 | 1119-Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm |
| 36 | 1115-Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm |
| 37 | 1116-Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap : 4-35 sqmm |
| 38 | 1141-Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size |
| 39 | 565-Dismantling (without damage) one km LT single phase 2 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly. |
| 40 | 566-Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly. |
| 41 | 567-Dismantling (without damage) one km LT additional conductor line by dismantling cross arms, insulators and stacking the conductors in rolls properly. |
| 42 | 1141-Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender