Housing Urban and Rular Development Government Departments Closing in 5 days TDR #58607184

Tender For Periodic Renewal And Road Safety Works On The Road Stretch From Thakurdwara-Ratupura Marg To Tajpur (Via Pipalgaon, Khabadiya Ghat, And Sehal Marg), Including The T-Junction/Y-Junction Near The Awadi Bhago Educational Institutions.

Issued by Government Departments · Moradabad, Uttar Pradesh
Tender Value
1.38 Crore
Estimated cost
Bid Submission
25 Nov 2026
5 days left
EMD
8.95 Lakhs
Bank guarantee accepted
Document Fee
2354
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Moradabad → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Periodic Renewal And Road Safety Works On The Road Stretch From Thakurdwara-Ratupura Marg To Tajpur (Via Pipalgaon, Khabadiya Ghat, And Sehal Marg), Including The T-Junction/Y-Junction Near The Awadi Bhago Educational Institutions.

BOQ

Name of Work:-
Sl. No. Item Description
1TRAFFIC SIGNS - 90 cm Equilateral Triangular board Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. LKO S.I. No. 18(I) Chap. 26.
2TRAFFIC SIGNS - MAXIMUM SPEED LIMIT Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly designd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.LKO S.I. No. 18(V) Chap. 26.
3Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35 The finished surface to be level, uniform and free from streak and holes Edge line/centre line/Zebra Crossing/ Rumble stripe LKO S.I. No. 2 Chap. 26.
4Providing and laying Repeated bar marking with hot appiled thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, Thickness of 5 mm is exclusive of surface applied glass beads as per IRC: 35 The finished surface to be level, uniform and free from streak and holes as per IRC : 35-2015. LKO S.I. No. 18(III) Chap. 26.
5Direction and Place Identification Signs with size more than 0.9 sqm size Board Type IV Providing and fixing of retro reflective cautionary, mandatory and informatory sign as per IRC : 67-2012 made of high intensity grade sheeting vide clause 801.3 friced over aluminium sheeting type IV 1.5 mm thick supported on a mild steel angle iron pst 75mm x 75mmx 6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement 45cmx45cmx60cm below ground level as per aproved drawing. 1.20x0.90m rectangular board Type IV
6TRAFFIC SIGNS - STOP Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly designed foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. LKO S.I. No. 18(VI) Chap. 26
7Speed Table (Trapezoidal Hump) Providing and Constructing of Speed Table with Stone set pavement and premix carpet to the required grade, level and alignment, rolling with smooth wheeled roller to achive the desired compaction as per direction E/I. Providing and applying Tack coat with VG-10 Bitumen over Bituminous surface at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic ar per Technical Specification Clause 503.
8Speed Table (Trapezoidal Hump) Providing and Constructing of Speed Table with Stone set pavement and premix carpet to the required grade, level and alignment, rolling with smooth wheeled roller to achive the desired compaction as per direction E/I. Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.
9Speed Table (Trapezoidal Hump) Providing and Constructing of Speed Table with Stone set pavement and premix carpet to the required grade, level and alignment, rolling with smooth wheeled roller to achive the desired compaction as per direction E/I. Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects
10Relective Raised pavement marker (Road studs/Cat Eye) Supply and fixing of reflective raised pavement marker with its body surface made of tough ASA (Styrene Acrylonitrite) or HIPS high inpact polystyrence) or Acrylontirle butadiens styrence (ABS), the marker shall a lord of 1335 kg tested in accordance with ASTMD 4280 & its reflective panels shall consist of no of lenses containing single or dual prismatic cube of providing total internal reflection of the light entiring the lense face retro reflecting surface shall preferably be 35 ±5o to base and area of each retro reflecting surface shall not be less than 13.0 sqcm road studs shall be visiblily marked with name trademark or other means of identification of the menufacturer diamention of road studs should not be less than 100mmx100mmx10mm RPM (With shank) as per ASTM.
11Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.
12Construction of sub grade and earthern shoulders with approved material obtained from borrow pits with all lifts and leads transporting to sites, spreading, grading to required slope and compacted to meet requirement of table 300.2
13Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method, with rotavator at O.M.C. and compacting with smooth wheeld roller to achieve the desired density, complete as per Technical Specification clause 401.
14Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness ,hand packing, rolling with smooth wheel roller 80-10 Kn in stages to proper grade and camber applying and brooming crushable screening to fill-up the interstices of coarse aggregate watering and compacting to the required dencity grade 2 as per tech.spec.Clause 405
15Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeld roller 80-100 kN in stages to proper grade and camber, applying and brooming stone screening / binding material to fill-up the interstics of coarse aggregate, watering and compacting to the required density.Grading 3 as per Technical Specification clause 405 .
16Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502
17Providing and applying Tack coat with bitumen VG-10 using bitumen pressure distributor @ 0.30 kg. per Sqm on the prepaired dry and hungry bituminous surface cleaned with Hydaulic broom as per Technical Specification Clause 503.
18Providing, laying and rolling of open graded P.C. of 20mm thickness composed of 13.2mm to 5.6mm aggregates eigher using penetration grade bitumen or emulsion to required line grade and level to serve as wearing course on a previously prepared base i/c mixing in a suitable plant, laying and rolling with a three wheeld 80-100 kN static roller capacity, finished to required level and gredes to be followed by seal coat as per Technical Specification Clause 508
19Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58607184
AUTHORITY Government Departments
TENDER VALUE 1.38 Crore
LAST DATE 25-11-2026
Authority
Authority Name Public Works Department
Work Description Tender For Periodic Renewal And Road Safety Works On The Road Stretch From Thakurdwara-Ratupura Marg To Tajpur (Via Pipalgaon, Khabadiya Ghat, And Sehal Marg), Including The T-Junction/Y-Junction Near The Awadi Bhago Educational Institutions.
Basic Detail
Tender No 6501/E-Nivida/MBDCircle/26-27 Date 23.10.2026
Bidding Type Tender
Location
City Moradabad
State Uttar Pradesh
Key Dates
Publish Date 19 Nov 2026
Submission Date 25 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 1.38 Crore
Tender Fee 2354
EMD 8.95 Lakhs
Exemption Available
Document List
8b4275f6-20f7-4998-badc-83ec0bc6378f.html
BOQ_2298153.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

8b4275f6-20f7-4998-badc-83ec0bc6378f.html

xls

BOQ_2298153.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender