Tender For special repair To Agriculture District Office, Gunupur Such As Painting, Ceiling, Plastring, Slope Roof For The Year 26-27
Tender Value
4.66 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
4700
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To Agriculture District Office, Gunupur Such As Painting, Ceiling, Plastring, Slope Roof For The Year 26-27
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling or Removing old lime or Cement Plaster from Brick or stone masonary walls and racking out joints 12mm deep including stacking the useful materials for reuse and removing the derbies within 50m lead including cost, conveyance, of all materials with all labour and T&P,Cess required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge. |
| 2 | Earth work in excavation of foundation in all kinds of soil within all lead and lifts including dressing the sides, shoring (if nacessary), bailing out water and leveling the bed and depositing the excavated materials away from the work site including all costs of labour,sundries, tools & plants required for the work etc. complete as per direction of Engineer-in-Charge. |
| 3 | Supplying, filling in foundation trenches & plinth ditches with sand of approved quality from approved quarry in 23.5cm (9\\") thick layers including watering and ramming with cost, conveyance royalties,EMF,DMF and aditinal charges of all the materials and labour with T&P,Cess required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge |
| 4 | Providing and laying P.C.C (1:3:6) in foundation, floors using 4cm size Hard Granite Metal of approved quality from approved quarry including hoisting, lowering, laying, compacting concrete including watering and curing with cost conveyance, royalty,EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete as per standard specification and direction of Engineer-in-Charge. |
| 5 | Plain Cement Concrete /RCC of proportion (1:2:4) foundation and floors using 12mm size hard black hand broken granite (C.B) chips of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers not exceeding 15 cm (6\\") thick to required level ramming watering curing etc. including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials with all labour with T&P required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 6 | 6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, EMF,DMF and aditinal charges of all materials and labour with T&P, Cess required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge. |
| 7 | Providing 12 mm thick Cement Plaster with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished over brick masonary to the smooth surface walls after raking out the joint including watering and curing ,roughing of corners, providing grooves where ever necessary with cost and conveyance royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 8 | Providing fitting, fixing of Aluminium Door with OEL anodized Al. door section of 9202 as vertical member, 9200 as top and bottom member. 9232 as middle member 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 with Automatic Door closure, 6 Lever MORTICE Lock, Door Stopper, Handle etc. including all cost of labour, T&P, etc. complete as directed by the Engineer-in-charge.Minstrial Room |
| 9 | Providing fitting, fixing of Aluminium Door with OEL anodized Al. door section of 9202 as vertical member, 9200 as top and bottom member. 9232 as middle member 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 with Automatic Door closure, 6 Lever MORTICE Lock, Door Stopper, Handle etc. including all cost of labour, T&P, etc. complete as directed by the Engineer-in-charge. |
| 10 | Finishing wall surfaces with Weather seal coat of two coats over a coat of Primer of approved shade on new works two coats to give an even shade over prepared surfaces including watering and curing with cost and conveyance royalty of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 11 | Distempering Two coats to walls with distemper over a coat of primer an even finished surface of approved shade on prepared surface of new works to give a even shade with cost conveyance royalties of all the materials and all labour with T&P,Cess required for the work etc. (Including cost of distemper) complete in all respect in all floors as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 12 | Painting Two coats with any approved Enamel paints of approved colour, shade over a coat of primer over new Wood / Iron work including sand papering, polishing the surface, cost, conveyance of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender