Tender For special repair To Tahsildar And Adl. Tahasildar Qtr Such As Vehicle Parking Shed, Compund Wall Raising, Door Window Replacement , Inside Building Painting At Gunupur
Tender Value
3.38 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
10 days left
EMD
3400
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To Tahsildar And Adl. Tahasildar Qtr Such As Vehicle Parking Shed, Compund Wall Raising, Door Window Replacement , Inside Building Painting At Gunupur
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying PCC (1:3:6) in foundation and C.D work using 4cm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P,Cess etc complete as per the direction of the Engineer -in –charge. |
| 2 | RCC work of M-20 grade in all floors using 20mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for and necessary centering and shuttering for smoth finishing of work (Excluding cost of reinforcement & binding wires to be used in the work) as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 3 | Supplying and installing UPVC-3 tracks sliding windows and 2 SQM sashes (shutters) with ss mesh sash dimension of 58mm x 32mm and mesh sash dimension 61mm x 37mm for windowb fully reinforced with Galvanized steel of 1.2mm to 2mm}. The sash will be fitted with 5 mm reflective toughened glass of make - Saint gobain/AIS/Goldplus. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from inside /Outside of Dowcoring / GE or equivalent including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge |
| 4 | Providing flush door shutter made out of 32mm thick BWR block board 30mm thick BWR block board pasted with 1mm thick sunmica on both side with all labour iron fittings, wooden hinged cleat etc. fitted and fixed complete in all respect but excluding the cost of iron fittings etc.including all cost, conveyance royalities & taxes of materials, with all labour T&P etc. complete as directed by the Engineer-in-charge. |
| 5 | Providing fitting, fixing of Aluminium Door with OEL anodized Al. door section of 9202 as vertical member, 9200 as top and bottom member. 9232 as middle member fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 with Automatic Door closure, 6 Lever MORTICE Lock, Door Stopper, Handle etc. including all cost of labour, T&P, etc. complete as directed by the Engineer-in-charge. |
| 6 | Finishing wall surfaces with cement putty (water based) of approved quality for making smooth even to receive painting including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 7 | Painting Two coat with any approved plastic emulsion paint of approved shade of new works to give an even shade painter including sand papering, polishing applying putty wherver necessary & cost of scaffolding,staging charges including cost, conveyance and EMF,DMF and aditinal charges all materials with cost of all materials and labour with T&P,Cess, required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender