Public Administrative Department Local Bodies Closing in 19 days TDR #58605733

Tender For Construction Of Toilet At Ward No.10 Panchayat Union Middle School East In Karimangalam Tp

Issued by Local Bodies · Dharmapuri, Tamil Nadu
Tender Value
16 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
19 days left
EMD
16000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dharmapuri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Toilet At Ward No.10 Panchayat Union Middle School East In Karimangalam Tp

BOQ

Name of Work:- Construction of Toilet at Ward No.10 Panchayat Union middle school East in Karimangalam TP
Sl. No. Item Description
1Earth work excavation for foundation in Hard stiff claystiff black cottonhard red earthshales murramgravelstoney earth and earth mixed with small size boulders SS.20B and Sandsilt or other loose soilwet sand or silt not under waterlight black cotton soilsandy loam ordinary soil and to full depth as may be directed except in hardrock requiringblasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completedcleaning and levelling the site etc.complete Narrow Foundations First Depth Upto 2.00m Depth
2Open Earth Work Excavations
3Supplying and filling in foundation and basement with Stone Dust in layers of not more than 15cm thick well rammed watered and compacted etc.complete complying with standard specification.
4Plain Cement Concrete 1:5:10 (one part of cementfive part of Crushed Stone Sand (MSand) and Ten part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixinglaying and labour charges and all incidential charges such as water providing etc.complete as per standard specification
5Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footingscolumn pedestalsplinth beamsgrade beamsstaircase stepsSill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boardinglaid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner vertical stiffenerside support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid).
6Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc.. complete in all floors complying with standard specification. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
7Supplying and erecting centering for plane surfaces such as RCC Floor/Roof BeamLintelsCantilever BeamsBed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
8Supplying and erecting centering for plane surfaces such as RCC Floor SlabRoof SlabLoftLanding Slabsetc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
9Providing and laying in position Standardised Concrete Mix M 20 Grade in accordance with IS 456 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to acceleraterelated setting of concreteimprove workability without imparing strength and durability with about (5.0cum)7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum)5156kg of 10 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (MSand)but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including layingvibrating with mechanical vibratorsfinishingcuringetc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc.complete complying with standard specification and as directed by the departmental officers The Coarse and Fine aggregates to be used should comply with the requirements of IS standards. Upto Basement
10Ground Floor
11Supplyingfabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMT and all grade like Fe 500Fe550DFe 500 D etc.for all RCC works as per design given including cost of steel reinforcement and G.I. binding wirewastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) Ground Floor
12Supplying and filling in foundation and basement with Good Earth outside the boundary 2Km from in layers of not more than 15cm thick well rammed watered and compacted etc.complete complying with standard specification.
13Brick work in Cement Mortar 1: 5 (One Cement and Five Crushed Stone Sand) using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077 1992 for foundation and basement including Cost of Mortar Plasticizer curingetc.complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212 1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge.Upto Basement
14Ground Floor
15Brick work in Cement Mortar 1: 3 (One Cement and Three Crushed Stone Sand) using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077 1992 for foundation and basement including Cost of Mortar Plasticizer curingetc.complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212 1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge.Ground Floor
16First Floor
17Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding grinding and fabrication chargescost and conveyance of all materials to site etc complete as per standard specification.
18Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabsbeamssunshadesfaciacanopy slabstaircase waist slablanding slab etc.with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used hacking the surfaces and curingetc.in all floors complying with standard specification and as directed by the departmental officers
19Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand)12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement usedcuring etc. complete complying with standard specification and as directed by the departmental officers.
20Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab the proportion of brick jelly to lime being '32:12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc.complete as per standard specification.
21Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three plastering sand (PSand)) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc.complete
22FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flatscost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc.of sizes specified by Engineers
23Supplying and fixing UPVC (Un Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion freethe profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
24ManufacturingSupplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cuttingbendingweldinggrindingpolishingconveyanceelectrical chargesetc. complete
25Painting two coats of newly plastered wall surface with ready mixed exterior emulsion paint of first quality and of approved colour over a priming coat including preparing the surfaceclean removal of dirt and including necessary plaster of paris putty wherever required etc.complete complying with standard specification.
26Painting the new iron work with two coats of best pproved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat and including cost of painting materialsbrushesputtypreparation of surfaces and scaffolding charges etc.complete complying with standard specification and as directed by the departmental officer.
27Plain Cement Concrete 1:8:16 (one cement eight Commercial Sand( MSand) and sixteen coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixinglaying water carrying with all leads of good water compacting and labour charges and all incidential charges such as water providing etc.complete as per standard specification
28Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (PSand))20mm thick laid in situ and pointed with same coloured cement etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on worketc.complete as per standard speicification.
29Paving the floor with pre polished Cement based hydrualically pressed Anti Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three plastering sand (PSand)) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m.curingetc.complete complying with standard specification and as directed by the departmental officers.
30Dadooing walls with following best approved qualitywhite / colour glazed tiles conforming to IS 15622 of size 300 x 450 x 8mm in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floorscuringetc.complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
31Paving the floor with pre polished concrete anti skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m.curingetc.complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
32Providing & fixing PVC RAIN WATER DOWNFALL PIPE of 110mm dia with necessary T.W.Clamps PlugsShoes Bemdsother clampsscrews nails etc. complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of \\"U\\" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]
33Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron bracketsincluding cost of 15mm diametre brass chromium plated piller tape 32 mm diametre C.P. Waste union32 mm diametre P.V.C. waste pipe with rubber plug and chain15mm diametre G.M.wheel valve15mm dia brass nipple15mm dia nylon connections etc.including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc.complete complying with standard specifications
34Supplying and fixing in position Indian water closet of size 580 X 440mmwhite glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of limetwo parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonryreinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc.complete complying with standard specifications and as directed by the departmental officers.
35Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm diadouble flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cementcement for packingspun yarnteak wood plugsbrass screwsetc.including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI bracketsetc.complete with all fittingssuch as15mm brass ball valve with polythene float with brass handleunion coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittingssuch as15mm bras connections15mm GM wheel valve15mm brass nipple (2 Nos.)15mm nylon connectionTW plugsscrews and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primerdismantling the masonry and re doing the dismantled masonry to original conditionetc.complete complying with standard specifications.
36Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I markof the following sizes including cutting Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak Wood Plugs PVC Clamps and screws making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.32MM dia PVC pipe
3725mm dia.PVC pipe
38Supplying and fixing best approved quality Brass C.P anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak Wood plugs and C.P.Screws etc.complete complying with standard specifications
39Supplying and fixing best approved quality C.P.Soap Tray of size 150mm X 100mm including cost of Teak Woodplugsbrass screws complete complying with standard specifications.
40Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings 100 mm x 75 mm including all charges etccomplete as per standard specification.
41Supplying laying and jointing G.I. Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excluding cost of such specials cutting threading of pipes and fixing to wall with necessary teak wood plugsclamps and screws masking holes on the wall or drilling holes in roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red oxide primer etc.complete.20MM dia G.I pipe
4225MM dia G.I pipe
43Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac thread etc .including labour for cutting and threading of G.I.Pipes etc. complete complying with standard specifications for both internal and external water Supply arrangements.20mm dia G.M.Gate Valve
4425mm dia G.M.Gate Valve
45Suppling and fixing in position 15mm.diameter brass screw down tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellacthread etc.complying with standard specifications and including cutting and threading wherever necessary.
46Supplying and fixing in position P.V.C. specials such as plain benddoor bendplain teedoor teeoffsets Y junctionplain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.Csoil stacksdismadling the brick masonry or R.C.C. floor or Roof slab and redoing the dismandled portion to original condition etc.complete complying with standard specifications.110mm dia PVC Elbow
47110mm dia PVC Tee
48110mm dia PVC Door Elbow
49110mm dia PVC Door Tee
50110mm dia PVC Door Yee
5190mm dia PVC Elbow
5290mm dia PVC Tee
5390mm dia PVC Door Elbow
5490mm dia PVC Door Tee
5590mm dia PVC Door Yee
56Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc.and making connection to all sanitary fittingsdismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original conditioncomplying with standard specifications.
5790mm dia PVC 6KSC Pipe
58Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand)20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement usedcuring etc.complete complying with standard specification and as directed by the departmental officers.
59Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 600 X 600mm in size in C.M 1:3 (One Cement and Three Plastering Sand (P Sand)) 20mm thickof best approved quality and as per standard specifications etc. complete.
60Supplying and fixing P.V.C. ventilating shaft of 100mm dia and 3m height of best approved quality and as per standard specifications.
61Providing and fixing in position superior quality and approved makeLipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection15mm dia GM Wheel Value15mm dia 'B' Class GI Waste Water Pipe15mm dia Nylon Connection15mm dia Brass Nipple etc.including fixing with necessary teakwood wall plugsscrewsetc.and making good the wallsetc.complete as directed during execution.
62Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23
63Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. SD 38
64Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. SD 54
65Supply and fixing of single box type 4'36 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 87
66Earthing as per P.W.D. standard with an earth electrode of 2Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.SD 222
67Supply and fixing of 32A TPN MC switch on incoming and 3Nos. 32A DPMC switch (front handle) as outgoing with suitable adopter box with suitable MS cable entry box trunking boxes and internal connections on suitable angle iron frame work with earth connection etccomplete as per standard specifications SD. 156
68Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5m SD.75
69Supply and run of 4 X 6 sq.mm (84/0.3) 7/20sqmm PVC unshealed copper cable in suitable PVC rigid pipe concealed on wall and ceiling withcontinuos earth wire connection of 14 SWG TC wire with painting of suitable colour SD 68
70Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC power plug point.SD 40
71Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2\\" x 1 1/2\\" x 1/4\\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units(500V) 1 No. Neutral linkcopper earth flat of size 1\\" x 1/4\\" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete.SD 131 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58605733
AUTHORITY Local Bodies
TENDER VALUE 16 Lakhs
LAST DATE 10-12-2026
Authority
Authority Name Town Panchayats
Work Description Tender for Construction Of Toilet At Ward No.10 Panchayat Union Middle School East In Karimangalam Tp
Basic Detail
Tender No Karimangalam_TP_1201_4_2026_A1
Bidding Type Tender
Location
City Dharmapuri
State Tamil Nadu
Key Dates
Publish Date 19 Nov 2026
Submission Date 10 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 16 Lakhs
Tender Fee Ref. Documents
EMD 16000
Exemption Not Available
Document List
44abd5a2-3eb4-44c4-b358-745d48cea6aa.html
BOQ_873669.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
html

44abd5a2-3eb4-44c4-b358-745d48cea6aa.html

xls

BOQ_873669.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender