Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #58605342

Tender For Renovation Of Women Cso Office Bldg

Issued by Statutory Bodies & Commissions/Committees · Kangpokpi, Manipur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Dec 2026
17 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangpokpi → Manipur
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Renovation Of Women Cso Office Bldg

BOQ

Name of Work:- RENOVATION OF WOMEN CSO OFFICE BLDG
Sl. No. Item Description
1CONSRUCTION ITEMS
2Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Center line (L) = (6.50-0.12)+2(5.0+7.50-0.12)+(2.90+2.10+1.60-0.12)+(2.80-0.12)+(1.60-0.12)+(5.0-0.12) - 1/2(4x0.12) = 46.24mfor toilet /bath :- L= (2x2.50)+2(2.10-0.24) =8.72m DeductionDoor (D0)Door (D1)Door (D2)Window
3Providing and laying 75mm thick compacted bed of dry stone aggregate of 40mm thick nominal size incl spreading,well ramming,consolidating and grouting with jamuna sand,incl finishing smooth etc complete as per direction of engr- in- charge Room L = (5+7.5) = 12.50m, B = 5mRoom1Kitchen L = 2.80m, B = 1.60mToilet/Bath L = 2.50m, B = 2.10m
4Cement concrete pavement with 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete.Room L = (5+7.5) = 12.50m, B = 5mRoom1Kitchen L = 2.80m, B = 1.60mToilet/Bath L = 2.50m, B = 2.10m
5Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as white, lvory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc complete.Room L = (5+7.5) = 12.50m, B = 5mRoom1Kitchen L = 2.80m, B = 1.60mToilet/Bath L = 2.50m, B = 2.10m
6Providing and laying 1st quality ceramic glazed floor tiles confirming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, balck odf any size as approved by Engr-in-charge in skirting, raiser of steps and dado over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.Skirting L = 6.5+2.5+1.5+10+2(1.6+2.8)+(3x5)+12.50 = 56.80mWall tilling in Toilet/Bath L = (4x2.1)+(2x2.5) = 13.40mDoor (D0)Door (D1)Door (D2)
7Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead.External wall L = 6.50+5.0+7.50+2.90+(2x2.50)+2.10+(2x1.60)+2.80+5.0+1.50+2.50 = 44.0m
815 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand) on external wallExternal plaster L = 6.50+5.0+7.50+2.90+(2x1.60)+2.80+5.0+1.50+2.50 = 36.90mFor toilet/bath L = 2x2.50+2.10 = 7.10mDeduction:-Door(D0)Door(D1)Door(D2)Window
912 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) .Internal wall L= (6.50-0.24)+2(5+7.5-0.24)+(2.90+2.10+1.60-0.24)+(2.80-0.24)+(1.60-0.24)+1.50+2(5.0-0.24) =52.08mfor toilet bath, L= 2(2.50-0.24)+3(2.10-0.24) = 10.10mDoor(D0)Door(D1)Door(D2)Window
10Finishing wall with water proofing cement paint of required shade: New work (Two or more coat applied @ 3.84 kg/10 sqm)
11Distempering with oil bound washable distemper of approved brand and manufactures give an even shade New work (one or more coats) over and including water thinnable priming coat with cement primer
12Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
13Taking out doors, windows and cleastory windows shutters (steel or wood) including staking within 50 m lead: Of area 3 sq.mtr and belowDoor(D0)Door(D1)Window
14Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 2nd class H/wood Door(D0) L= 2.1x2+1.2=5.40mDoor(D1) L= 2.1x2+1.0=5.20mWindow = L = 2 (1.5+0.9) = 4.80m
15Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned selected planks of sheesham wood 30 mm thick shutters sqm. Door(D0), Door(D1), Window
16Providing & fixing glass panes with putty and glazing clips in steel doors windows, clerestory windows, all complete with : 4.0 mm thick glass panes Window
17Providing and fixing ISI marked oxidised M.S. sliding door bolts of size 250x16 mm with nuts and screws etc. complete:
18Providing and fixing ISI marked oxidised M.S. tower bolt of size 200x10 mm black finish, (Barrel type) with necessary screws etc. complete:
19Providing and fixing factory made PVC door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC form sheet mitered at corners and joint with two Nos 150mm long brackets of 15x15mm MS square tube, the vertical door frame profiles to be reinforced with 19x19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using MS screw 65/100mm size complete as per manufacture specification and direction of Engr-in charge.L= 2x2.1+0.8=5.0m
20Providing and fixing factory made panel PVC door shutter consisting of frame made out of MS tubes of 19 gauge thickness and size of 19x19mm for styles and 15x15mm for top & bottom rails. MS frame shall have a coat of steel primers of approved make and manufacture. MS frame covered with 5mm thick heat moulded PVC \\"C\\" channel of size 30mm thickness,70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle of both side forming styles and 5mm thick, 95mm vide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top , bottom and lock rails shall be provided both side of the panel. 10mm(5mm x 2) thick, 20mm vide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5mm thick both side PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with 7mm(5mm+2mm) thick x 15mm vide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing 30mm thick pre laminated PVC door shutters.
21Dismantling wood work in frames, trusses, purlins and rafters upto 10 mtr span and 5 mtr height including stacking the material within 50 mtr lead: (Of sectional area 40 square centimetres and above)Base tie, King post King post King post King post Shruts Shruts Shruts RafterPurlins
22Dismantling roofing including ridges, hips, vallys and gutters etc., and stacking the material within 50 mtr lead of : (G.S. Sheet)
23Steel work in built up tubular (round, square or rectangular hollow tubes etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete electric resistance or induction butt welded tubesNo. of truss = (12.50/3.0)+1 = 6.0 NosBase tie, 42.40 mm [email protected] Kg/mKing post 21.30mm [email protected] Kg/mKing post 21.30mm [email protected] Kg/mKing post 21.30mm [email protected] Kg/mKing post 21.30mm [email protected] Kg/mShruts 26.90mm [email protected] Kg/mL = √(0.75)²+(0.82)² =1.12mShruts 26.90mm [email protected] Kg/mL = √(0.50)²+(0.82)² =0.96mShruts 26.90mm [email protected] Kg/mL = √(0.25)²+(0.82)² =0.86mRafter 33.70mm [email protected] Kg/mPurlins 48.30mm [email protected] Kg/mGusset plate 8mmth= @62.80 Kg/sqm
24Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engg-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 gm/Sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 mtr or as desired by Engg-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizental/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
25Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: Ridges plain (500-600mm)
26Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) including finishing
27Providing 10mm thick plaster of paries (gypsun anhydrous) celling upto a height of 5m above floor level, over first class kail wood strips 25x6 mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (fram work to be paid separately): Flat surface.L= 12.5-0.18 = 12.32m, B = 6.5-0.24 = 6.26mFor toilet/bath, L= (2.50-0.24) = 2.26m, B = (2.10-0.24) = 1.86mDeductionOpen area
28Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board IS: 3087 marked, in celling with necessary nails etc.completeNo of strip= (12.32/0.50)+1 = 26 nos ( length wise) No. of strip= (6.26/0.50)+1 = 14 nos (width wise)No of strip= (2.26/0.50)+1 = 06 nos ( length wise) No. of strip= (1.86/0.50)+1 = 05 nos (width wise)
29Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste complete, including painting the brackets, cutting and making good the walls whenever required: white glazed fiber clay kitchen sink of size 600x450x250mm
30Providing and wash basin with CI brackets, 15mm CP brass pillar taps, 32 mm CP brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required white vitreous China wash basin size 630x450mm with a pair of 15mm CP brass pillar taps.
31Polyethylene water storage tank with cover and suitable locking arrangment
32Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity- white
33Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing Rectangular shape 453x357 mm
34Providing and fixing on wall face unplasticised - pvc rain water pipes confirming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, single socket pipes 110 mm diameter
35Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the wall etc 15 mm dia nominal bore
36Providing and fixing C.P. brass bib cock of approved quality confirming to IS: 8931: 15 mm nominal bore
37Providing and fixing C.P. brass stop cock of standared design and of approved make confirming to IS: 8931: 15 mm nominal bore
38Providing and fixing C.P. brass angle value for basin mixer and geyser points of approved quality confirming to IS: 8931: 15 mm nominal bore
39Wiring for light point/ fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch phenolic laminated sheet, suitable size of MS box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc
40Supply and fixing piano type switch 5 amps including connection etc
41Supply and fixing 3 pin 5/6 Amps socket outlet including connection etc
42Supply and fixing 8 way SPN DB single pole and neutral steel sheet enclosure double door 240 Volt, prewired connected
43Supply and fixing MCB DP double pole 240V, 40 amps complete with connection \\"B\\" curve.
44Supply and fixing MCB SP 5 to 32 Amps 240V complete with connection \\"B\\" curve
45Supply and fixing LED tube light batten 1x20 watt including bipin holder, LED driver complete with PVC 3 core copper conductors connection etc
46Supply and fixing ceiling rose PVC body etc
47Supply and fixing electronic step type fan regulator incl connection complete
48Supply and fixing ceiling fan 1200mm sweep including down rod, connecting wires as per required incl connection complete
49Supply and fixing exhaust fan 300mm sweep including connecting wires as per required incl connection complete Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58605342
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 09-12-2026
Authority
Authority Name Indian Army
Work Description Tender For Renovation Of Women Cso Office Bldg
Basic Detail
Tender No A/SAD/IGAR(S)/9SECT/12/26-27
Bidding Type Tender
Location
City Kangpokpi
State Manipur
Key Dates
Publish Date 18 Nov 2026
Submission Date 09 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 30000
Exemption Available
Document List
27ec9a32-9fd2-4a93-9b2e-58a2fa79abef.html
BOQ_896821.xls
RFP.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

27ec9a32-9fd2-4a93-9b2e-58a2fa79abef.html

xls

BOQ_896821.xls

pdf

RFP.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender