Tender For Special Repair To Bldg No M-13 And M-14 At Palampur Mil Stn Under Ge Palampur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Dec 2026
18 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No M-13 And M-14 At Palampur Mil Stn Under Ge Palampur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and directed. |
| 2 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and directed. |
| 3 | S&F pressed steel frames for door made out of MS Sheet 1.25mm thick of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 4 | M&L Plain cement concrete, M-15 (Nominal mix), type B-1 (Using 20mm graded crushed stone aggregates) as in filling of steel chowkats or frames, cills and hold fast etc.complete all as specified and directed. |
| 5 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk), and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of GE. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 6 | S&F 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass/ wire gauge etc (without sas bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc size of members of shutters as specified in SSR Part-I,Section 8, clause 8.24 (a) complete all as specified and directed. |
| 7 | M&L for preparation of wooden surfaces of any description exc over 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 8 | M&L for Preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over priming the surface with red oxide complete all as specified and directed. |
| 9 | S&F Stainless steel wire netting 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 10 | Solid PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing as per SSR Pt-II 2010 complete all as specified and directed. |
| 11 | S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick(tiles) with 2 4 or 6 panels design with 2 mm thick moulded prelam PVC sheet on the front face and 2 mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specifications and drawings as per SSR Pt-II 2010, complete all as specified and directed. |
| 12 | S & F for floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor over all length of cover plate 140mm thick complete all as specified and directed. |
| 13 | S&F butt hinges 100mm, cold rolled medium weight mild steel complete all as specified and directed. |
| 14 | S&F 125mm size, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 15 | S&F 150mm long aluminium tower bolts (ISI Marked) extruded type,complete all as specified and directed. |
| 16 | S&F 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 17 | S&F 250 mm size Aluminium alloy sliding door bolt or bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 18 | M&L for powder coated (Minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates, including joing cleats for fixing etc.complete all as specified and directed. |
| 19 | S & F Anodised aluminium three parallel tracks within the frame, allowing for three sliding panels for window and ventilator (two panels fixed with ordinary quality glass of thickness 4.8 mm and one panel fixed stainless steel wire cloth 0.56 mm of nominal dia of each wire and average width of aperture 1.18 mm) (powder coating of any colour and thickness not less than 50 micron) aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as multi point lock,glass sealant etc., complete all as specified. Note:- The rate includes Three track frame , Three no panels(2 glass and 1 wire cloth including 4.8 mm thick glass and wire cloth as described in item description) |
| 20 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 21 | S&F steel window/ ventilator made of MS tubular frame with double shutter (glazed & wire guage) made out of Z section using flash butt welding hinges shall be provided to both shutters including guard bars and all fittings complete all as specified and directed. |
| 22 | M&L for Sheet glass,4.8 mm thick ordinary quality and glazing with oil putty or fix in neoprene rubber in aluminium section any size in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 23 | S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290,Gde-E-16. |
| 24 | Demolition of brick work or stone /boulder masonry, built in CM, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed. |
| 25 | M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 26 | M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 27 | Material & labour for Rendering 10 mm thick CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 28 | M & L for Rendering 15 mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed. Note:- Water proofing liquid compound shall be measured and paid separately. |
| 29 | Material & labour for Rendering 10 mm thick CM 1:4 on fair faces of brick or concrete surfaces finished even & smooth without using extra cement as in manhole, complete all as specified and directed. |
| 30 | Supply only liquid water proofing compound complete all as specified and directed. |
| 31 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 32 | M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) casted in panels as in plinth protection complete all as specified and directed. |
| 33 | M&L for forming 6 mm wide joint in plinth protection and filled with mastic filling comprising of one part of heated bitumen V-30 grade and 3 parts of sand (all by weight), complete all as specified and directed. |
| 34 | PCC 1:4:8(nominal mix) type D-2 (using 40 mm graded crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and directed. |
| 35 | M&L for RCC M-20 nominal mix (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 36 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams flat for fair finished surfaces of concrete, complete all as specified and directed. |
| 37 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 38 | M & L for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups cut to length bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 39 | Dismanting of wall & ceiling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets of any thickness, including cover fillets. |
| 40 | S&F Providing and fixing tiled false ceiling of size 595 x 595mm in true horizontal level suspended on interlocking gypgrid metal grid of hot dipped galvanised steel section (galvanized @ 120 gsm/sqm, both side inclusive) consisting of 3600mm long main 'T' runner size 24x38mm and 0.30mm thick, 1200mm long cross 'T' of size 24 x 25mm and 0.30mm thick secondary cross 'T' of size 24 x 25mm and 0.30mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main 'T' runners are then suspended from ceiling using GI slotted cleats of size 27x37x25x1.6m fixed to ceiling with 8mm dia and 45mm long dashfasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8mm spaced at max 1200mm centre to centre along main 'T' and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall, then 1200mm long cross 'T' is interlocked between the main 'T' at 600mm center to center to form a grid of 1200x600mm and then secondary cross 'T' of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally white coloured Gyproc 8mm thick Dew Drop/Granular tiles of size 595x595mm having foil on backside & PVC paper on front side wrapped around edges to be placedin grid complete all as specified and directed, complete all as specified and directed by GE. |
| 41 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:6 including Dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed by GE. |
| 42 | All as per item no.41 above except in walls such as skirting, complete all as specified and directed. |
| 43 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises complete all as specified and directed. |
| 44 | All as per item no 43 above except in walls over neat cement slurry such as skirting, complete all as specified and directed. |
| 45 | M&L for Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including dismantling of wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed. |
| 46 | M&L for Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement including taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water complete all as specified and directed. |
| 47 | M & L for Rendering 15 mm thick in two coats i.e 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement including taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water complete all as specified and directed. Note :- Water proofing liquid compound shall be measured and paid separately. |
| 48 | M&L for Distempering with 1st quality acrylic distemper (ready mixed ) having VOC content less than 50 gm/litre of approved manufacturer of required shade and colour complete as per manufacturers specification two or more coats over a coat of primer over and including 2 mm thick wall care putty on new plastered surface of wall including preparation of surfaces with complete all as specified and directed. |
| 49 | Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance exterior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces of wall complete including preparation of surfaces of walls complete all as specified and directed by GE. |
| 50 | M&L for Distempering with 1st quality acrylic distemper (ready mixed ) having VOC content less than 50 gm/litre of approved manufacturer of required shade and colour complete as per manufacturers specification two or more coats over 2 mm thick wall care putty on old surface of wall including preparation of surfaces with complete removal of existing treatment , complete all as specified and directed by GE. |
| 51 | S&F in repair stainless steel curtain rods 20 mm dia including brackets with cut hole suitable for 20 mm dia rod fixed with screws and gutties in wall, including end caps with wall ornament and fixed to curtain rod with screws of design/shape all as directed and as approved by GE. |
| 52 | S&F in repair Steel water tubing, 15mm bore dia, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc including taking down & cleaning for refixing or removal to store, complete all as specified and directed. |
| 53 | S&F in repair Steel water tubing, 20mm bore dia, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc including taking down & cleaning for refixing or removal to store, complete all as specified and directed. |
| 54 | S&F in repair 20 mm dia gun metal ,globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 55 | S&F in repair Vitreous China wash down water closet pan and trap, (pedestal pattern) (Fixing includes bolts, 'P' and 'S' trap and connecting to drain pipe, white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, flushing cistern and also polyethelene flushing pipe) etc complete all as specified and directed. |
| 56 | S&F in repair of PVC 10 Ltr valveless,syphonic action type , flushing cistern, low level, white inlet, ball valve, float and handle including bracket and & supply of flush pipe of polyethylene of low or high density or PVC , 32 mm dia for low level cistern device complete all as specified and directed. |
| 57 | S&F oval (colour as directed) counter top wash basin of size 560 x 470 x205mm incl CP coupling and waste pipe complete all as specified and directed by GE. |
| 58 | S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in pipe complete all as specified and directed by GE. |
| 59 | S&F in repair 15mm bore one way Angle valves, CP fancy type chromium plated screwed both ends for iron pipe or for unions, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) complete all as specified and directed by GE. |
| 60 | S&F in repair bib taps 15mm bore, fancy type chromium plated with butterfly handle, screwed down, high pressure, with carutch or butterfly handle, screwed both ends for iron pipe or for unions including wall flange complete all as specified and directed. |
| 61 | S&F in repair Brass chromium plated mixture for mixing hot and cold water for WHB, screwed down for iron pipe for 15mm dia bore pipe, complete all as specified and directed. |
| 62 | S&F in repair wall mixer 15 mm dia nominal bore chromium plated of approved make, complete with operating handles/levers, wall flanges, nuts, washers and shower outlet connection, suitable for connection to shower line, fixed to the existing hot and cold water supply pipes, including testing for leak-proof performance and smooth operation complete all as specified and directed. |
| 63 | S&F in repair approved quality heavy duty Chromium Plated (CP) brass overhead shower of size 150 mm × 150 mm (square type) with matching CP brass shower arm of suitable length (minimum 300 mm) including all necessary fittings & fixtures, connected to existing 15 mm bore GI water supply pipeline, making watertight threaded joints, testing for leakage, cleaning, polishing and commissioning complete including taking down carefully existing shower and shower arm without damaging the existing GI pipeline, all as specified and directed by GE. |
| 64 | Supply & Fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete including dismantling ols mirror. |
| 65 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, \\"D\\" type, 60cm long between flanges including taking down old towel railrod, complete all as specified and directed. |
| 66 | S&F in repair PVC connections 15mm, 450mm long with PTMT nuts washers etc complete all as specified and directed. |
| 67 | S&F in repair Rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete all as specified and directed |
| 68 | Dismantling of CI/PVC pipe 75 mm bore fixed to wall or laid in floor or trenches inculding connection all as specified and directed. |
| 69 | Dismantling of CI/PVC pipe 110 mm bore fixed to wall or laid in floor or trenches inculding connection all as specified and directed. |
| 70 | S&F PVC (SWR) pipes 75 mm bore dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc, complete all as specified and directed. |
| 71 | S&F PVC (SWR) pipes 110 mm bore dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc, complete all as specified and directed. |
| 72 | S&F PVC (SWR) pipes 110 mm bore dia, single socketed in any length with rubber ring joints fixed to walls on MS brackets, complete all as specified and directed. |
| 73 | S & F 75 mm bore PVC Bends (SWR) with access door, complete all as specified and directed. |
| 74 | S & F 110 mm bore PVC Bends (SWR) with access door, complete all as specified and directed. |
| 75 | S&F CP grating 125mm complete all as specified and directed. |
| 76 | S&F in repair PVC (SWR) Nahani/floor trap of 75 mm dia with CP Grating including jointing with Solvent cement complete all as specified and directed. |
| 77 | S&F in repair PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 78 | S&F PVC (SWR) vent cowl 110 mm dia, complete all as specified and directed. |
| 79 | 75 mm thick PCC 1:2:4 type B-2(using 40 mm graded crushed stone aggregate ), Complete all as specified and directed. |
| 80 | M&L for Chequered cement concrete tiles colour tiles of size 300x300mmx25mm thick or equivalent size as in machine pressed set jointed and pointed in neat cement slurry with grey cement and no pigments, over and including screed bed 20 mm thick in CM 1:4 also complete all as directed by GE. |
| 81 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in coping, finished fair and even including necessary formwork complete all as specified and directed. |
| 82 | M&L for Cement concrete type C-2 1:3:6 using 40 mm graded crushed stone aggregate in surface channels and drains etc. including tred/stopped ends necessary formwork. |
| 83 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, complete all as specified and directed. |
| 84 | Dismantling timber scantling 40 sq cm & over in section, any position in framed work complete all as specified and directed. |
| 85 | All as per item no. 84 in fillets, rails, posts, rafters, purlins, etc under 40 sq. cm in section, any position in unframed work complete all as specified and directed. |
| 86 | Dismantling posts or struts(wood,steel or RCC), any section , including taking out embedded portion embedded in concrete, brick work. Per masonry etc and making good disturbed ground, complete all as specified and directed. |
| 87 | M&L for Cement concrete 1:3:6 type C 2 using 40 mm Graded crushed stone aggs as in foundations, filling and mass concrete complete all as specified and directed. |
| 88 | S&F, Rolled Mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing ( beam, tee, angle, channel, tubular or flat sections) including distance pieces, cleats etc confirming to Fe 410 (gde E-250) quality 'A' , complete all as specified and directed. |
| 89 | S & F Compound girders and stanchions, lattice girders, aerial masts, and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410 (Gde- E-250) quality 'A' , complete all as specified and directed. |
| 90 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc. n exc 10 kg each brackets, conforming to Fe 290 Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel), complete all as specified and directed. |
| 91 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410 (Gde E-250) quality 'A' , complete all as specified and directed. |
| 92 | S&F Mild steel bolts purpose made dia 16 to 20 mm, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15 cm but n exc 22.5 cm long, complete all as specifies and directed. |
| 93 | Dismantling of plain or corrugated steel sheeting,any gauge,thickness,including naintal or similar pattern roof covering, M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws. Sheet colour approved by GE, complete all as specified and directed. |
| 94 | Dismantling of plain or corrugated steel sheeting,any gauge,thickness,including naintal or similar pattern roof covering, S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding/ridges to wall, fixed with self tapping screws complete all as specified and directed. |
| 95 | M&L for cutting into existing manholes for connecting new drains making good to pipe and rendering cutting our existing benching for forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching as reqd for 150/200mm internal dia of pipe. |
| 96 | M&L for pre cast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate), as in landing,cover slab etc including necessary formwork set in cement mortar 1:4 complete all as specified and directed. |
| 97 | M& L for walling of random rubble,uncoursed,well bonded,bedded and solidly hearted,built in cement mortar 1:4, straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed. |
| 98 | All as per serial item no 97 above but except stone, complete all as specified and directed. (Note: Old stone obtained against dismantling/demolition shall be used), all as directed. |
| 99 | M&L for Raised pointing to random or polygonal rubble,uncoursed or brought upto course in CM 1:4, complete all as specified and directed. |
| 100 | Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 101 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed. |
| 102 | Taking down un-serviceable sub main wiring of any type from wall, ceiling etc. complete all as specified and directed. |
| 103 | M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade conforming to IS-694-1990 and including one run of continuous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC concealed / surface casing 'N' capping double lock type to be fixed with the help of rawl plugs & screws ind all fittings such as Tee, connector pieces, L-junction etc on joints including Polycarbonate/ Modular GI sheet Metal flush boxes (as per site requirement) and modular white cover plate with frame for mounting switches, sockets, regulators etc for fixing one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing whitewash colour surface complete all as specified and directed. Notes : (a) Wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour (c) On RCC, non-flexing PVC casing 'n' capping shall be provided on surface with proper fixing clamps all as directed by GE. |
| 104 | Description all as per serial item No 103 above but one 5 pin socket outlet, 5 amps on the same board complete all as specified and directed. |
| 105 | Description all as per serial item No 103 above but one 5 pin socket outlet, 5 amps, independent complete all as specified and directed. |
| 106 | Description all as per serial item No 103 above but for one 5 pin socket outlet 15 Amps on independent board with cables 2.5 sqmm size complete all as specified and directed Note:- Power circuit shall be done in separate circuit. |
| 107 | S&F in replacement ceiling rose, 3 terminal surface type complete all as specified and directed. |
| 108 | S&F in replacement angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 109 | S&F in replacement Modular switch 1 way 6 A 1 module, 240 volts ISI marked complete all as specified and directed. |
| 110 | S&F in replacement Modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed. |
| 111 | S&F in replacement Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. |
| 112 | S&F in replacement Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. |
| 113 | S&F Modular white cover plate 8M complete all as specified and directed. |
| 114 | S&F Modular white cover plate 6M complete all as specified and directed. |
| 115 | S&F Modular white cover plate 3M complete all as specified and directed. |
| 116 | S&F Modular white cover plate 1M complete all as specified and directed. |
| 117 | S&F Modular Fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed. |
| 118 | Supply and fixing LED complete fitting including batten LED polycarbonate 1 x 20 Watt tuberod , appx 4 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.0076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by GE. |
| 119 | Supply and fixing LED complete fitting including batten LED polycarbonate 1 x 10 Watt tuberod , appx 1 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.0076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by GE. |
| 120 | S&F distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directed Note:- Distribution board and MCB's should be same make. |
| 121 | S&F in replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 40 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 122 | S&F of SPN 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 123 | S & F of 415V 10 KA 'C' curve TPN 63 Amp miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 124 | S & F of 415V 25KA 'C' curve TPN 160 Amp MCCB of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 125 | M&L for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sq mm for phase and neutral and one run of 4 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth alongwith PVC conduit will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding. Note: Cutting chases on the wall wherever required is deemed to be included in unit rate quoted. |
| 126 | M&L for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth alongwith PVC conduit will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding. Note: Cutting chases on the wall wherever required is deemed to be included in unit rate quoted. |
| 127 | Supply and fixing Recess mounted slimled luminaires with drop down diffuser light of size 2ft x2ft, 36 watt, 230 volts AC corrosion resistant complete all as specified and directed. |
| 128 | Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5mtr below normal ground level connected to GI wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete with 50mm dia PCC M-10 (Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded crushed stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 40mm bore medium grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost all as directed by GE, (Note GI wire and GI pipe beyond 7.5mtr length shall be measured and paid separately) |
| 129 | Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wallplate with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified and directed. |
| 130 | Supply, fixing & testing 60W LED street light fitting IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewired and suitable fixing arrangement for mounting on MS frame bracket including connecting the fitting complete all as specified and directed including taking down |
| 131 | S&F Single pole and neutral enclosure with 1 two pin and earth plug and a socket complete with one single pole MCB, 20 Amp, 240 volts ISI marked complete all as specified and directed. |
| 132 | Disconnecting/ Taking down Ceiling Fan of any sweep and deposited to MES store yard and S&F ceiling fan 1200 mm sweep BLDC type complete all as specified and directed. |
| 133 | Disconnecting old unsv water heater and deposited to mes store yard and S&F water heater 25 Ltr capacity complete all as specified and directed. |
| 134 | Disconeting old unsv exhaust fan and deposited to MES store yard and S&F Exhaust fan PVC body 250 mm dia complete all as specified and directed. |
| 135 | S&F Sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way including MCCB 125 Amp as Each incommer (where MCB are to used) complete with suitable size of bus bar complete fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down old DB complete all as specified and directed. |
| 136 | Supplying laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volta grade with stranded aluminium conductor of size 25 Sqmm, 3.5 core flat cable complete all as specified and directed. |
| 137 | Excavation in trenches n exc 1.5 m wide and n exc 1.5 mtr in depth for foundation laying of under ground cable erecting of pole stay not exc 10 sqm on plain and not exc 1.5 m depth and getting out in any type of soil complete all as specified and directed. |
| 138 | Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exc 25cm in any type of soil complete all as specified and directed. |
| 139 | Removal of excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 140 | M&L for sand cushioning to under ground cable with a layer of sand 8cm before laying the cable and 15cm after laying the cable (10cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed. |
| 141 | M&L for sub class 'B' brick old size protection cover laid dry flat transversally along the length of cable on cushioning with width equal to the length of brick complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender