Tender For Special Repairs To Radiology Department At Iam Under Ge (Af) Marathahalli
Tender Value
30.49 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
17 days left
EMD
61000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Radiology Department At Iam Under Ge (Af) Marathahalli
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed . |
| 2 | S & F Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 3 | S & F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified |
| 4 | S & F Powder coated Anodised aluminium window and ventilator shutters, fixed type three track windows two glass and one wire mesh shutter without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified Note : Glass pane and SS wire mesh shall be measured and paid separately in supply only item. |
| 5 | S & F Brass 4 lever Mortice lock, vertical type, size 100 mm complete all as specified and directed. |
| 6 | S & F in repairs Powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per directed and specified. |
| 7 | S & F 5.50 mm sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq m Each pane all as specified and as directed |
| 8 | S & F 12 mm thick veneered particle board interior grade , solid core, general purpose type, with face veneers of type BB fixed with screws to aluminium frame work etc, with decorative face veneers both faces complete all as specified and directed. |
| 9 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) not exceeding 1.5 Sqm each complete all as specified and directed . |
| 10 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 11 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 12 | S & F of 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed. |
| 13 | Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section all as specified |
| 14 | Supply and fixing 150 mm long extruded alluminium alloy handle, cast type, anodized all as specified |
| 15 | S & F 25 mm dia aluminium anodised powder coated type tubular curtains rod including fixing brackets, stops, rollers etc complete all as specified and directed. |
| 16 | S & F Floor door of stopper aluminium alloy body and tongue, 150 mm overall length, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed |
| 17 | S & F in repairs of armstrong ceiling system complete with 12 mm thick ceiling boards ( 84% light reflectence ) and powder coated GI frame work with section not less than 0.7 mm thick all as per manufure instructions all as specified and directed. |
| 18 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above GL) all as specified and directed. |
| 19 | M & L for PCC 1:2:4 type B1 using 20mm graded aggregate 40mm thick as in sub base or levelling course etc complete all as specified and directed. |
| 20 | M & L for Double Charged Vitrified Ceramic Colour tiles 9 to 10 mm thick light shade(Square / Rectangular) polished , area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:4 complete all as specified and as directed . Make : Somany, Johnson, AGL, Kajaria |
| 21 | Ditto as item above but as in skirting over cement mortar backing plaster in CM1:3 10 mm thick including dismantling of wall tiling of any thickness ncluding cement mortar bedding ( but not backing) removing tiles and rubbish off the premises.complete all as specified and directed. Make : Somany, Johnson, AGL, Kajaria |
| 22 | M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick of size 300mmX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15 mm thick in 1:4 complete all as specified and as directe. Make : Somany, Johnson, AGL, Kajaria |
| 23 | M & L for glazed ceramic coloured tiles with border tile pattern in vertical surfaces 350 x 250 x 7 mm / 450 x350 x7 mm / 300 x 450 x 7 mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10 mm thick cement plaster in 1:3 as backing coat including dismantling of wall tiling of any thickness ncluding cement mortar bedding ( but not backing) removing tiles and rubbish off the premises complete all as specified and as directed. Make : Somany, Johnson, AGL, Kajaria |
| 24 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform Laid, bedded and pointed in any mortar etc all as specified and as directed. |
| 25 | M & L 25 mm thick PCC 1:2:4 type B0 (12.50 mm aggregate ) as level course finish even and rough to receive floor tiles complete all as specified and directed. |
| 26 | M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than .034 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for Kota stone slab 15mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10mm thick CM (1:4) to receive Kota Stone complete all as specified and directed by Engr-in-Charge.. |
| 28 | M & L for 20 mm thick Granite (of any type) tiles machine cut,bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 20 mm thick screed bed in CM 1:4 including grinding and polishing complete all as specified and directed. |
| 29 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 30 | S & F PVC waste pipe, 32 mm dia, 750mm long, suitable for wash basin fixed in repairs all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware |
| 31 | S & F Chromium plated fancy type aerated bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed. |
| 32 | S & F stop valves/angle cocks or two way angle cock cast copper alloy concealed type long body with round operating knob fency type chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule. |
| 33 | S & F chromium plated shower rose with swivel joints including fixing to GI pipe for 125mm dia |
| 34 | S & F 15mm bore aerated pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 35 | S& F CP brass aerated mixer 15mm bore any type(wall, basin, sink) all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware |
| 36 | S & F chromium plated toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 37 | S&F in repair 20 mm dia D type CP towel rail 600 mm long between flanges complete all as specified and directed. |
| 38 | S & F glass shelf assembly consisting of 5.5 mm thick sheet glass shelfd 12 cm wide wioth chromium placted racket guard and railing 60 cm long complete all as specified and directed. |
| 39 | S & F Vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket |
| 40 | S & F Vitreous China wash down water closet (European type) (floor hung (pedestal pattern) white complete excluding flushing cistern and flush pipe and trap white including fixing bolts,WC seat cover of fixed with aluminium or ms chromium plated complete all as specified. |
| 41 | S & F PVC connections 600 mm long between ends with 2 Nos. brass nuts and washers, 15mm size, fixed in repairs, all as specified and as directed. |
| 42 | S & F in repairs 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed all as specified and as directed. |
| 43 | S&F in repairs 32mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed all as specified and as directed. |
| 44 | S & F in repairs 40mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed all as specified and as directed. |
| 45 | S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed. |
| 46 | S & F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed. |
| 47 | S & F in repairs PVC bends of 110 mm dia complete all as specified and directed. |
| 48 | S & F in repairs PVC bends of 75 mm dia complete all as specified and directed. |
| 49 | S & F PVC bends of 110 mm dia complete all as specified and directed. |
| 50 | S & F PVC bends of 75 mm dia complete all as specified and directed. |
| 51 | S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cementbends of 75 mm dia complete all as specified and directed. |
| 52 | S & F PVC (SWR) vent cowl fixed to 110mm bore of pipes all as specified and as directed. |
| 53 | S & F PVC (SWR) vent cowl fixed to 75mm bore of pipes all as specified and as directed. |
| 54 | S & F Stainless steel gratings with frame, 100 mm dia, with/without hole for waste pipe connection all as specified and as directed. |
| 55 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 56 | Taking down cement plaster on brick work or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 57 | M & L for two layer (15 mm thick ) Rendering of top layer 5 mm thick with WPC over a 10 mm thick base layer rendering in CM 1:4 on concrete masonary or surfaces other than fair face of brick work finished fair and even without using extra cement.Note WPC shall be measured and paid separetely in supply only item. |
| 58 | M & L for rendering 10 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed. |
| 59 | M&L for preperation of newly plastered surfaces of walls and applying two coats of oil bound distemper on wall surfaces over a coat of alkali resistant primer over 1.5 mm thick wall care putty complete all as specified and directed. |
| 60 | M & L for applying two or more coats of 100% premium acrylic emulsion paint ( 200 micron ) having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over newly plastered surfaces of wall surfaces complete all as specified and as directed. |
| 61 | M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper on wall surfaces over a coat of alkali resistant primer over 1.5 mm thick wall care putty complete all as specified and directed. |
| 62 | M&L for preperation of old decorated surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and effloroscent salts, oil and gresy spots and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and directed. |
| 63 | M & L for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint ( 200 micron )having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over wall surfaces over a coat of alkali resistant primer complete all as specified and as directed. |
| 64 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 65 | Removing material or debris retrives from above demolition or cleaning to a distance exceed 1.5 Km and not exceeding 5.0 Km and depositing where directed complete all as specified and directed |
| 66 | S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.complete all as directed and specified. |
| 67 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles in all as specified |
| 68 | M & L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) in PCC 1:3:6 type C1 using 20mmgarded aggregate and setting in mortar 1:6 complete, in walls complete all as specified and directed. |
| 69 | Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed |
| 70 | Supply only 4 mm sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m Each pane all as specified and as directed |
| 71 | Supply only 4 mm sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq m Each pane all as specified and as directed |
| 72 | Supply only 4mm thick figured galss, pin head type as in louvers, fixed glazing not exc 0.5 Sqm in each pane |
| 73 | M&L in repairs for 17/18 mm thick Plywood, grade BWP, type BB, fixed with screws to timber frame work as in cupboards , partition, kitchem cabinets, shutters, shelves etc, fixed with screws to timber frame work a etccomplete all as specified and as directed. |
| 74 | M & L 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions |
| 75 | S & F of 125 mm Brass handles , cast type polished bright complete all as specified and directed. |
| 76 | S & F nickel plated slip on cupboard/ cabinet hinges suitable for shutters of thickness 15 to 22mm complete all as specified and as directed. |
| 77 | M&L second class hardwood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads n exc 3 Sqcm |
| 78 | M&L for 2 lever brass locks, Cupboards, grade I, size 50mm |
| 79 | S & F of CP Health faucet ( ABS body) mild steel chromium plated suitable suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified.(hand shower) complete set with 1.5 mtr long pipe abd fittings complete all as specified and as directed. Make Cera, prayag, jaquar and equivalent |
| 80 | S & F in repairs including dismantling and removing to store etc, exc 500 & n exc 1000ltr cpsacity and fixing 1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 81 | S & F in repairs including dismantling and removing to store etc, exc 500 & n exc 1000ltr cpsacity and fixing 500 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 82 | Material and labour for prepration of old wood or wooden based surfaces or perviously treated surfaces,not otherwise described,over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed |
| 83 | M & L for preparation of new steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer completed all as specified and directed. |
| 84 | S & F in repairs Ball valves high 25mm bore pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) |
| 85 | Supply & Fix in repairs only PVC low level flushing cistern, 10 litres capacity, with chromium plated brass inlet and outlet connections including provision of PVC brackets, PVC flush pipe with bend 32 mm dia of suitable length and making necessary connections to water supply pipe line all as specified and as directed. Make : Jaquar , Hindware. Cera, Parryware. |
| 86 | Taking down carefully copper/aluminum sub main wiring of any size including casing and caping / conduit and making good the disturbed surface of walls as directed. |
| 87 | Taking down carefully copper/aluminium point wiring of any type of batten or conduit (Light, Fan, Socket or power) complete removing material from site and making good the disturbed surfaces of walls, roofs etc including two coats of white/colour washing/distempering etc to match the existing complete all as directed. |
| 88 | Taking down carefully DB box including mcb, mccb of any size and any type complete all as specified and directed. |
| 89 | Taking down ceiling fan/exhaust fan,sealing cable end,dismantling blades and removing fan and handing over to MES store complete all as specified and directed |
| 90 | M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the following:- (a) One light point /Fan point controlled by one switch. |
| 91 | (b) One 5 Amps socket point on independent board. |
| 92 | (c) All as per item No.05 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board . |
| 93 | (d)All as per item No.05 above but wiring complete with 4 Sqmm for AC point |
| 94 | Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed |
| 95 | S & F modular socket 06 Amps 2/3 pin, 2 module complete all as specified & directed. |
| 96 | Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed |
| 97 | S & F modular socket 06/16 Amps 2/3 pin 2 module complete all as specified & directed. |
| 98 | Supply and fixing 35/36 W LED Fitting, 2 x 2 recess / Surface LED flat panel with high brightness LED for glare free (shadow less) homogenous illumination including LED driver complete all as specified.(Make : Havells / CG / Bajaj) |
| 99 | S&F in repair LED PC batten light fitting of 4 feet 20 watt, with energy efficient LED and integrated electronic driver of 20W fitting including connecting up with three core flexible copper conductor upto ceiling rose complete all as specified and directed. |
| 100 | S&F Lumiline LED tube with box type fitting , 2 feet, 10 watts alongwith tube complete all as specified and directed. Make : Bajaj /CG/Philips/Havells |
| 101 | S&F Celing Fan BLDC complete with blades, electronic regulator antisuicidal rod and acessories , 230 volts, 1200 mm sweep , min air delivery 1200 CFM with service value 6.00 BEE five star rated with brushless direct current motor complete all as specified and directed. |
| 102 | Supply and fix exhaust fan, sturdy engineering plastic AC single Phase. 230V of size 300mm sweep heavy duty with, blades, and frame and louvers complete all as specified and directed. |
| 103 | S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge. |
| 104 | Supply and fix ceiling rose suarface bakelite three terminals 65x50mm complete all as specified. |
| 105 | S & F MCB SPN 32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed. |
| 106 | S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed. |
| 107 | S & F MCB DB SPN 8 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed. |
| 108 | S & F MCCB DB Vertical TPN 4 way 'A' frame,including MCCB TPN 63 Amp breaking capacity 16 KA- 02 nos, double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match complete all as specified and directed. Make- Havells or equivalent |
| 109 | M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 1x 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. Please Enable Macros to View BoQ information |
| 110 | M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 1x 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender