Defence Statutory Bodies & Commissions/Committees Closing in 24 days TDR #58605289

Tender For Special Repair Of Otm Bldg No T-05 At Bareilly Cantt Under Ge (West) Bareilly

Issued by Statutory Bodies & Commissions/Committees · Bareilly, Uttar Pradesh
Tender Value
68.96 Lakhs
Estimated cost
Bid Submission
16 Dec 2026
24 days left
EMD
1.28 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair Of Otm Bldg No T-05 At Bareilly Cantt Under Ge (West) Bareilly

BOQ

Name of Work:- SPECIAL REPAIR OF OTM BLDG NO T-05 AT BAREILLY CANTT UNDER GE (WEST) BAREILLY
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: SPECIAL REPAIR OF OTM BLDG NO T-05 AT BAREILLY CANTT UNDER GE (WEST) BAREILLY Contract No : CWE / BLY / GE (W) /144 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified.
3Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete as directed and specified.
4Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.
5Demolition of brick work built in cement mortar complete all as specified and directed.
6Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.
7Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.
8M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in (1:6) including of brick work in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
9Removing Cement mortar or cement lime mortarr from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed.
10All as per item no 7 above but except bricks complete all as specified and directed.
11M&L for 15mm thick rendering on internal surface in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed.
12M&L for 15 mm thick rendering on external surface on fair faces of brick work or concrete surfaces in two layers consisting of Ist layer in C M 1:6 and top layer 5 mm th. in C M 1:4 mix with approoved water proofing compound complete all as specified and directed.Note:- Water proofing copound shall be measured and paid separately.
13Supply only liquid water proofing compounding complete all as specified and directed.
14M&L for applying two coat of oil bound distemper white or tinted over one coat of primer on newly decorated or undecorated wall surface including preparation of surfaces and applying 1 mm thick putty by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and directed.
15M&L for preparation of new plastered walls surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and including 1mm thick white putty over new surfaces. over a coat of primer complete all as specified and directed.
16M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceediding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick bedding layer of cement mortar 1:6 complete all as specified and directed.
17M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceediding 0.18 sqm, in wall , skirting & dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick plastering of cement mortar 1:4 complete all as specified and directed.
18M&L for 7 to 8 mm thick (Glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering/backing layer in cement mortar 1:4 complete all as specified and directed.
19M&L for 16-18 mm thick Granite of Z-black in colour (table rubbed and polished) as in windows cill, door cill, gate pillar/post & cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed.
20M&L for 75 mm thick cement concrete 1:3:6, type C1, with using 20 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 mtr and every change of direction and filling the same with bitumen filler/filler boards 1:3 by weight complete all as specified and directed.
21M&L for 400x400 mmx (10 to 12 mm thick) out door vitrified anti skid coloured tiles in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM-1:6, including dismantling of existing tiles complete all as specified and directed.
22Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick,complete all as specified and directed.
23M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in slab supported on wall, beams and columuns in floors, roofs LANDING, balconies,canopies,deck slab and shelves, Chajjas and stair case etc complete all as specified and directed.
24form work to side and soffits of floor or roof beam ,beam hauching, girder, bressummer, lintel, canteliver, shelves including support, overhaning etc also splay between floor and beam complete all as specified and directed.
25M&L for RCC type B1 1:2:4 (20mm grade stone aggregate ) beams ,cantilever ,bressummers,lintel complete all as specified and directed.
26Form work to chullah hoods,chajjas,trough and similar item including edge flat surface of concrete complete all as specified and directed.
27M&L for mild steel TMT bar 5 mm and over dia in stirrups, spacers , and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
28M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
29S&F 105mmx60mmx1.25 mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed.
30S&F 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, double badam etc, complete including wooden texture finished paint on the frame surface complete all as specified and directed
31S&F steel windows with pressed steel frame (size 95mm x 456 mm x 1.25mm) side hung shutter including box types hinge with steel handle , and steel pegs steel complete with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar (open in side )dovetails or welded complete all as specified and directed and all as per Drg NO TD/088 Dt 07 jan 2002 Note:-(a)tow shutter is wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unite . (b)rate for filling of pcc in frame deemed to be included in quote rate.(c) ms grill shall be measured and paid Excluding/ separately under relevant item of schedule
32S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks and similar work confirming to Fe -290 Gde-E-165 all as spd and directed .
33S&F Sheet glass 3MM thick,ordinary quality and glazing with oil putty in squaren exc 0.5sqm in each pane Including glazed with putty or fixed with beads complete all as specified and directed.
34M&L for 4 mm thick E board classic tiles for insulation and accoustic purpose 60X60 cm with and including powder coated galvanium iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling and making good disturbed surface complete all as specified and directed .
35S&F for 30 mm thick factory made wooden Flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .
36M&L for 35mm thick plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, without sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, of 2nd class hard wood , members of shutters as specified in SSR Part - I windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) fitted to chowkats complete all as specified and directed.
37S&F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.
38M&L for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applyingne two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
39M&L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coat of synthetic enamel paint over coat of red oxide primer complete all as specified and directed.
40S&F in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
41S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed.
42S&F 150 mm size aluminium handles, cast type anodised completed all as specified and directed.
43S&F stainless steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.
44S&F 250 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed.
45S&F Rotational moulded polyethylene water storage tanks(tripple layer and white in colour) of 1000 Litre capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.
46S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
47S&F 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe omplete all as specified and directed.
48S&F 15 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe omplete all as specified and directed.
49S&F GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling (concealed) or laid in floors and connections complete all as specified and directed.
50S&F GI tubing of 20 mm dia, medium grade with all fittings and fixed to walls or ceiling (concealed) or laid in floor and connectionscomplete all as specified and directed.
51S&F vitreous China wash basin with pedestal white , flat back, angle back any size 580x450mm including cutting for and pinning in end of brackets or erecting stand waste coupling of PTMT ( HALF or full threaded ) minimum weight ( 32mm-42gms/40mm-60gms ) brass waste pipe, chain and plug and porcelain stopper brackets complete all as specified and directed.
52S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified and directed.
53S&F 15 mm dia bore PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.
54S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.
55S&F chromium plated brass tubular towel rail 20 mm dia, D type 60cm long between flanges complete all as specified and directed.
56S&F Grating round 140 mm size of PTMT (Minimum weight 50gms ) complete all as specified and directed.
57S&F of PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting PVC pipes alongwith fittings and accessories complete all as specified and directed.
58S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
59S&F 110 mm bore PVC (SWR) T bend any radius ( if provided with access door) complete all as specified and directed.
60S&F of 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified and directed
61S&F of 20 mm dia SS 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate size in each end & intermediate support complete all as specified and directed.
62Dismantling asbestos cement (corrugated,semi corrugated etec ) sheets in roof covering complete all as specified and directed.
63S&F Pre -painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an color having tensile strength of 550 MPa as in roof covering /cladding to wall ,fixed with self tapping screws complete all as specified and directed..
64S&F Pre -paited galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an color having tensile strength of 550 MPa as in roof covering /cladding to wall ,fixed with self tapping screws complete all as specified and directed.
65S&F rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed.
66S&F rolled mild steel section as roof trusses (framed) ,trussed,purlin,crane gantries,rails and fastening and heavy bracket framing (beam,tee,angle, channel or flat section ) including distances pieces cleats etc GRADE FE 410-w(gde-E-250) quality A complete all as specified and directed..
67M&L Galvalised mild steel wire netting of chicken wire mesh 0.46 mm nominal dia of wire & 10 mm mesh size complete all as specified and directed.
68M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.
69Extra for forming fair finished drain or channels 30cm inner girth in cement concrete , using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified
70Add to or deducted in Srl Item No 68 for each 25mm girth or part thereof over or under 30cm complete all as specified and directed
71S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, INCLUDING wate pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
72Surface excavation in soft/ loose soil not exc 30cm deep and avg 15cm deep and getting out complete all as specified and directed.
73M&L for hard core broken bricks of gauge not exc 63mm deposition ,spread and levelled in layered not exd 150mm thick watered and rammed to a true surface of broken stone or boulders etc complete all as specified and directed.
74M&L for machine pressed with grey cement and pigment factory made coloured glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade, machine pressed of pattern and colour as approved by GE complete all as specified and directed.
75M&L for PCC tpye B1 1:2:4 (40 mm graded stone aggregate) in wall or retaing wall, any thickness, size or shape including pilaster, butteresses column, pillars boundary pillar and edging coping (including caps and bases) complete all as specified and directed.
76M&L for PCC types C2 1:3:6 (using 40 mm grade stone aggregate) as in foundation , filling and mass concreting complete all as specified and directed.
77M&L for 75 mm PCC 1:4:8 type D-2 (40 mm graded stone aggregate) as in floor complete all as specified and directed.
78Demolition timber scantling 40sq cm and over and rafter, ridge etc in any position complete all as specified and directed.
79Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan/ bell/ socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed.
80M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H ,new concealed PVC conduit medium grade not less than 20 mm dia ,conduit fittings and all accessories with suitable size of anodised1.2 mm thick GI metal flush box, for mounting of Modular switches, sockets, fan regulator etc,including modular flush box, modular frame and modular white cover plate as top cover, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of the following. Note: (a) Colour code shall be maintained as per IE rule:-(a) One light / ceiling fan/ exhaust fan/ bell point controlled by one switch.
81(c) One 3 pin 5 Amp socket out let point controlled by one switch on same board complete all as specified and directed.
82(b) One 3 pin 5 Amp switch socket out let point on an independent board complete all as specified and directed.
83All as per item 79 here in before but for one 15 Amp socket out let independent board (one circuit for one point only) with 2.5 Sqmm (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm PVC copper conductor single core used as earth continuity conductor complete all as specified and directed.
84S&F modular switch one way 6 A, 1 Module SP 230 V AC complete all as specified and directed.
85S&F modular switch one way 16 A, 1 Module SP 230 V AC complete all as specified and directed
86S&F modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed.
87S&F modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed.
88S&F ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.
89M&L for sub main wiring with two single core 6.0 Sqmm (FRLS-H) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLS-H) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. (Note :- Two runs of 6.0 sqmm and one run of 6.0 sqmm copper conductor shall be measured as one unit length.)
90Taking down carefully TPNDBs/ Main Switch/ SPN DBs with MCC, MCB & Kit kat fuse etc including all accessories for taking credit and making good disturbed surface to match the existing complete all as specified and directed.
91S&F in replacement and Testing TP & N Vertical load line (VTPN) 4 way 415 Volts 50 HZ indoor type double door sheet metal enclosure IP-54 DBs IK-09 flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties, lugs for cable Management for Prown of MCCB as in comer including connecting terminal strip complete and SPTP MCBs as out going etc complete pre wired with suitable size copper conductor. The DB's shall hold type test certificate as per IEC 61439-3 complete all as specified and directed.
92S&F in replacement sheet metal enclosures 240 volt with 100 amps rated copper bus bar for double door 8 way DB's with protection IP-43-IK-09 with acrylic Door suitable for one MCB SPN as incoming and 6 MCB SP as out going for mounting flush on wall and making good disturbed surfaces complete all as specified and directed.
93S&F MCB double pole 240 Volt 10 KA 40-63 Amp 'B' series conforming to IS marked complete all as specified and directed.
94S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series conforming to IS marked complete all as specified and directed.
95S&F MCCB 415 Volt 16 KA 4 pole 100 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.
96S&F LED Batten (4 feet) with aluminum extruded channel(housing) and Polycarbonate diffuser for glare free light with input power 20 Watt , system efficiency not less than 100lm/watt with built in surge protection not less than 2.0 KV with accessories like both side end cap, driver, holder,screw including LED light with three core flexible sheathed copper conductor cable of suitable size to connect with ceiling rose complete all as specified and directed.
97S&F in replacement of LED Bulkhead Light with aluminum housing and polycarbonate opal diffuser with input power 10 Watt, IP-65, system efficiency not less than 100lm/watt & built in surge protection not less than 2.0 KV with accessories connecting up with three core flexible sheathed copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
98S&F ceiling fans complete with aluminum blades, down rods, fan regulator with Conduit wiring accessories 230 V 1200mm sweep with Air delivery not less than 210 CMM and Five Star Rated with Bussiness Direct Current(BLDC) Motor complete all as specified and directed.Note :- (i) Rate shall deemed to be included for taking down, Dismantling handling arrangements and writing MES nos on ceiling fan along with transportation upto EM store yard
99S&F GI tubing 50 mm bore heavy grade ISI marked for fixing on walls including PCC 1:3:6 type C-1 for grouting ends of pipe & all fittings for hangers of ceiling fans complete all as specified and directed.
100M&L for fan hook made out of MS flat 50x6 mm suitably shaped to mount on 40 mm dia GI pipe including welded MS bar 10 mm dia half round shaped & necessary nuts & bolts complete all as specified and directed.
101M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round and using 4 mm dia GI earth lead wire as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch control board at another end. GI earth lead protected with & including 15 mm dia GI medium grade pipe from upper end of earth plate upto equipment and including 20 mm dia bore GI pipe medium grade as water pipe and chamber to upper edge of the earth plate. GI funnel with wire mesh fixed on water pipe and PCC pit provision of PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate as per cover 50 mm thick of precast RCC 12.4 type B-1 (using 20 mm graded stone aggregate as per electrical plate No.3 of SSP Part-I/2010 and testing on completion all as specified and directed.
102S&F in replacement Integral LED Street Light Luminaire comprising of high pressure die cast aluminum housing heat resistant toughened glass with frame IP-66 protection road way luminaires with high power LED 25 watt with efficiency 120 lumen/watt at system level, with average life class 50,000 burning hours including GI bracket made out of 25 mm GI pipe medium grade and MS clamps for fixing of light fitting including connection with twin core PVC insulated copper flexible cable with existing point completion all as specified and directed.
103Taking down old unserviceable LT cable of any size type including deposite materials to store for keeping in safe custody or taking in credit and making good disturbed surfaces complete all as specified and directed.
104Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.
105Excavation in trenches not exc 1.5 m in depth and not exc 1.5 mtr wide including getting out in soft/loose soil complete all as specified and as directed.
106Returning filling in including levelling spreading watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.
107Removing of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
108M&L for sand cushioning over and below the U/G cable laid (total depth of sand shall be 23cm punned till 18 cm) complete all as specified and directed. Note : Punned thickness will be considered for measurement
109M&L for providing old size sub class 'B' bricks laid perpendicular to the cable abutting each other complete all as specified and directed.
110M&L in replacement 50 mm bore dia GI tubing 'light grade' with all necessary fittings laid in trenches/ under road crossing/ fixed on pole/ wall/ under floor including suitable mild steel FI clamps of required size complete all as specified and directed.
111M&L for boring holes (manually) under road, hard standing, without damaging surface for 50 mm dia GI pipe etc complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58605289
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 68.96 Lakhs
LAST DATE 16-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair Of Otm Bldg No T-05 At Bareilly Cantt Under Ge (West) Bareilly
Basic Detail
Tender No 8100/B/999/E8
Bidding Type Tender
Location
City Bareilly
State Uttar Pradesh
Key Dates
Publish Date 18 Nov 2026
Submission Date 16 Dec 2026
Open Date 23 Dec 2026
Finance
Tender Value 68.96 Lakhs
Tender Fee 1000
EMD 1.28 Lakhs
Exemption Available
Document List
2a90e470-1886-4046-9882-c7f80c6abe62.html
BOQ_896782.xls
PS_144.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 16, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 24 days
Dec 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 31 days

Tender Documents

Download All (ZIP) ↓
html

2a90e470-1886-4046-9882-c7f80c6abe62.html

xls

BOQ_896782.xls

pdf

PS_144.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender