Water Resources and Irrigation Government Departments Closing in 10 days TDR #58605250

Tender For Reinforcement Of Gopa-Ii Rl, Satakhanda-I Rl, Satakhanda-Ii Rl, Pathapur-Iv Rl, Pathapur-V Rl & Kuspangi-Iii Rl L.I. Projects Of Banki Block In Kataka District Under State Plan 2026-27(Ren)

Issued by Government Departments · Cuttack, Odisha
Tender Value
55.35 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
10 days left
EMD
55358
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Reinforcement Of Gopa-Ii Rl, Satakhanda-I Rl, Satakhanda-Ii Rl, Pathapur-Iv Rl, Pathapur-V Rl & Kuspangi-Iii Rl L.I. Projects Of Banki Block In Kataka District Under State Plan 2026-27(Ren)

BOQ

Name of Work:- REINFORCEMENT OF GOPA-II RL, SATAKHANDA-I RL, SATAKHANDA-II RL, PATHAPUR-IV RL, PATHAPUR-V RL & KUSPANGI-III RL L.I. PROJECTS OF BANKI BLOCK IN KATAKA DISTRICT UNDER STATE PLAN 2026-27(REN)
Sl. No. Item Description
1GOPA-II RL:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
2Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
3Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
4Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
5C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
6Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
7Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
8Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
9Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
1012mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
11Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
12White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
13Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
14Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
15Cost of Foundation Nut bolt including labour charges for fitting at work site including cost of T&P required, transportation to site from, cess etc complete except GST as per direction of Engineer-in-Charge.
16Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
17Labour charges for fitting of Sluice valves & / NRVs along PVC Pipe line & / lifting &/ lowering of pump sets including cost of labour, welding works with consumables, T&P required, transportation to site from site stock yard, cess etc complete except GST.
18Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
19Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
20Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
21Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
22Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
23Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
247.5 HP Submersible motor pump of 25 mtr head with 900 LPM discharge of reputed brand with BEE Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm flat cable and Impeller: Bronze grade LTB-2 of IS 318/1981 as per IS specification including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
253x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
264.00mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
27Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
284.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
29100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
30Labour charges for laying and fitting of 100 mm dia G.I. pipe complete including cost of labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
31Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
32Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
33160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
3450mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
35160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
36Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
37Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
38Labour charges for slotting of 200mm dia PVC (ASTM-D)Sch.-80 Pipe including cost of transportation, cess etc. except GST as per direction of Engineer-in-Charge.
39Supply and fitting of 200mm dia PVC threaded cone including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
40Supply and fitting of 200mm dia PVC threaded Well cap including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
41Supply and fitting of 200mm dia PVC threaded Nipple including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
42Providing of 200 mm dia PVC well casing as per ASTM-D-1785/2004 ( Schedule -80) blue in colour having specific gravity of the materials of the pipe 1.40 to1.46 gms/cc straight length of 3 mtrs PVC Pipes including entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site with loading and unloading,storage at site, watch and ward etc. including all tax and cess etc complete except GST till completion of project work and handing over to Panipanchayat all complete with due approval of authority as per direction of Engineer-in-charge.
43Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion including cost of T&P, transportation and cess etc complete. Drilling for 200 (8”) dia pipe: From 0 mtr. to 100th meters
44Supply of all Labour & T&P for lowering 200mm dia PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above including cost of fitting & joining materials, cost of T&P, transportation of T&P and cess etc complete as per direction of Engineer-in-Charge.
45Supplying all materials,Labour T & P for packing the bore with washed gravel size (as per advice of Engineer-in-Charge) arround the well screen and pipes in good quality including cost of gravel, transportation, cess, royality,etc complete as per direction Engineer-in-charge. (Example: For 50m depth) =0.786 x (0.4² - 0.2²) x 50mtr = 4.716 say 4.7 cum
46Threading charges of 200mm dia. ASTM(Sch.80) pipes including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
47Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour including cost of T&P, transportation of T&P and cess etc complete as per the direction of Engineer-in-charge.
48SATAKHANDA-I RL:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
49Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
50Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
51Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
52C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
53Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
54Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
55Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
56Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
5712mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
58Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
59White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
60Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
61Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
62Cost of Foundation Nut bolt including labour charges for fitting at work site including cost of T&P required, transportation to site from, cess etc complete except GST as per direction of Engineer-in-Charge.
63Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
64Labour charges for fitting of Sluice valves & / NRVs along PVC Pipe line & / lifting &/ lowering of pump sets including cost of labour, welding works with consumables, T&P required, transportation to site from site stock yard, cess etc complete except GST.
65Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
66Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
67Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
68Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
69Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
70Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
717.5 HP Submersible motor pump of 25 mtr head with 900 LPM discharge of reputed brand with BEE Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm flat cable and Impeller: Bronze grade LTB-2 of IS 318/1981 as per IS specification including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
723x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
734.00mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
74Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
754.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
76100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
77Labour charges for laying and fitting of 100 mm dia G.I. pipe complete including cost of labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
78Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
79Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
80160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
8150mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
82160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
83Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
84Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
85Labour charges for slotting of 200mm dia PVC (ASTM-D)Sch.-80 Pipe including cost of transportation, cess etc. except GST as per direction of Engineer-in-Charge.
86Supply and fitting of 200mm dia PVC threaded cone including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
87Supply and fitting of 200mm dia PVC threaded Well cap including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
88Supply and fitting of 200mm dia PVC threaded Nipple including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
89Providing of 200 mm dia PVC well casing as per ASTM-D-1785/2004 ( Schedule -80) blue in colour having specific gravity of the materials of the pipe 1.40 to1.46 gms/cc straight length of 3 mtrs PVC Pipes including entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site with loading and unloading,storage at site, watch and ward etc. including all tax and cess etc complete except GST till completion of project work and handing over to Panipanchayat all complete with due approval of authority as per direction of Engineer-in-charge.
90Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion including cost of T&P, transportation and cess etc complete. Drilling for 200 (8”) dia pipe: From 0 mtr. to 100th meters
91Supply of all Labour & T&P for lowering 200mm dia PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above including cost of fitting & joining materials, cost of T&P, transportation of T&P and cess etc complete as per direction of Engineer-in-Charge.
92Supplying all materials,Labour T & P for packing the bore with washed gravel size (as per advice of Engineer-in-Charge) arround the well screen and pipes in good quality including cost of gravel, transportation, cess, royality,etc complete as per direction Engineer-in-charge. (Example: For 50m depth) =0.786 x (0.4² - 0.2²) x 50mtr = 4.716 say 4.7 cum
93Threading charges of 200mm dia. ASTM(Sch.80) pipes including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
94Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour including cost of T&P, transportation of T&P and cess etc complete as per the direction of Engineer-in-charge.
95SATAKHANDA-II RL:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
96Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
97Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
98Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
99C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
100Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
101Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
102Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
103Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
10412mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
105Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
106White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
107Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
108Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
109Cost of Foundation Nut bolt including labour charges for fitting at work site including cost of T&P required, transportation to site from, cess etc complete except GST as per direction of Engineer-in-Charge.
110Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
111Labour charges for fitting of Sluice valves & / NRVs along PVC Pipe line & / lifting &/ lowering of pump sets including cost of labour, welding works with consumables, T&P required, transportation to site from site stock yard, cess etc complete except GST.
112Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
113Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
114Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
115Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
116Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
117Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
1187.5 HP Submersible motor pump of 25 mtr head with 900 LPM discharge of reputed brand with BEE Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm flat cable and Impeller: Bronze grade LTB-2 of IS 318/1981 as per IS specification including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
1193x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
1204.00mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
121Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
1224.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
123100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
124Labour charges for laying and fitting of 100 mm dia G.I. pipe complete including cost of labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
125Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
126Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
127160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
12850mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
129160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
130Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
131Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
132Labour charges for slotting of 200mm dia PVC (ASTM-D)Sch.-80 Pipe including cost of transportation, cess etc. except GST as per direction of Engineer-in-Charge.
133Supply and fitting of 200mm dia PVC threaded cone including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
134Supply and fitting of 200mm dia PVC threaded Well cap including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
135Supply and fitting of 200mm dia PVC threaded Nipple including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
136Providing of 200 mm dia PVC well casing as per ASTM-D-1785/2004 ( Schedule -80) blue in colour having specific gravity of the materials of the pipe 1.40 to1.46 gms/cc straight length of 3 mtrs PVC Pipes including entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site with loading and unloading,storage at site, watch and ward etc. including all tax and cess etc complete except GST till completion of project work and handing over to Panipanchayat all complete with due approval of authority as per direction of Engineer-in-charge.
137Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion including cost of T&P, transportation and cess etc complete. Drilling for 200 (8”) dia pipe: From 0 mtr. to 100th meters
138Supply of all Labour & T&P for lowering 200mm dia PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above including cost of fitting & joining materials, cost of T&P, transportation of T&P and cess etc complete as per direction of Engineer-in-Charge.
139Supplying all materials,Labour T & P for packing the bore with washed gravel size (as per advice of Engineer-in-Charge) arround the well screen and pipes in good quality including cost of gravel, transportation, cess, royality,etc complete as per direction Engineer-in-charge. (Example: For 50m depth) =0.786 x (0.4² - 0.2²) x 50mtr = 4.716 say 4.7 cum
140Threading charges of 200mm dia. ASTM(Sch.80) pipes including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
141Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour including cost of T&P, transportation of T&P and cess etc complete as per the direction of Engineer-in-charge.
142PATHAPUR-IV RL:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
143Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
144Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
145Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
146C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
147Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
1482.5cm damp proof Course with Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (hand broken ) including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
149Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
150Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
151Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
152Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in super structure including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
15310cm dry brick khoa well watered & rammed to receive A.S.Flooring including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
1542.5 cm. thick A.S flooring with cement concrete (1:2:4) including punning using 12mm size C.B. chips including at cost etc. complete including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
15512mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
156Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
157Labour charges for fitting of Iron Door (size 1.0x2.0m) including cost of door and fitting materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
158Labour charges for fitting of Iron Ventilator (size 0.45x0.30m) including cost of door and fitting materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
159White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
160Colour washing 2 coats with shell lime over white washing 2 coats with shell lime to walls and ceiling per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
161Priming one coat with any approved primer for iron work including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
162Painting two coats with approved paint on iron work including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
163Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
164Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
165Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
166Labour charges for fitting of Sluice valves & / NRVs along PVC Pipe line & / lifting &/ lowering of pump sets including cost of labour, welding works with consumables, T&P required, transportation to site from site stock yard, cess etc complete except GST.
167Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
168Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
169Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
170Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
171Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
172Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
1737.5 HP Submersible motor pump of 25 mtr head with 900 LPM discharge of reputed brand with BEE Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm flat cable and Impeller: Bronze grade LTB-2 of IS 318/1981 as per IS specification including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
1743x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
1754.00mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
176Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
1774.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
178100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
179Labour charges for laying and fitting of 100 mm dia G.I. pipe complete including cost of labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
180150mm dia C.I. Butter Fly Valve BS:5155/15: 13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
181Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
182Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
183160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
18450mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
185160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
186Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
187Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
188Cost of supplying of 160 mm slipon flange of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
189Labour charges for slotting of 200mm dia PVC (ASTM-D)Sch.-80 Pipe including cost of transportation, cess etc. except GST as per direction of Engineer-in-Charge.
190Supply and fitting of 200mm dia PVC threaded cone including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
191Supply and fitting of 200mm dia PVC threaded Well cap including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
192Supply and fitting of 200mm dia PVC threaded Nipple including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
193Providing of 200 mm dia PVC well casing as per ASTM-D-1785/2004 ( Schedule -80) blue in colour having specific gravity of the materials of the pipe 1.40 to1.46 gms/cc straight length of 3 mtrs PVC Pipes including entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site with loading and unloading,storage at site, watch and ward etc. including all tax and cess etc complete except GST till completion of project work and handing over to Panipanchayat all complete with due approval of authority as per direction of Engineer-in-charge.
194Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion including cost of T&P, transportation and cess etc complete. Drilling for 200 (8”) dia pipe: From 0 mtr. to 100th meters
195Supply of all Labour & T&P for lowering 200mm dia PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above including cost of fitting & joining materials, cost of T&P, transportation of T&P and cess etc complete as per direction of Engineer-in-Charge.
196Supplying all materials,Labour T & P for packing the bore with washed gravel size (as per advice of Engineer-in-Charge) arround the well screen and pipes in good quality including cost of gravel, transportation, cess, royality,etc complete as per direction Engineer-in-charge. (Example: For 50m depth) =0.786 x (0.4² - 0.2²) x 50mtr = 4.716 say 4.7 cum
197Threading charges of 200mm dia. ASTM(Sch.80) pipes including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
198Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour including cost of T&P, transportation of T&P and cess etc complete as per the direction of Engineer-in-charge.
199PATHAPUR-V RL:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
200Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
201Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
202Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
203C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
204Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
2052.5cm damp proof Course with Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (hand broken ) including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
206Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
207Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
208Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
209Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in super structure including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
21010cm dry brick khoa well watered & rammed to receive A.S.Flooring including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
2112.5 cm. thick A.S flooring with cement concrete (1:2:4) including punning using 12mm size C.B. chips including at cost etc. complete including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
21212mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
213Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
214Labour charges for fitting of Iron Door (size 1.0x2.0m) including cost of door and fitting materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
215Labour charges for fitting of Iron Ventilator (size 0.45x0.30m) including cost of door and fitting materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
216White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
217Colour washing 2 coats with shell lime over white washing 2 coats with shell lime to walls and ceiling per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
218Priming one coat with any approved primer for iron work including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
219Painting two coats with approved paint on iron work including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
220Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
221Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
222Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
223Labour charges for fitting of Sluice valves & / NRVs along PVC Pipe line & / lifting &/ lowering of pump sets including cost of labour, welding works with consumables, T&P required, transportation to site from site stock yard, cess etc complete except GST.
224Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
225Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
226Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
227Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
228Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
229Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
2307.5 HP Submersible motor pump of 25 mtr head with 900 LPM discharge of reputed brand with BEE Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm flat cable and Impeller: Bronze grade LTB-2 of IS 318/1981 as per IS specification including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
2313x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
2324.00mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
233Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
2344.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
235100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
236Labour charges for laying and fitting of 100 mm dia G.I. pipe complete including cost of labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
237150mm dia C.I. Butter Fly Valve BS:5155/15: 13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
238Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
239Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
240160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
24150mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
242160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
243Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
244Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
245Cost of supplying of 160 mm slipon flange of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
246Labour charges for slotting of 200mm dia PVC (ASTM-D)Sch.-80 Pipe including cost of transportation, cess etc. except GST as per direction of Engineer-in-Charge.
247Supply and fitting of 200mm dia PVC threaded cone including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
248Supply and fitting of 200mm dia PVC threaded Well cap including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
249Supply and fitting of 200mm dia PVC threaded Nipple including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
250Providing of 200 mm dia PVC well casing as per ASTM-D-1785/2004 ( Schedule -80) blue in colour having specific gravity of the materials of the pipe 1.40 to1.46 gms/cc straight length of 3 mtrs PVC Pipes including entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site with loading and unloading,storage at site, watch and ward etc. including all tax and cess etc complete except GST till completion of project work and handing over to Panipanchayat all complete with due approval of authority as per direction of Engineer-in-charge.
251Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion including cost of T&P, transportation and cess etc complete. Drilling for 200 (8”) dia pipe: From 0 mtr. to 100th meters
252Supply of all Labour & T&P for lowering 200mm dia PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above including cost of fitting & joining materials, cost of T&P, transportation of T&P and cess etc complete as per direction of Engineer-in-Charge.
253Supplying all materials,Labour T & P for packing the bore with washed gravel size (as per advice of Engineer-in-Charge) arround the well screen and pipes in good quality including cost of gravel, transportation, cess, royality,etc complete as per direction Engineer-in-charge. (Example: For 50m depth) =0.786 x (0.4² - 0.2²) x 50mtr = 4.716 say 4.7 cum
254Threading charges of 200mm dia. ASTM(Sch.80) pipes including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
255Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour including cost of T&P, transportation of T&P and cess etc complete as per the direction of Engineer-in-charge.
256KUSPANGI-III RL:Earth work in excavation of foundation in hard soil within 50 m initial lead & 1.5 M initial lift including dressing & levelling the bed & depositing excavated materials within above lead & lift including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
257Filling in F&P with excavated materials including well watered and rammed including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
258Filling in F & P with sand well watered and rammed including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
259Cement concrete (1:4:8) with 4cm (1½”) size hard granite metal C.B. metal of approved quality from approved quarry with required ramming,watering and curring etc. complete including cost, royalty & convence charges of all material to work site, supply of cement,T&P required, royalty etc. complete except GST as per the direction of the Engineer-in-charge.
260C.C. (1:2:4) with 12mm (½”) size hard granite chips (crusher broken) of approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
261Reinforced Cement concrete (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) for RCC works including hoisting and laying with approved quality from approved quarry with ramming, watering and curring etc. complete with cost of all materials involved like supply of cement including cost of all T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
262Supplying, straightening, cutting, bending, binding, fitting,placing and fixing uncoated HYSD bar reinforcement etc complete including supplying, straightening, cutting, bending, binding & tying the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. including cost of HYSD Still Bar (FE 415/ FE 500) and including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
263Rigid smooth centering shuttering for R.C.C. work including false work and dismantling then after casting including cost of all cost etc. complete for R.C.C. floor & Roof slab Landing Balcony, Projection sun shed & Chajja, Shelves Data including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
264Fly ash Brick (25cm X 12cm X 8cm size having crushing strength not less than 75 kg/cm2) masonary in cm(1:6) in F&P including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
26512mm (½\\") thick C.P. (1:6) over brick works. including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
266Cement punning including cost of all materials, T&P required for the work, cost of transportation, cess, royalty etc complete except GST as per instruction of Engineer-in-Charge.
267White washing 2 coats with shell lime per 1 Sqm. including cost of all materials, T&P required for the work, cost of transportation, cess etc complete except GST as per instruction of Engineer-in-Charge.
268Labour charges for letter writting on display board in black colour on yellow back ground painting including cost of material, labour etc. including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
269Cost of laying & fitting of ARV, BFV and Weldless G.I. Tees with distribution pipe line including labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
270Cost of construction of outlet, fitting of short piece of PVC pipe and soil errossion minimisation arrrangements including cost of labour, T&P required, transportation to site stock yard, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
271Labour charges for fitting of Sluice valves & / NRVs along PVC Pipe line & / lifting &/ lowering of pump sets including cost of labour, welding works with consumables, T&P required, transportation to site from site stock yard, cess etc complete except GST.
272Supply of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating including ex-factory rate, entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site stock yard including loading & unloading, storage at site stock yard, watch and ward etc. and handing over to Pani Panchayat President or Secretary with due approval of authority including all taxes and cess etc. complete but excluding cost of GST. Pre-delivery test & Post deliver tests are to be conducted at the facility of CIPET, Bhubaneswar and test reports thus obtained from CIPET, Bhubaneswar are to be submitted to the Engineer-in-Charge.
273Fitting of 160mm dia HDPE PE 80- PN 4 ISI marked High Density Polyethylene (HDPE) Pipes for water supply as per IS-4984/2016 with proper grade and pressure rating with supply of all required accessories materials, labour, T&P for jointing of 160mm dia High Density Polyethylene Pipes by butt fusion welding method as per specification & laying in trenches with desired leveling, testing including fitting and fixing up of required no. of attachments for Outlets and Shaddles and Riser Nipples, fitting air valve, equal Tee etc. complete including cost of transportation from stock yard to work site complete as per direction of the Engineer-in-Charge.
274Earth work in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge.(Mechanical 60% & Manual 40%)
275Filling in F & P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing & breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T&P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% & Manual 40%)
276200×200×200mm Φ P.V.C Equal Tee (W.P 4Kg/Cm2) conforming to IS-4995/ 1988 with latest amendment including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
277Electrical Earthing including including cost of materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
278Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, T&P required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
2797.5 HP Submersible motor pump of 25 mtr head with 900 LPM discharge of reputed brand with BEE Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm flat cable and Impeller: Bronze grade LTB-2 of IS 318/1981 as per IS specification including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
2803x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
2814.00mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
282Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
2834.0 mm2 PVC Single Core Copper Wire ISI mark of reputed Company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
284100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
285219mm dia M.S.Pipe (6.30mm thickness) IS 3589:2001 with ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
286Labour charges for laying and fitting of 100 mm dia G.I. pipe complete including cost of labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
287Cost of laying, welding and fitting of 200 mm dia M.S.. pipe complete including cost of welding materials, labour, T&P required, transportation to site from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge.
288Nuts and Bolts including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
289Thick Rubber Insertion 3mm thick including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
29012mm thick M.S.Plate Flange 200mm dia ISI mark of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
291160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
292200mmx200mmx110mm dia Weldless G.I.Tee (3.6mm thickness and min. height of 1.2 mtr.) with bend, closing and opening arrangement of reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
29350mm dia C.I.Air Release Valve (single action) with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark from reputed company including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
294160mm dia. HDPE Bend including cost of material, transportation, cess etc. complete except GST
295Cost of supplying of 160 MM HDPE End cap of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
296Cost of supplying of 160X160X160 mm HDPE Tee spigot design 6 kgof ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST.
297Labour charges for slotting of 200mm dia PVC (ASTM-D)Sch.-80 Pipe including cost of transportation, cess etc. except GST as per direction of Engineer-in-Charge.
298Supply and fitting of 200mm dia PVC threaded cone including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
299Supply and fitting of 200mm dia PVC threaded Well cap including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
300Supply and fitting of 200mm dia PVC threaded Nipple including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
301Providing of 200 mm dia PVC well casing as per ASTM-D-1785/2004 ( Schedule -80) blue in colour having specific gravity of the materials of the pipe 1.40 to1.46 gms/cc straight length of 3 mtrs PVC Pipes including entire cost involved in Pre-delivery test & Post delivery test with correspoding test marking on the body of pipes along with name & address of manufacturer, cost of transportation from factory to project site with loading and unloading,storage at site, watch and ward etc. including all tax and cess etc complete except GST till completion of project work and handing over to Panipanchayat all complete with due approval of authority as per direction of Engineer-in-charge.
302Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion including cost of T&P, transportation and cess etc complete. Drilling for 200 (8”) dia pipe: From 0 mtr. to 100th meters
303Supply of all Labour & T&P for lowering 200mm dia PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above including cost of fitting & joining materials, cost of T&P, transportation of T&P and cess etc complete as per direction of Engineer-in-Charge.
304Supplying all materials,Labour T & P for packing the bore with washed gravel size (as per advice of Engineer-in-Charge) arround the well screen and pipes in good quality including cost of gravel, transportation, cess, royality,etc complete as per direction Engineer-in-charge. (Example: For 50m depth) =0.786 x (0.4² - 0.2²) x 50mtr = 4.716 say 4.7 cum
305Threading charges of 200mm dia. ASTM(Sch.80) pipes including cost of material, transportation, cess etc. complete except GST as per instruction of Engineer-in-Charge.
306Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour including cost of T&P, transportation of T&P and cess etc complete as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58605250
AUTHORITY Government Departments
TENDER VALUE 55.35 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender for Reinforcement Of Gopa-Ii Rl, Satakhanda-I Rl, Satakhanda-Ii Rl, Pathapur-Iv Rl, Pathapur-V Rl & Kuspangi-Iii Rl L.I. Projects Of Banki Block In Kataka District Under State Plan 2026-27(Ren)
Basic Detail
Tender No BID ID NO.22/Dt.13.11.2026
Bidding Type Tender
Location
City Cuttack
State Odisha
Key Dates
Publish Date 19 Nov 2026
Submission Date 03 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value 55.35 Lakhs
Tender Fee 11800
EMD 55358
Exemption Available
Document List
58e91541-98a2-42be-a7c9-7fedd48ce8f8.html
BOQ_621741.xls
DTCNFINAL22.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

58e91541-98a2-42be-a7c9-7fedd48ce8f8.html

xls

BOQ_621741.xls

pdf

DTCNFINAL22.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender