Housing Urban and Rular Development Government Departments Closing in 12 days TDR #58604973

Tender For Special Repairs To Flooring, Painting, Water Supply And Sanitary Arrangements To The Government High School Devanampalayam In Coimbatore District.

Issued by Government Departments · Coimbatore, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Dec 2026
12 days left
EMD
3500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Special Repairs To Flooring, Painting, Water Supply And Sanitary Arrangements To The Government High School Devanampalayam In Coimbatore District.

BOQ

Name of Work:- SPECIAL REPAIRS TO FLOORING, PAINTING, WATER SUPPLY AND SANITARY ARRANGEMENTS TO THE GOVERNMENT HIGH SCHOOL DEVANAMPALAYAM IN COIMBATORE DISTRICT.
Sl. No. Item Description
1Dismantling clearing away the damaged BRICK WORK IN CEMENT MORTAR and carefully stacking materials useful for reuse etc, as directed by the departmental officers as per standard specification
2Dismantling clearing away the damaged PLAIN CEMENT CONCRETE and carefully stacking materials useful for reuse etc, as directed by the departmental officers as per standard specification
3Clean removal of damaged CEMENT PLASTER from walls as directed by the departmental officers as per standard specification
4EARTH WORK OPEN EXCAVATION by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.
5PLAIN CEMENT CONCRETE 1:5:10 (One cement, five M - sand and ten aggregate) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers.
6Construction BRICKWORK in cement mortar 1:5 (One cement and five M - sand) using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge.
7FOR FOUNDATION AND BASEMENT.
8PLAIN CEMENT CONCRETE 1:5:10 (One cement, five M - sand and ten aggregate) using Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers
9Supply and filling in foundation and basement with Gravel with Lead in 5Km in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
10PLAIN CEMENT CONCRETE 1:2:4 (One cement, two M - sand and four aggregate) using 20 mm gauge hand broken hard granite stone jelly for WEARING COAT including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification.
11Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.
12Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)
13Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
14Manufacturing supplying and fixing of Fully Panelled steel door (SINGLE LEAF) with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. - Single leaf
15Supplying, Fabricating and fixing of SQUARE TUBE for Trusses and Purlins of required sizes ' L ' angles including with necessary M.S. Channels, ' L ' angles, M.S. Plate as per the approved special designed including cost of materials and labour charges for cutting angle, welding charges including cost of welding rod conveyance charges at site of work including cost of one coat of red oxide primer etc., complete and as directed by the departmental officers.
16Flooring with ceramic tiles of size 305 X 305 X 6mm and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
17Dadooing walls with following best approved quality, colour glazed tiles conforming to IS 15622 of size 300 X 200 X 6mm in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
18Construction of inspection chamber of clear size 0.60 X 0.60m including earth work excavation, CC 1:5:10 of 10cm thick and Fly Ash brick work in cement mortar 1:5 [one cement and five M - sand] using best quality of Fly Ash bricks of size 23 X 11X 7cm with plastering with cement mortar 1:3 [one cement and three P - sand] 12mm thick to inner and outer sides and wearing coat 1:3:6 [one cement, three M - sand and six aggregate] 15cm thick and covered with precast slab 5cm thick etc., complete complying as directed by the departmental officers as per standard specification.
19Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply Above ground level.
2025mm diametre UPVC Pipe
21Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements complete complying as directed by the department officers as per standard specification.Note:- Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separte provision for fixing UPVC specials needs to be allowed.
2225mm diametre U.P.V.C ELBOW.
2325mm diametre U.P.V.C TEE.
2425mm diametre U.P.V.C COUPLER.
2525 X 20mm diametre UPVC REDUCER.
26Renewing and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
27Supplying and fixing in position best quality P.V.C. SOIL / WASTE PIPES of following sizes having I.S.I mark and providing leak proof joints including fixing to walls with Specials / PVC /MS. clamps etc., and making connection to all sanitary fittings,dismantling the masonry / RCC works wherever necessary and making good the dismantled portion to original condition etc., complete complying with standard specification.[The PVC pipe should be got approved by the Executive Engineer before use on works.]
28110 mm diametre PVC SOIL PIPE [ 6Kg / Cm2]
29Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
30110 mm diametre PVC PLAIN ELBOW.
31110 mm diametre PVC TEE.
32110 mm diametre PVC TEE.
33White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.
34GST 18% (CGST AT 9% + SGST AT 9%) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58604973
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 03-12-2026
Authority
Authority Name Public Works Department
Work Description Tender for Special Repairs To Flooring, Painting, Water Supply And Sanitary Arrangements To The Government High School Devanampalayam In Coimbatore District.
Basic Detail
Tender No 04/13N/CBE-DVN /2026-27
Bidding Type Tender
Location
City Coimbatore
State Tamil Nadu
Key Dates
Publish Date 19 Nov 2026
Submission Date 03 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 3500
Exemption Not Available
Document List
54cc5efb-d20c-421d-91dc-1dc51e7f7f81.html
BOQ_873384.xls
TenderDocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

54cc5efb-d20c-421d-91dc-1dc51e7f7f81.html

xls

BOQ_873384.xls

pdf

TenderDocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender